<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
Yes, that *is* a good point. wget on Limey Linux doesnt support<br>https:, but curl does. Steve didnt think (rather logically so) that it<br>was necessary to go to the trouble of making wget do that when<br>curl works perfectly well.<br><br>Sorry for overlooking this in the instructions. I should have taken this<br>info consideration as part of the cut-over from http to https on 8/15.<br>I will fix the docs to reflect this.<br><br>btw, I already re-built the 2065/2066 node image and Marshall already<br>has the link to download it and burn it onto a flash.<br><br>JIM<br><br>> Date: Mon, 11 Oct 2010 20:12:37 -0700<br>> From: rhammock.hur@gmail.com<br>> To: app_rpt-users@qrvc.com<br>> Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!<br>> <br>> I've tried several times to use the procedure outlined in the link<br>> provided below. As far as I know, I've applied the "special" patches<br>> that are supposed to allow wget to download the svn-trunk.tar.gz file<br>> on a Limey Linux box (brand new install) to no avail. Transcript<br>> follows:<br>> <br>> [root@test usr]# wget http://allstarlink.org/svn-trunk.tar.gz<br>> --19:52:24-- http://allstarlink.org/svn-trunk.tar.gz<br>> => `svn-trunk.tar.gz'<br>> Resolving allstarlink.org... 67.215.233.179<br>> Connecting to allstarlink.org|67.215.233.179|:80... connected.<br>> HTTP request sent, awaiting response... 301 Moved Permanently<br>> Location: https://allstarlink.org/svn-trunk.tar.gz [following]<br>> https://allstarlink.org/svn-trunk.tar.gz: Unsupported scheme.<br>> <br>> This is on LL:<br>> <br>> Limey-linux micro linux distribution version 1.1.0<br>> <br>> I usually end up downloading the svn-trunk.tar.gz on another system<br>> then scp over to the Limey Linux box I'm building.<br>> <br>> Basically, I'm rebuilding node 2065/2066 for CalNet to bring them up<br>> to the latest version. It will be manual configuration (Jim knows<br>> why).<br>> <br>> Any Ideas why wget won't work to get the latest stuff?<br>> <br>> <br>> On Sun, Oct 10, 2010 at 12:42 PM, Jim Duuuude <telesistant@hotmail.com> wrote:<br>> > Probably the easiest to follow the instructions in the following:<br>> ><br>> > https://allstarlink.org/support.html#astupgrade<br>> ><br>> >> Date: Sun, 10 Oct 2010 19:37:36 +0100<br>> >> From: specialq.que@ntlworld.com<br>> >> To: app_rpt-users@qrvc.com<br>> >> Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!<br>> >><br>> >> Hello Jim,<br>> >><br>> >> Can you please post the necessary steps to obtain and install said file<br>> >> in simple terms please.<br>> >><br>> >> Thank you,<br>> >> D<br>> >><br>> >><br>> >> On 10/10/2010 19:30:49, Jim Duuuude (telesistant@hotmail.com) wrote:<br>> >> > I discovered (not with any help from the lack of documentation from<br>> >> C-media) that the 'HOOK' signal is<br>> >> > actually available to be read (but not written). Therefore, the<br>> >> "GPIO2" signal can at least now be used<br>> >> > as an input.<br>> >> ><br>> >> > The code revision (chan_usbradio.c) to support this should be<br>> >> available via SVN at abut 12:15 PDT today (when the public<br>> >> > SVN server updates).<br>> >> ><br>> >> > Well, it's better then nothing......<br>> >> ><br>> >> > JIM WB6NIL<br>> >><br>> >> _______________________________________________<br>> >> App_rpt-users mailing list<br>> >> App_rpt-users@qrvc.com<br>> >> http://qrvc.com/mailman/listinfo/app_rpt-users<br>> ><br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@qrvc.com<br>> > http://qrvc.com/mailman/listinfo/app_rpt-users<br>> ><br>> ><br>> <br>> <br>> <br>> -- <br>> Randy Hammock KC6HUR<br>> http://kc6hur.net/~rhammock<br>> IRLP 4494 / ALLSTAR 2035<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@qrvc.com<br>> http://qrvc.com/mailman/listinfo/app_rpt-users<br> </body>
</html>