<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Monty,</DIV>
<DIV> </DIV>
<DIV>Thank you. The conf file you sent me was a big help. I wished mine conf
files was commented like the one you had. That explains a lot. I made the
changes you said to make in the rpt.conf. It helped increase my audio and it
sounds much better for some reason now. I am still having issues with the link
UHF repeater though. </DIV>
<DIV>Here is my setup:</DIV>
<DIV>RC210 Port 1 UHF Repeater, Port 2 URI (allstar) </DIV>
<DIV> </DIV>
<DIV>URI to RC210 Port2</DIV>
<DIV>Pin 1 (PTT) to Pin 7 (RX COS)</DIV>
<DIV>Pin 8 (COR DET) to Pin 3 (TX PTT)</DIV>
<DIV>Pin 13 (GND) to Pin 9 (GND)</DIV>
<DIV>Pin 21 (MIC IN AC) to Pin 4 (TX AUDIO)</DIV>
<DIV>Pin 22 (LEFT OUT AC) to Pin 5 (AUDIO INPUT)</DIV>
<DIV> </DIV>
<DIV>RC210 Port 1 and Port 2 Linked </DIV>
<DIV>Port 2 setup- Hang Timer=0; Transmitter Enabled; Receiver Enabled; Repeater
Mode; DTMF Enabled; Monitor Mix; Access Mode= Carrier</DIV>
<DIV> </DIV>
<DIV>I can Link my Allstar node to an active Allstar Mode and I have great audio
repeater on the UHF Repeater. But when I key up to transmit on my UHF repeater I
am getting PTT Lights on Port 2 on the controller but I am not getting a keyup
or audio on the Allstar node either locally (via iaXrpt) or through
Webtransciever. Also I can’t connect or send any commands via the UHF port to
Allstar. </DIV>
<DIV> </DIV>
<DIV>Any ideas? I was told that I shouldn’t program port 2 on the RC210 as
Repeater mode? </DIV>
<DIV> </DIV>
<DIV>Thanks for all your time and help.</DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV style="FONT: 10pt tahoma">
<DIV> </DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=monty@ke7jvx.com
href="mailto:monty@ke7jvx.com">Monty</A> </DIV>
<DIV><B>Sent:</B> Friday, May 27, 2011 2:12 PM</DIV>
<DIV><B>To:</B> <A title=kc5dgc@centurytel.net
href="mailto:kc5dgc@centurytel.net">Charles Rader</A> </DIV>
<DIV><B>Subject:</B> Re: [App_rpt-users] Allstar Node and RC210
Issues</DIV></DIV></DIV>
<DIV> </DIV></DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">Hi
Charles,<BR>I have interfaced Allstar to my RC-210. I had a couple of
problems. One was my wiring, everything is backwards. PTT on the
arcom goes to COR on URI, Audio out to audio in, etc. So i would check
that.. Also if you haven't done any config on your allstar node, that
might be it too. I attached my usbradio.conf file, the one I used for
interfacing the Arcom. I put Allstar in COR only mode, might want to do
the same for your Arcom port. Also I had to add these two statements to my
rpt.conf:<BR><BR>duplex=0
<BR>linktolink=yes<BR><BR>I just added them under the etxgain=3<BR><BR>Let me
know if you have any other problems or questions.<BR><BR>Monty<BR><BR><BR>
<DIV class=gmail_quote>On Fri, May 27, 2011 at 9:41 AM, Charles Rader <SPAN
dir=ltr><<A
href="mailto:kc5dgc@centurytel.net">kc5dgc@centurytel.net</A>></SPAN>
wrote:<BR>
<BLOCKQUOTE
style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex"
class=gmail_quote>
<DIV dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>I am having issues with my new Allstar node. I think it’s a configuration
issue with my asterisk. I am using the ACID distro. Is there a place that
explains the conf files and settings? I have yet to run across one on my
searches.</DIV>
<DIV> </DIV>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">Thank
you,<BR>Charles
(kc5dgc)</DIV></DIV></DIV></DIV><BR>_______________________________________________<BR>App_rpt-users
mailing list<BR><A
href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</A><BR><A
href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users"
target=_blank>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</A><BR><BR></BLOCKQUOTE></DIV>
<DIV> </DIV>
<DIV style="VISIBILITY: hidden; LEFT: -5000px" id=avg_ls_inline_popup></DIV>
<STYLE type=text/css>#avg_ls_inline_popup{position: absolute;z-index: 9999;padding: 0px 0px;margin-left: 0px;margin-top: 0px;overflow: hidden;word-wrap: break-word;color: black;font-size: 10px;text-align: left;line-height: 130%;}</STYLE>
</DIV></DIV></DIV></BODY></HTML>