<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
Thin clients?? What do you think we are, and eating disorder clinic or something ?? :-) :-)<br><br>First of all, Limey only supports VERY specific motherboard, of which that is not one.<br>Also, since it runs entirely out of RAM, you need more then that for it to work in a reasonable<br>manner.<br><br>JIM<br><br><div>> Date: Thu, 6 Oct 2011 09:55:25 -0400<br>> From: Ramesh@va3uv.com<br>> To: app_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough<br>> <br>> Hi Jim!<br>> <br>> I have been testing chan_simpleusb on the HP T5710 platform - running <br>> ACID with a whopping 256MB of RAM. I was going to try the Limey Linux <br>> install to see how this would handle on these thin clients. However, <br>> based on your note below... I am wondering whether Limey is even worth <br>> pursuing....<br>> <br>> <br>> ACID and chan_simpleusb seems to work great... I am almost done with <br>> week 2 of my block test!<br>> <br>> The only snag (and it may just be cosmetic) is that I see the INIT 2.86 <br>> (or whatever) reloading on the screen - but that doesn't see to affect <br>> the performance of the system.<br>> <br>> Cheers!<br>> <br>> Ramesh.<br>> <br>> <br>> On 06/10/2011 9:50 AM, Jim Duuuude wrote:<br>> > Also, this release requires 1GB of RAM (the original 1.1.5 only required<br>> > 512 MB).<br>> > I figured it was time not to be "squosen" into a barely-large-enough<br>> > memory space.<br>> ><br>> > JIM<br>> ><br>> > ------------------------------------------------------------------------<br>> > From: telesistant@hotmail.com<br>> > To: app_rpt-users@ohnosec.org<br>> > Date: Thu, 6 Oct 2011 06:46:45 -0700<br>> > Subject: [App_rpt-users] for those Limey Linux and or D525MW users who<br>> > are brave enough<br>> ><br>> > I have compiled a test version of Limey Linux version 1.1.5 that appears<br>> > to properly support the new Intel D525MW Atom motherboard.<br>> ><br>> > This is an 'augmented' version of the i686-suported-1.1.5 release, so<br>> > it *should* work on all the previously-supported i686 processors, also.<br>> ><br>> > There were some rather major changes (necessary to support SATA<br>> > interfaces) in the hard disk driver stuff (even for those MB's that only<br>> > have IDE), so it would be nice if some people could verify that this still<br>> > works on non-D525MW motherboards (at least the ones that work in<br>> > the normal release).<br>> ><br>> > I have tested this release on both a D525MW and the D945GCLF series<br>> > motherboards, and it seems to work just fine.<br>> ><br>> > Also, if you have 5 minutes to wait for it to boot (since the SWINE boot<br>> > loader does<br>> > not support anything faster then USB 1.1 speed, YUCH!), you can flash<br>> > the distro onto a USB pen drive (>= 128 MB), and it will work. Once the<br>> > OS loads, it runs at full speed, just the initial boot load is PAINFULLY<br>> > slow.<br>> ><br>> > If you dare, here is the URL for this version:<br>> ><br>> ><br>> > http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz<br>> ><br>> > JIM WB6NIL<br>> ><br>> ><br>> ><br>> ><br>> ><br>> > _______________________________________________ App_rpt-users mailing<br>> > list App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> ><br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>