<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
With the node-generated test tone, you are supposed to set<br>the levels to produce 3KHz deviation (not including CTCSS).<br><br>JIM<br><br><br><div>> Date: Mon, 5 Dec 2011 13:10:51 -0500<br>> From: bdboyle@bdboyle.com<br>> To: app_rpt-users@ohnosec.org<br>> Subject: [App_rpt-users] another question: receive level from connected nodes<br>> <br>> Been digging through the archives...and haven't found an answer to this, <br>> so I thought I'd throw it out to discussion...<br>> <br>> I have 4 nodes connected up to a local hub. All the levels are set <br>> properly (own an oldish service monitor, so...can see the modulation <br>> levels of the ctcss and voice nicely. Local wideband nodes are set for <br>> 3.2K w/650 hz ctcss (except for the narrowband 900, which totals out <br>> around 2.7k.<br>> <br>> Now...when the audio comes in from the net I'm connected to, <br>> however...the modulation is a lot louder; peaking up to 5K. (my node is <br>> connected to another hub node, so, in essence, we have 2 back to back <br>> hubs, one taking care of central NJ, mine dealing with eastern PA.)<br>> <br>> Just wondering...how to set the level so the inbound audio from the <br>> networked nodes is a little less...um...'sprightly'.<br>> <br>> Would this be handled in my usbradio_tune_usbhubnode.conf thru <br>> radio-tune-menu or...somewhere else?<br>> <br>> <br>> -- <br>> Bryan<br>> In this world, you must be oh so smart or oh so pleasant.<br>> Well, for years I was smart. I recommend pleasant.<br>> You may quote me.<br>> <br>> Sent from my MacBook Pro.<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>