<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
Jim,<br>
I'm using MDC-1200 for macro switching with almost 100% accuracy,
depending on what radio I'm using. I haven't done anything with the
status codes yet, but wonder if your left-hand side pattern isn't
matching.<br>
<br>
Once a macro is executed it doesn't "replay" unless you switch off
of it, then back on. <br>
<br>
Tony<br>
<br>
<br>
On 04/24/2011 12:07 AM, James Nessen wrote:
<blockquote
cite="mid:BANLkTi=r28biCgVbQMTMNgUhz9_+SRZwRg@mail.gmail.com"
type="cite">Anyone using MDC-1200 on their node? I just
programmed up my HT1250 and gave it a radio ID of 8000, then setup
the corresponding mdcmacro entries:<br>
<br>
[mdcmacro]<br>
I8000=*70<br>
S*-2=*70<br>
S*-1=*81<br>
<br>
I key up to test, and it seems to work as expected on the first
run:<br>
<br>
Got MDC-1200 (single-length) packet on node 2142:<br>
op: 01, arg: 00, UnitID: 8000<br>
Got MDC-1200 data I8000 from local system (2142)<br>
MDCMacro for I8000 doing *70 on node 2142<br>
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2815
usbradio_read: rxcarrierdetect = 0, chan Radio/usb<br>
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2894
usbradio_read: o->rxkeyed = 0, chan Radio/usb<br>
chan_usbradio ACRK dev=usb code=(null) TX ON <br>
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2688
usbradio_read: txPttIn = 1, chan Radio/usb<br>
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2705
usbradio_read: txPttOut = 1, chan Radio/usb<br>
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:3011
usbradio_read: dev=usb got b.txCtcssReady 0.0<br>
-- <Zap/pseudo-1716568020> Playing 'rpt/node' (language
'en')<br>
-- <Zap/pseudo-1716568020> Playing 'digits/2' (language
'en')<br>
-- <Zap/pseudo-1716568020> Playing 'digits/1' (language
'en')<br>
-- <Zap/pseudo-1716568020> Playing 'digits/4' (language
'en')<br>
-- <Zap/pseudo-1716568020> Playing 'digits/2' (language
'en')<br>
-- <Zap/pseudo-1716568020> Playing 'rpt/repeat_only'
(language 'en')<br>
-- Hungup 'Zap/pseudo-1716568020'<br>
chan_usbradio ACRUK dev=usb TX OFF >> <br>
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2694
usbradio_read: txPttIn = 0, chan Radio/usb<br>
-- Hungup 'Zap/pseudo-171990874'<br>
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2705
usbradio_read: txPttOut = 0, chan Radio/usb<br>
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:3011
usbradio_read: dev=usb got b.txCtcssReady <br>
<br>
I then key up again and it seems to decode the packet, but doesn't
touch the macro again:<br>
<br>
[Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2815
usbradio_read: rxcarrierdetect = 1, chan Radio/usb<br>
[Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2886
usbradio_read: o->rxkeyed = 1, chan Radio/usb<br>
Got MDC-1200 (single-length) packet on node 2142:<br>
op: 01, arg: 00, UnitID: 8000<br>
Got MDC-1200 data I8000 from local system (2142)<br>
[Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2815
usbradio_read: rxcarrierdetect = 0, chan Radio/usb<br>
[Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2894
usbradio_read: o->rxkeyed = 0, chan Radio/usb<br>
intrepid*CLI> <br>
<br>
I am also attempting to work on the MDC-1200 status stuff and set
the entries above, the node sees the traffic, but doesn't actually
do anything with it. What am i missing?<br>
<br>
Thanks!<br>
<br>
Jim, K6JWN<br>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre>
</blockquote>
</body>
</html>