<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
it was!! :-)<br><br>> Date: Mon, 24 Jan 2011 00:27:16 +0200<br>> Subject: RE: [App_rpt-users] aprs password for app_gps<br>> From: yo3iiu@yo3iiu.ro<br>> To: telesistant@hotmail.com<br>> CC: yo3iiu@yo3iiu.ro; rpt2@chuck.midlandsnetworking.com; app_rpt-users@ohnosec.org<br>> <br>> The protocol is quite simple and the source for callpass is included in<br>> the xastir source. Though, reverse engineering it seems a lot more fun :)<br>> <br>> Regards,<br>> Bogdan - YO3IIU<br>> <br>> ><br>> > The heck with all this confusion regarding APRS passwords!!<br>> ><br>> > I just reverse engineered the password algorithm and will make<br>> > a password generator (and will also automatically generate a password<br>> > for Portal-generate configurations).<br>> ><br>> > JIM<br>> ><br>> >> Date: Sun, 23 Jan 2011 15:49:55 +0200<br>> >> From: yo3iiu@yo3iiu.ro<br>> >> To: rpt2@chuck.midlandsnetworking.com<br>> >> CC: app_rpt-users@ohnosec.org<br>> >> Subject: Re: [App_rpt-users] aprs password for app_gps<br>> >><br>> >> The APRS-IS password could be generated using the callpass utility that<br>> >> comes with xastir.<br>> >><br>> >> Bogdan - YO3IIU<br>> >><br>> >> > I would like to set up my allstarlink system to report position<br>> >> > information<br>> >> > to the aprs system.<br>> >> ><br>> >> > Can someone tell me how to set up this password? Also, are the<br>> >> default<br>> >> > server and port listed in the example below what should be used?<br>> >> > I have searched the aprs site and couldn't find who to request this<br>> >> > information from.<br>> >> ><br>> >> > Chuck Henderson, WB9UUS<br>> >> ><br>> >> ><br>> >> >><br>> >> >> ; Configuration for app_gps<br>> >> >> ;<br>> >> >> [general]<br>> >> >><br>> >> >> call = wb9uus-2 ; callsign (including SSID) for APRS<br>> >> purposes*password<br>> >> >> = 12345 ; Password for APRS-IS server for above callsign*<br>> >> >> comment = AllStar Node 27468 ; Text to be displayed associated with<br>> >> this<br>> >> >> station*server = second.aprs.net ; APRS-IS server to report<br>> >> information<br>> >> >> to**port = 10151 ; port on server to send data*<br>> >> >> icon = r ; A CAR (default) Icon do be displayed for station on<br>> >> APRS<br>> >> >> display (see below)<br>> >> >> comport = /dev/ttyS0 ; Serial port for GPS receiver (specify this<br>> >> only<br>> >> >> if using GPS receiver)<br>> >> >> baudrate = 4800 ; Baud rate for GPS receiver (specify this only if<br>> >> >> using GPS receiver)<br>> >> >> ;debug = y ; set this for debug output<br>> >> >> freq=442.700 ; Display Frequency of station<br>> >> >> tone=107.2 ; CTCSS tone of station (0.0 for none)<br>> >> >> lat=40.508 ; Fixed (default) latitude in decimal degrees<br>> >> >> lon=-88.988 ; Fixed (default) longitude in decimal degrees<br>> >> >> elev=123.4 ; Elevation of Antenna in Meters (*NOT* HAAT)<br>> >> >> power=9 ; Power level (see below)<br>> >> >> height=5 ; Antenna Height in HAAT (see below)<br>> >> >> gain=8 ; Antenna Gain (see below)<br>> >> >> dir=0 ; Antenna Direction (see below)<br>> >> >><br>> >> >> On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude<br>> >> >> <telesistant@hotmail.com>wrote:<br>> >> >><br>> >> >>> There have (obviously) been some changes/improvements made to the<br>> >> >>> Echolink and APRS/GPS subsystems within app_rpt.<br>> >> >>><br>> >> >>> Included in these is the ability for a node to report its "fixed"<br>> >> GPS<br>> >> >>> coordinates<br>> >> >>> to the APRS network, even if it does not have a GPS receiver<br>> >> connected.<br>> >> >>><br>> >> >>> Please see the following:<br>> >> >>><br>> >> >>> Setting up Echolink Connectivity<br>> >> >>> http://209.159.155.200/drupal/node/56<br>> >> >>><br>> >> >>> Setting Up APRS and GPS Configuration<br>> >> >>> http://209.159.155.200/drupal/node/179<br>> >> >>><br>> >> >>> Of course, the latest copies of app_gps and chan_echolink need to be<br>> >> >>> downloaded from the SVN.<br>> >> >>><br>> >> >>> JIM WB6NIL<br>> >> >>><br>> >> >>><br>> >> >>><br>> >> >><br>> >> > _______________________________________________<br>> >> > App_rpt-users mailing list<br>> >> > App_rpt-users@ohnosec.org<br>> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >> ><br>> >><br>> >><br>> >> _______________________________________________<br>> >> App_rpt-users mailing list<br>> >> App_rpt-users@ohnosec.org<br>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> <br>> <br> </body>
</html>