<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#ffffff">
Thanks to all with your replies,<br>
<br>
It was the carrierfrom-usbinvert that I needed to correct, I thought
I did try this before but it may have coincided with times I wasn't
restarting/reloading Asterisk properly.<br>
Now I have to tweak my audio levels when I bring home my radio test
set from work. I am being a nice employee and have offered the boss
the use of my personal gear while his IFR 500A is away getting
fixed!<br>
<br>
I do like the telemetry tones but I have also reduced my hangtime a
little, something very calming about those beeps! It might just be
that it's all new right now and in time I will be less fond of them.
(-:<br>
<br>
Michael.<br>
VK5ZEA<br>
<br>
<br>
<br>
<br>
On 4/07/2011 21:48, Jim Duuuude wrote:
<blockquote cite="mid:BLU155-w55EB39D1EB80BE5FCC1869B15C0@phx.gbl"
type="cite">
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
<div dir="ltr">
duplex=1 is quite nice, actually.<br>
<br>
What you really need to do is set carrierfrom=usbinvert<br>
since your signal is *low* true.<br>
<br>
JIM WB6NIL<br>
<br>
<div>> Date: Mon, 4 Jul 2011 08:15:44 -0400<br>
> From: <a class="moz-txt-link-abbreviated" href="mailto:jrorke@cogeco.ca">jrorke@cogeco.ca</a><br>
> To: <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
> Subject: Re: [App_rpt-users] My first post and a real
newbie question<br>
> <br>
> Hi Michel, Ok set duplex = 0 in the Rpt.conf<br>
> And set your hangtime = 1 (change it from 1000).<br>
> <br>
> That should get you simplex node working.<br>
> <br>
> Also there will be no telemetry but you will hear connect
/disconnect <br>
> messages.<br>
> <br>
> If there is no statement in Rpt.conf for duplex, it
operates in full <br>
> duplex by default.<br>
> <br>
> Hope this helps.<br>
> <br>
> Jon VA3RQ<br>
> <br>
> On 7/4/2011 6:16 AM, Michael Carey wrote:<br>
> > Hi Everybody,<br>
> ><br>
> > I'm busy finalising my AllStarLink node 27871 . It's
going to be a <br>
> > simplex (for now) node with the future potential to
be linked to my <br>
> > local 70cm repeater.<br>
> ><br>
> > I am finding one little problem that I can't seem to
solve. I have set <br>
> > duplex in usbradio.conf to zero (0) and duplex in
rpt.conf to one (1), <br>
> > but as soon as my node radio receives a
transmission, it keys up <br>
> > straight away... over the incoming transmission,
almost as if it is <br>
> > still configured for duplex mode. This makes it real
hard to enter any <br>
> > DTMF codes. (-: Where should be I looking to solve
this?<br>
> ><br>
> > I am handling CTCSS (both TX and RX) in the node
radio itself (I am <br>
> > using a Simoco SRM9000 VHF commercial radio). I have
a low going logic <br>
> > level that has been tied to the radios "valid
signal" flag which is <br>
> > set to CTCSS 107.2Hz, this is fed to the COS input
on my URI. The <br>
> > audio output from the radio is squelched, highpass
filtered and <br>
> > de-emphasised.<br>
> ><br>
> > I have set carrierfrom=usb and ctcssfrom=no, I think
this then <br>
> > disables CTCSS decoding within the computer. Does
this also disable <br>
> > transmitting CTCSS? I have set txmixa=voice which I
presume also stops <br>
> > CTCSS from being output from the URI.<br>
> ><br>
> > I look forward to hearing from you all... via the
email list and on <br>
> > air too!<br>
> ><br>
> > Michael<br>
> > VK5ZEA<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > App_rpt-users mailing list<br>
> > <a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> >
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
> ><br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
</div>
</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre>
</blockquote>
<br>
</body>
</html>