<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
duplex=1 is quite nice, actually.<br><br>What you really need to do is set carrierfrom=usbinvert<br>since your signal is *low* true.<br><br>JIM WB6NIL<br><br><div>> Date: Mon, 4 Jul 2011 08:15:44 -0400<br>> From: jrorke@cogeco.ca<br>> To: app_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] My first post and a real newbie question<br>> <br>> Hi Michel, Ok set duplex = 0 in the Rpt.conf<br>> And set your hangtime = 1 (change it from 1000).<br>> <br>> That should get you simplex node working.<br>> <br>> Also there will be no telemetry but you will hear connect /disconnect <br>> messages.<br>> <br>> If there is no statement in Rpt.conf for duplex, it operates in full <br>> duplex by default.<br>> <br>> Hope this helps.<br>> <br>> Jon VA3RQ<br>> <br>> On 7/4/2011 6:16 AM, Michael Carey wrote:<br>> > Hi Everybody,<br>> ><br>> > I'm busy finalising my AllStarLink node 27871 . It's going to be a <br>> > simplex (for now) node with the future potential to be linked to my <br>> > local 70cm repeater.<br>> ><br>> > I am finding one little problem that I can't seem to solve. I have set <br>> > duplex in usbradio.conf to zero (0) and duplex in rpt.conf to one (1), <br>> > but as soon as my node radio receives a transmission, it keys up <br>> > straight away... over the incoming transmission, almost as if it is <br>> > still configured for duplex mode. This makes it real hard to enter any <br>> > DTMF codes. (-: Where should be I looking to solve this?<br>> ><br>> > I am handling CTCSS (both TX and RX) in the node radio itself (I am <br>> > using a Simoco SRM9000 VHF commercial radio). I have a low going logic <br>> > level that has been tied to the radios "valid signal" flag which is <br>> > set to CTCSS 107.2Hz, this is fed to the COS input on my URI. The <br>> > audio output from the radio is squelched, highpass filtered and <br>> > de-emphasised.<br>> ><br>> > I have set carrierfrom=usb and ctcssfrom=no, I think this then <br>> > disables CTCSS decoding within the computer. Does this also disable <br>> > transmitting CTCSS? I have set txmixa=voice which I presume also stops <br>> > CTCSS from being output from the URI.<br>> ><br>> > I look forward to hearing from you all... via the email list and on <br>> > air too!<br>> ><br>> > Michael<br>> > VK5ZEA<br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>