<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I think the audio out lines on the back plane are de-emphasized or
flat to 3k then it rolls off. Either way In this case that is not
what you want. If you were connecting to a hardware controller and
using the cas/RX mute then it works just fine. <br>
In the case of using DSP squelch and DSP L decode by the fob/ URI it
must be connected to the Discriminator. You could also set your
node to speaker out instead of flat and use the USB for the cas
connection. That should work too. <br>
<br>
I personally like using the DSP Squelch and DSP tone as it is very
quick - no squelch busts! That is... if you have the RX squelch set
right. <span class="moz-smiley-s3"><span> ;-) </span></span><br>
<br>
Jon<br>
<br>
On 10/6/2010 9:19 AM, Corey Dean N3FE wrote:
<blockquote
cite="mid:4BCC91CBCFD66C4489B4BD3233140C3E3B5B41458C@exchange.mail.repeater.net"
type="cite">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
<meta name="Generator" content="Microsoft Word 12 (filtered
medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
color:black;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";
color:black;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;
color:black;}
span.EmailStyle20
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
-->
</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);">This
is making some sense
now. I did pull off the back plane but I never traced it
back to see
where exactly it was coming from. Many moons ago I followed
the Scom 7k
to Master II hookup info. I have always just used that same
spot on all
other controllers in the past without an issue and excellent
audio. I will
give that a try tonight. I know what pin you are referring
to. It
would be the same pin that you would use in a mobile
conversion and it is also
available where the stock PL board would plug in. <o:p></o:p></span></p>
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);">Thanks
and I will give it a try
this evening!<o:p></o:p></span></p>
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);">Corey<o:p></o:p></span></p>
<p class="MsoNormal"><span style="color: rgb(31, 73, 125);"><o:p> </o:p></span></p>
<div>
<div style="border-right: medium none; border-width: 1pt
medium medium; border-style: solid none none; border-color:
rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color;
padding: 3pt 0in 0in;">
<p class="MsoNormal"><b><span style="font-size: 10pt;
font-family:
"Tahoma","sans-serif"; color:
windowtext;">From:</span></b><span style="font-size:
10pt; font-family:
"Tahoma","sans-serif"; color:
windowtext;"> <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users-bounces@qrvc.com">app_rpt-users-bounces@qrvc.com</a>
[<a class="moz-txt-link-freetext" href="mailto:app_rpt-users-bounces@qrvc.com">mailto:app_rpt-users-bounces@qrvc.com</a>] <b>On Behalf Of
</b>Jon Rorke<br>
<b>Sent:</b> Wednesday, October 06, 2010 8:35 AM<br>
<b>To:</b> APP_RPT_Users<br>
<b>Subject:</b> Re: [App_rpt-users] Using a Master II<o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">I have set up a Master II repeater station
in full duplex
mode using a URI for dsp squelch and dsp pl decode and it
works just fine. The
main thing is to connect it to the volume/squelch hi (raw
discriminator) or you
will have problems. The master II should be able to give you
1V p-p output with
1k tone @ 3k dev on the volumw/squelch hi which is not
available on the back
plane. You have to pull it off one of the connectors on the
drawer. Have to
check my notes on what pin. <br>
<br>
Any way I have a couple of units working in this manner with
no problems.<br>
<br>
Jon VA3RQ<br>
<br>
On 10/6/2010 7:46 AM, Corey Dean N3FE wrote: <o:p></o:p></p>
<p class="MsoNormal">So I have been using a GE Master II
repeater (actual
repeater, not a converted mobile) for the allstar node in full
duplex repeater
mode. I noticed it just doesn’t dig too well when using the
fob to
decode the PL. I have a maxtrac on another fob and that will
dig into the
noise great. As a test I hooked up a ts32 and ran the output
of that in
the CAS/COR on the fob and it worked great! I want to try to
get the
built in decoder working correctly though. Another friend of
mine is also
running a GE Master II and he is having the same problem.
When we run the
rxnoise level from either the radio-tune-menu or using the
radio tune command
from asterisk it always fails. Anyone have any suggestions on
a way to
resolve this? I have another use for my hardware pl decoder
so I
would like to get the USB Frob working correctly!!!!<o:p></o:p></p>
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal">Corey N3FE <o:p></o:p></p>
<pre><o:p> </o:p></pre>
<pre><o:p> </o:p></pre>
<pre>_______________________________________________<o:p></o:p></pre>
<pre>App_rpt-users mailing list<o:p></o:p></pre>
<pre><a moz-do-not-send="true" href="mailto:App_rpt-users@qrvc.com">App_rpt-users@qrvc.com</a><o:p></o:p></pre>
<pre><a moz-do-not-send="true" href="http://qrvc.com/mailman/listinfo/app_rpt-users">http://qrvc.com/mailman/listinfo/app_rpt-users</a><o:p></o:p></pre>
<p class="MsoNormal"><span style="font-size: 12pt; font-family:
"Times New Roman","serif";"><br>
-- <br>
This message was scanned and is believed to be clean. <br>
<a moz-do-not-send="true"
href="%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=EE03B2FAF0.AED75%0d%0a">Click
here
to report this message as spam.</a> <o:p></o:p></span></p>
</div>
</blockquote>
</body>
</html>