<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3698" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff><FONT face=Arial size=4>
<DIV>I played around with this a little bit today... Seems like you have to
use:</DIV>
<DIV>rxchannel = Simpleusb/usb rather than:</DIV>
<DIV>rxchannel = SimpleUSB/usb.</DIV>
<DIV> </DIV>
<DIV>I could be wrong, but it also seems that the parallel port support isn't
included in simpleusb? I did observe a substantial decrease in processor
usage. </DIV>
<DIV> </DIV>
<DIV>Too bad it's not as simple as DSP=0 or DSP=1 to enable/disable the DSP
techniques in chan_usb... hi hi</DIV>
<DIV> </DIV>
<DIV>73,</DIV>
<DIV> </DIV>
<DIV>Kyle</DIV>
<DIV>K0KN</DIV>
<DIV><PRE>--- Original Message ---</PRE><PRE>I think all you have to do is this.....
rpt.conf: (snip)
[2532] ; Change this to your assigned node number
rxchannel = SimpleUSB/usb ; Rx audio/signalling channel
simpleusb.conf: (entire file)
;
; SimpleUSB configuration
;
</PRE></FONT></DIV></BODY></HTML>