<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
the parallel port stuff has not been ported to it as of yet<br><br>> Date: Tue, 15 Feb 2011 22:44:41 -0500<br>> Subject: RE: [App_rpt-users] Beagleboard and USB URI dongle<br>> From: steve@michiganbroadband.com<br>> To: telesistant@hotmail.com<br>> CC: steve@michiganbroadband.com; app_rpt-users@ohnosec.org<br>> <br>> Thanks Jim,<br>> <br>> I meant CTCSS (haha)<br>> <br>> -and does the Parallel port stuff work just fine with it? (simpleusb)<br>> <br>> Someone indicated earlier that they thought it might not.<br>> <br>> I'll be trying it in a few hours.<br>> <br>> Steve<br>> <br>> <br>> <br>> <br>> <br>> <br>> <br>> ><br>> > yep, that is correct<br>> ><br>> > JIM<br>> ><br>> >> Date: Tue, 15 Feb 2011 16:42:23 -0500<br>> >> From: steve@michiganbroadband.com<br>> >> To: steve@michiganbroadband.com<br>> >> CC: app_rpt-users@ohnosec.org<br>> >> Subject: Re: [App_rpt-users] Beagleboard and USB URI dongle<br>> >><br>> >> OK so do I have it correct?<br>> >><br>> >> chan_simpleusb<br>> >><br>> >> * Does not do carrier detect (via DSP noise detection) must use COR<br>> >> logic.<br>> >> * Does not do CTSCC Decode (obviously).<br>> >> * DTMF is handled by Zaptel so we still decode DTMF in asterisk.<br>> >><br>> >> * encode functions are same as before?<br>> >><br>> >> * enabling/using it is by simply specifyinfg it in rpt.conf<br>> >><br>> >> rxchannel = SimpleUSB/usb<br>> >><br>> >> and the presense and setup of simpleusb.conf<br>> >><br>> >> Thanks!<br>> >> Steve<br>> >><br>> >><br>> >><br>> >><br>> >><br>> >> -Steve<br>> >><br>> >><br>> >><br>> >><br>> >><br>> >><br>> >><br>> >><br>> >> ><br>> >> >> So does this mean you can run App_rpt & Asterisk on the WRT 54GL????<br>> >> > No! :-)<br>> >> ><br>> >> > it only means I have an idea and was using that as an exaple on where<br>> >> > something like the simplesb channel driver might come in handy.<br>> >> ><br>> >> ><br>> >> ><br>> >> ><br>> >> >><br>> >> >> Dont get me wrong, It would be great to run App_Rpt on the 54 GL. I<br>> >> have<br>> >> >> a number of them.<br>> >> >><br>> >> >> But how would you do a radio interface? I dont see any USB ports on<br>> >> any<br>> >> >> of my 54GLs.<br>> >> ><br>> >> > There's not.<br>> >> ><br>> >> ><br>> >> ><br>> >> >><br>> >> >> I'm playing around with the Intel D510 MB with a 32 G SSD and have 3<br>> >> >> Allstar nodes running on the board with URIs in full duplex with DSP<br>> >> >> Squelch and PL.<br>> >> >><br>> >> >> I had 4 on there and it seemed ok but the load ave hit 1.2! so I took<br>> >> >> out one node and now seems ok with the 3.<br>> >> >><br>> >> >> Perhaps using chan_simpleUSB might clear that up.<br>> >> >><br>> >> >> Nice low power package but cost a few bucks~($325 CDN) but solid<br>> >> package<br>> >> >> and yes there is a fan in the enclosure so heat doesnt seem to be a<br>> >> >> problem.<br>> >> >><br>> >> >> But I would like to know about what you had in mind on the 54GL.<br>> >> ><br>> >> > All that I had in mind at this point was looking into it. :-)<br>> >> > As I have som many of them around here.<br>> >> ><br>> >> > :-)<br>> >> ><br>> >> > -Steve<br>> >> ><br>> >> ><br>> >> ><br>> >> ><br>> >> ><br>> >> >><br>> >> >> Jon VA3RQ<br>> >> >><br>> >> >><br>> >> >><br>> >> >><br>> >> >> On 2/15/2011 1:44 PM, Steve Gladden wrote:<br>> >> >>> Also Jim, THANK YOU! for creating this interface type..<br>> >> >>> There are many cases where I'd prefer NOT to do DSP on the PC /Board<br>> >> >>> puter.<br>> >> >>><br>> >> >>> Especially when using older/smaller stuff.<br>> >> >>><br>> >> >>> Such as a WRT54GL<br>> >> >>><br>> >> >>><br>> >> >>> -Steve<br>> >> >>><br>> >> >>><br>> >> >>><br>> >> >>><br>> >> >>>> chan_simpleusb is basically a 'gutted' version of chan_usbradio. It<br>> >> >>>> has<br>> >> >>>> no<br>> >> >>>> DSP functionality whatsoever.<br>> >> >>>> It is designed for radios that provide COR and/or CTCSS detection<br>> >> >>>> signals,<br>> >> >>>> and will run FAR more efficiently<br>> >> >>>> allowing for use on MUCH slower CPUs.