<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
you are correct. IAXRPT allows you to select what node you are "sending DTMF digits"<br>to in the node number (account) window (the same one you use to select which node <br>to connect to).<br><br>JIM WB6NIL<br><br><div>> From: dpowellwilliams@shaw.ca<br>> To: app_rpt-users@ohnosec.org<br>> Date: Sun, 7 Aug 2011 12:38:01 -0700<br>> Subject: [App_rpt-users] Remote Command Mode with Iaxrpt<br>> <br>> I have noticed that I cannot use Iaxrpt to send remote commands to a linked<br>> node using the *4 <node_number> syntax.<br>> <br>> Remote commands entered via DTMF or the console (rpt fun <nodename><br>> <command>) work fine. <br>> <br>> Commands to the target node via a direct Iaxrpt connection also work.<br>> <br>> However, if the target node is a remote base, only one connection is<br>> possible, so remote commands are necessary to make changes when the remote<br>> base node is connected to a standard node.<br>> <br>> My rpt.conf file does include the necessary settings for link_functions.<br>> <br>> I have asked Steve H about this but he is too busy to look at it for the<br>> moment.<br>> <br>> Anybody have any experience with using Iaxrpt for remote commands?<br>> <br>> 73,<br>> <br>> Dave<br>> VE7MQ.<br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>