<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
Dont run chan_usbradio on Pickle. Dont even have a usbradio.conf file in your directory.<br><br>Try "susb active"<br>and "susb tune." .. etc<br><br>JIM<br><br>> Date: Sat, 5 Mar 2011 15:37:17 -0800<br>> From: phil.n6tct@gmail.com<br>> To: app_rpt-users@ohnosec.org<br>> Subject: [App_rpt-users] Beagleboard URI issue: "device usb27674 currently not active"<br>> <br>> Gang, I would love whatever help your collective brains and experience<br>> can provide on the following newbie problem.<br>> <br>> I recently brought up a generic PC running ACID and a USB URI fob and<br>> made it all work. Yay! Emboldened by my success :-) I thought I<br>> would try getting my beagleboard running in a similar configuration<br>> ... and so far, failed. The URI green LED blinks like it should when<br>> asterisk starts. But asterisk CLI "radio key" and "radio unkey" don't<br>> do anything (i.e., they do not turn on or off the URI fob's red LED).<br>> Attempting to run "radio tune txvoice 500" generates the error "Device<br>> usb27674 currently not active". (27674, of course, is the node number<br>> for this system.) Running "radio active usb27674" does not give an<br>> error but does not change anything (i.e., radio tune still fails with<br>> the same error message).<br>> <br>> I suspect it is just some simple configuration thing I have overlooked<br>> and would greatly appreciate any thoughts. --Phil, N6TCT<br>> <br>> Details:<br>> <br>> Beagleboard hardware is a beagleboard-xM, assy rev B, at 1 GHz.<br>> <br>> OS is pickle linux: Linux version 2.6.35.4 (root@pickle) (gcc version<br>> 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #5 PREEMPT Wed Dec 29 04:03:36 UTC<br>> 2010 ()<br>> <br>> URI is a DMK URI; I have two of them and have tried both of them, same<br>> behavior. Both work fine on my PC system.<br>> <br>> Asterisk configuration: I first downloaded files from the allstar link<br>> network and then modified by hand to use the simpleusb channel. I<br>> have included my usbradio.conf, simpleusb.conf, and rpt.conf below.<br>> (Is it true that I actually need both usbradio.conf and<br>> simpleusb.conf?)<br>> <br>> When the system boots it finds the URI:<br>> <br>> [ 68.294250] generic-usb 0003:0D8C:013C.0002: input: USB HID v1.00<br>> Device [C-Media Electronics Inc. USB PnP Sound Device ]<br>> on usb-ehci-omap.0-2.4/input3<br>> <br>> When asterisk starts it logs messages I would expect (esp. since I<br>> can't tune the radio):<br>> <br>> [Mar 5 23:14:00] NOTICE[775] app_rpt.c: Normal Repeater Init 27674<br>> [Mar 5 23:14:00] NOTICE[793] chan_simpleusb.c: Assigned USB device 1-2.4:1.0 to<br>> simpleusb channel usb27674<br>> [Mar 5 23:14:00] WARNING[793] chan_simpleusb.c: File simpleusb_tune_usb27674.co<br>> nf not found, device usb27674 using default parameters.<br>> <br>> As mentioned, radio key and radio unkey do not give errors but neither<br>> do they do anything on the URI fob. Radio tune gives an error:<br>> <br>> peekskill*CLI> radio active<br>> Active (command) USB Radio device is [usb27674]<br>> peekskill*CLI> radio key <-- note no error<br>> peekskill*CLI> radio unkey <-- note no error<br>> peekskill*CLI> radio tune txvoice 500<br>> Device usb27674 currently not active<br>> peekskill*CLI> radio active<br>> Active (command) USB Radio device is [usb27674]<br>> peekskill*CLI> radio active usb27674<br>> Active (command) USB Radio device set to [usb27674]<br>> peekskill*CLI> radio tune txvoice 500<br>> Device usb27674 currently not active<br>> <br>> The start of my rpt.conf file:<br>> <br>> [27674] ; Change this to your assigned<br>> node number<br>> <br>> rxchannel=SimpleUSB/usb27674<br>> duplex=2<br>> erxgain=-3<br>> etxgain=3<br>> ;controlstates=controlstates<br>> [...]<br>> <br>> My usbradio.conf:<br>> <br>> ;<br>> ; Usbradio channel driver Configuration File<br>> ;<br>> <br>> [general]<br>> <br>> [usb27674]<br>> <br>> hdwtype=0<br>> rxboost=1<br>> txboost=1<br>> rxctcssrelax=1<br>> txctcssdefault=100.0<br>> rxctcssfreqs=100.0<br>> txctcssfreqs=100.0<br>> ;rxctcssoverride=0<br>> carrierfrom=usbinvert<br>> ctcssfrom=no<br>> rxdemod=speaker<br>> txprelim=no<br>> txlimonly=no<br>> txtoctype=notone<br>> txmixa=voice<br>> txmixb=no<br>> invertptt=0<br>> duplex=1<br>> rxondelay=0<br>> rxnoisefiltype=0<br>> eeprom=0<br>> #includeifexists custom/usbradio.conf<br>> <br>> My simpleusb.conf:<br>> <br>> <br>> ;<br>> ; SimpleUSB configuration<br>> ;<br>> [general]<br>> <br>> [usb27674]<br>> <br>> eeprom=0<br>> <br>> hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using<br>> ; the instructions from usbfob.pdf. Use a setting of<br>> ; 1 is for Dingotel/Sph interfaces.<br>> <br>> rxboost=1 ; 0 = 20db attenuator inserted, 1= 20db attenuator remov<br>> ed<br>> ; Set to 1 for additonal gain if using a low-level receiv<br>> er output<br>> <br>> carrierfrom=usbinvert ; no,usb,usbinvert<br>> ; no - no carrier detection at all<br>> ; usb - from the COR line on the modified USB sound fob<br>> ; usbinvert - from the inverted COR line on the modified<br>> USB sound fob<br>> <br>> ctcssfrom=no ; no,usb,usbinvert<br>> ; no - CTCSS decoding, system will be carrier squelch<br>> ; usb - CTCSS decoding using input from USB FOB<br>> ; usbinvert - from the inverted CTCSS line on the modifie<br>> d USB sound fob<br>> <br>> txmixa=voice ; Left channel output: no,voice,tone,composite,auxvoice<br>> ; no - Do not output anything<br>> ; voice - output voice only<br>> <br>> txmixb=no ; Right channel output: no,voice,tone,composite, auxvoic<br>> e<br>> ; See txmixa above.<br>> <br>> invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to transmi<br>> t<br>> ; This is the collector lead of the 2n4401 on the modifie<br>> d<br>> ; usb sound fob.<br>> ; please refer to the howto for the procedure to do this.<br>> duplex=1 ; Full Duplex<br>> <br>> plfilter=yes ; enable PL filter<br>> <br>> deemphasis=no ; enable de-emphasis (input from discriminator)<br>> <br>> Thanks!<br>> <br>> Phil, N6TCT<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br> </body>
</html>