<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
chan_beagle follows the so-far consistent device specification<br>methodology (Asterisk CLI command) of <device-type> active <device-name> <br><br>for chan_beagle, and your chan_beagle device named 'beagle1234'<br>it would be:<br><br>beagle active beagle1234<br><br>for chan_simpleusb, and your chan_simpleusb device named 'fred42'<br>it would be:<br><br>susb active fred42<br><br>for chan_usbradio, and your chan_usbradio device name 'usb5678'<br>it would be:<br><br>radio active usb5678<br><br>[since chan_usbradio did this first, I think you can see the reasoning<br>by which the particular syntax was chosen :-) ]<br><br>Also, you can do <device-type> active<br>(with no device specified) to see which is currently "active" (selected).<br><br>JIM WB6NIL<br><br><br><div>> From: njgarbenis@gmail.com<br>> Date: Sun, 21 Aug 2011 14:27:21 -0400<br>> To: app_rpt-users@ohnosec.org<br>> Subject: [App_rpt-users] Beagleboard/Lox<br>> <br>> I have a beagle board setup with the Lox board using both ports. When I use beagle tune to adjust audio it only works with port a. How change this to adjust port/node b<br>> <br>> Neal<br>> <br>> Sent from my iPhone<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>