<br>> >> >>>><br>> >> >>>> JIM WB6NIL<br>> >> >>>><br>> >> >>>> From: yokshs@sbcglobal.net<br>> >> >>>> To: app_rpt-users@ohnosec.org<br>> >> >>>> Date: Tue, 15 Feb 2011 09:05:51 -0600<br>> >> >>>> Subject: [App_rpt-users] Beagleboard and USB URI dongle<br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>> I'm curious about chan_simpleusb. Can it be used on a slower PC to<br>> >> >>>> improve<br>> >> >>>> performance?<br>> >> >>>><br>> >> >>>> I'm running 2 CM108 fobs here on a P3/866 MHz with 512MB ram. This<br>> >> was<br>> >> >>>> my<br>> >> >>>> old EchoIRLP node PC, and it seems to<br>> >> >>>> work ok for Allstar, but I realize that it's below the recommended<br>> >> CPU<br>> >> >>>> speed for a USB fob node.<br>> >> >>>><br>> >> >>>> My node radios have PL encode/decode in hardware, etc, so would I<br>> >> lose<br>> >> >>>> any<br>> >> >>>> functionality by switching to chan_simpleusb?<br>> >> >>>><br>> >> >>>> Thanks.73<br>> >> >>>><br>> >> >>>> Kyle<br>> >> >>>> K0KN<br>> >> >>>> --- Original Message ---Yes, it works quite beautifuly with the<br>> >> URI,<br>> >> >>>> in<br>> >> >>>> fact it will support 2 of them<br>> >> >>>> *BUT* only with chan_simpleusb. The CPU does not have the<br>> >> horsepower<br>> >> >>>> to do the DSP routines used in chan_usbradio.<br>> >> >>>><br>> >> >>>> Why dont you wait for the LOX board to become available in<br>> >> production?<br>> >> >>>> It wont be long.<br>> >> >>>><br>> >> >>>> JIM WB6NIL<br>> >> >>>><br>> >> >>>><br>> >> >>>><br>> >> >>>> _______________________________________________<br>> >> >>>> App_rpt-users mailing list<br>> >> >>>> App_rpt-users@ohnosec.org<br>> >> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >> >>>> --<br>> >> >>>> This message has been scanned for viruses and<br>> >> >>>> dangerous content by MailScanner, and is<br>> >> >>>> believed to be clean.<br>> >> >>>><br>> >> >>>> _______________________________________________<br>> >> >>>> App_rpt-users mailing list<br>> >> >>>> App_rpt-users@ohnosec.org<br>> >> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >> >>>><br>> >> >>><br>> >> >>> Michigan Broadband Systems Inc.<br>> >> >>> "Always Connected"<br>> >> >>><br>> >> >>> (734)527-7150<br>> >> >>><br>> >> >>> Steve's cellphone: (734)904-1811<br>> >> >>><br>> >> >>><br>> >> >> _______________________________________________<br>> >> >> App_rpt-users mailing list<br>> >> >> App_rpt-users@ohnosec.org<br>> >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >> >><br>> >> >> --<br>> >> >> This message has been scanned for viruses and<br>> >> >> dangerous content by MailScanner, and is<br>> >> >> believed to be clean.<br>> >> >><br>> >> ><br>> >> ><br>> >> > Michigan Broadband Systems Inc.<br>> >> > "Always Connected"<br>> >> ><br>> >> > (734)527-7150<br>> >> ><br>> >> > Steve's cellphone: (734)904-1811<br>> >> ><br>> >> ><br>> >> > --<br>> >> > This message has been scanned for viruses and<br>> >> > dangerous content by MailScanner, and is<br>> >> > believed to be clean.<br>> >> ><br>> >> > _______________________________________________<br>> >> > App_rpt-users mailing list<br>> >> > App_rpt-users@ohnosec.org<br>> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >> ><br>> >><br>> >><br>> >> Michigan Broadband Systems Inc.<br>> >> "Always Connected"<br>> >><br>> >> (734)527-7150<br>> >><br>> >> Steve's cellphone: (734)904-1811<br>> >><br>> >><br>> >> --<br>> >> This message has been scanned for viruses and<br>> >> dangerous content by MailScanner, and is<br>> >> believed to be clean.<br>> >><br>> >> _______________________________________________<br>> >> App_rpt-users mailing list<br>> >> App_rpt-users@ohnosec.org<br>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> > --<br>> > This message has been scanned for viruses and<br>> > dangerous content by MailScanner, and is<br>> > believed to be clean.<br>> ><br>> ><br>> <br>> <br>> Michigan Broadband Systems Inc.<br>> "Always Connected"<br>> <br>> (734)527-7150<br>> <br>> Steve's cellphone: (734)904-1811<br>> <br>> <br>> -- <br>> This message has been scanned for viruses and<br>> dangerous content by MailScanner, and is<br>> believed to be clean.<br>> <br> </body>
</html>