<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
Friends don't let friends use VOX. Just DONT. Its just bad, wrong, and<br>unacceptable. I left it in the distro as a courtesy but I really never intended<br>anyone to attempt to use it. Please, just dont.<br><br>JIM WB6NIL<br><br><br>> Date: Wed, 1 Jun 2011 19:27:27 -0400<br>> From: bdboyle@bdboyle.com<br>> To: app_rpt-users@ohnosec.org<br>> Subject: [App_rpt-users] Pingponging of a simplex node<br>> <br>> I have a very simple simplex node...speaker out, mic in that's configured:<br>> <br>> > hdwtype=0<br>> > rxboost=1<br>> > txboost=0<br>> > rxctcssrelax=1<br>> > carrierfrom=vox<br>> > ctcssfrom=no<br>> > rxdemod=speaker<br>> > txprelim=no<br>> > txlimonly=no<br>> > txtoctype=no<br>> > txmixa=voice<br>> > txmixb=no<br>> > invertptt=0<br>> > duplex=0<br>> > rxondelay=25<br>> > rxnoisefiltype=0<br>> > eeprom=1<br>> <br>> and the rpt.conf is configured with duplex=0....because, when I change<br>> it to a duplex=1, it sits there and bounces back and forth, keying up,<br>> dropping, then courtesy tones key it up, which causes it to key up<br>> again...ad nauseam.<br>> <br>> The stanza for the node in rpt.conf is:<br>> <br>> > rxchannel=Radio/usbxxxxx<br>> > duplex=0<br>> > erxgain=-3<br>> > etxgain=3<br>> > scheduler=schedulexxxxx<br>> > morse=morsexxxx<br>> > macro=macroxxxx<br>> > functions=functionsxxxx<br>> > phone_functions=functionsxxxx<br>> > link_functions=functionsxxxx<br>> > telemetry=telemetry<br>> > wait_times=wait-times<br>> > context = radio<br>> > callerid = "WB0YLE Simplex" <xxxx><br>> > idrecording=/var/lib/asterisk/sounds/wb0ylesimplex<br>> > accountcode=RADIO<br>> > hangtime=1000<br>> > althangtime=1000<br>> > totime=170000<br>> > idtime=540000<br>> > politeid=3000<br>> > idtalkover=|iWB0YLE<br>> > unlinkedct=ct2<br>> > remotect=ct3<br>> > linkunkeyct=ct8<br>> > unlinkedct=ct2<br>> > nolocallinkct=0<br>> > nounkeyct=0<br>> > beaconing=0<br>> <br>> <br>> it worked for a while with duplex=1...I rang out the cables, no shorts,<br>> etc.<br>> <br>> Hmmm...it works, after a fashion, with the duplex set to 0 in rpt.conf,<br>> but, no courtesy tones (I realize that you really don't need them for<br>> simplex, but, it's a nice to have...)<br>> <br>> Anyway, suggestions? Did I miss something (that's common...)?<br>> <br>> Thx all<br>> <br>> 73 Bryan WB0YLE<br>> Allstar 27294 27295 27710<br>> Echolink WB0YLE-R<br>> Morrisville PA<br>> <br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br> </body>
</html>