<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
I have compiled a test version of Limey Linux version 1.1.5 that appears<br>to properly support the new Intel D525MW Atom motherboard.<br><br>This is an 'augmented' version of the i686-suported-1.1.5 release, so<br>it *should* work on all the previously-supported i686 processors, also.<br><br>There were some rather major changes (necessary to support SATA<br>interfaces) in the hard disk driver stuff (even for those MB's that only<br>have IDE), so it would be nice if some people could verify that this still<br>works on non-D525MW motherboards (at least the ones that work in<br>the normal release).<br><br>I have tested this release on both a D525MW and the D945GCLF series<br>motherboards, and it seems to work just fine.<br><br>Also, if you have 5 minutes to wait for it to boot (since the SWINE boot loader does<br>not support anything faster then USB 1.1 speed, YUCH!), you can flash<br>the distro onto a USB pen drive (>= 128 MB), and it will work. Once the<br>OS loads, it runs at full speed, just the initial boot load is PAINFULLY slow.<br><br>If you dare, here is the URL for this version:<br><br><br>http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz<br><br>JIM WB6NIL<br><br><br><br><br> </div></body>
</html>