<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19154">
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=2 face=Arial>Ron, you're describing two different things
here...or I'm not decoding your words. Does node 28174 that you have work ok,
connect to outside world, make contacts that work? If you don't know that the
node is working right I'd hold off troubleshooting iaxrpt till I knew that teh
node itself was ok. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>If your node is ok then distribution, URI wiring,
ptt connections, etc really are not a matter. iaxrpt should connect.
</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Try, from command line:</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>rpt showvars 28174</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Mine, no received signal:</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>radio*CLI> rpt showvars 2360<BR>Variable listing
for node 2360:<BR> <STRONG>RPT_TXKEYED=0<BR></STRONG>
RPT_NUMLINKS=3<BR>
RPT_LINKS=3,T27849,T27891,T3341697<BR>
RPT_NUMALINKS=2<BR> RPT_ALINKS=2,27849TU,3341697TU<BR>
RPT_ETXKEYED=0<BR> <STRONG>RPT_RXKEYED=0<BR></STRONG>
RPT_AUTOPATCHUP=0<BR> -- 8 variables</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Here's witht he repeater keyed, signal on
input:</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>radio*CLI> rpt showvars 2360<BR>Variable listing
for node 2360:<BR> RPT_ETXKEYED=1<BR><STRONG>
RPT_TXKEYED=1<BR> RPT_RXKEYED=1<BR></STRONG>
RPT_NUMLINKS=3<BR>
RPT_LINKS=3,T27849,T27891,T3341697<BR>
RPT_NUMALINKS=2<BR> RPT_ALINKS=2,27849TU,3341697TU<BR>
RPT_AUTOPATCHUP=0<BR> -- 8 variables</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT><FONT size=2 face=Arial>See the two
highlighted? </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I'd be curious if your receiver is in an
unsquelched mode and timed out...</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Also rpt stats 28174</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>SEe if you're timed out..??</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I connected to your node about 10:50PM central, and
it kept sending unkeys at about 5 second intervals. So something's not
configured right in general there, and I'd check all that stuff before
attempting iaxrpt. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I have no idea about the pins on the URI, I
modified my own USB fob, and/or use the paralell port for signalling. However, I
think you are speaking of the radio audio oiut when you speak of 9600 baud data
out. Are you certain that there is no filtering at all at that point?
</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Another command is radoi tune
rxsquelch</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>The numbers should be well between 0 and 999, and
the squelch setting should be about 100-125 higher than signal strength. If your
signal strength is showing very thigh...999 I'd say the audio calibrations
were in error or your audio output is filtered in some way. It really needs to
be discriminator out. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>What do you have duplex set to in rpt.conf?
</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>GeorgeC</FONT></DIV>
<DIV><FONT size=2 face=Arial>W2DB</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>----- Original Message ----- </FONT>
<DIV><FONT size=2 face=Arial>From: "Ron Morell" <</FONT><A
href="mailto:ron@morell.us"><FONT size=2
face=Arial>ron@morell.us</FONT></A><FONT size=2 face=Arial>></FONT></DIV>
<DIV><FONT size=2 face=Arial>To: <</FONT><A
href="mailto:app_rpt-users@ohnosec.org"><FONT size=2
face=Arial>app_rpt-users@ohnosec.org</FONT></A><FONT size=2
face=Arial>></FONT></DIV>
<DIV><FONT size=2 face=Arial>Sent: Saturday, December 10, 2011 5:20
PM</FONT></DIV>
<DIV><FONT size=2 face=Arial>Subject: [App_rpt-users] iaxRPT does not
receive</FONT></DIV></DIV>
<DIV><FONT face=Arial><BR><FONT size=2></FONT></FONT></DIV><FONT size=2
face=Arial>>I need help. I have iaxRPT installed on a Windows XP
netbook. I have<BR>> Asterisk+app_rpt using the AllStar Link node
number 28174. The setup is<BR>> the ACID CENTOS install and it is using
a GMK URI. The wiring from the<BR>> URI to Radio is:<BR>> radio
ground to URI pin 13<BR>> radio PTT to URI pin 1<BR>> radio receive to URI
pin 21 ;This is the 9600 baud data audio output<BR>> radio microphone
to URI pin 22<BR>> radio squelch is not connected<BR>> <BR>> I keep
checking my wiring on the pins, but don't find fault with the<BR>> wiring...
I always doubt my wiring. Hi Hi<BR>> <BR>>>From iaxRPT it will send out
audio and tones to the radio transmitter<BR>> just fine. When the radio
receiver is sending voice and tones back to<BR>> the iaxRPT application
nothing happens nothing is heard. The handheld<BR>> used to talk to the
remote radio is using ctcss 100Hz tones. The remote<BR>> radio is a
Yaesu FT-7800R using "enc dec" ctcss tone 100Hz.<BR>> <BR>> This is the
setup in iax.conf<BR>> ; IAXRPT Access<BR>> <BR>> [gui]<BR>>
type=user<BR>> context=radio-gui<BR>> auth=md5<BR>>
secret=password<BR>> host=dynamic<BR>> disallow=all<BR>>
allow=ulaw<BR>> allow=gsm<BR>> transfer=no<BR>> <BR>> This is the
setup in extensions.conf<BR>> ; Context for IAXRPT Access<BR>> <BR>>
[radio-gui]<BR>> exten => 28174,1,rpt(28174|X)<BR>> ; The X option
passed to the Rpt application disables normal security<BR>> checks.<BR>> ;
see </FONT><A href="http://ohnosec.org/drupal/node/58"><FONT size=2
face=Arial>http://ohnosec.org/drupal/node/58</FONT></A><BR><FONT size=2
face=Arial>> <BR>> This is the setup in usbradio.conf<BR>>
[general]<BR>> <BR>> [usb]<BR>>
hdwtype=0 <BR>>
rxboost=1
<BR>> rxctcssrelax=1 <BR>>
txctcssdefault=100.0 <BR>>
rxctcssfreqs=100.0 <BR>>
txctcssfreqs=100.0 <BR>>
;rxctcssoverride=0 ;<BR>>
carrierfrom=dsp <BR>> ctcssfrom=dsp
<BR>> rxdemod=flat <BR>>
txprelim=no <BR>>
txlimonly=yes <BR>>
txtoctype=notone <BR>>
txmixa=composite <BR>>
txmixb=no <BR>>
invertptt=0 <BR>>
duplex=0
<BR>> rxondelay=20
<BR>> <BR>> I have port 4569UDP forwarded to the Asterisk+app_rpt computer
and that<BR>> seems to work out fine:<BR>> test*CLI> iax2 show
registry<BR>>
Host
dnsmgr Username
Perceived
Refresh <BR>> State<BR>> 67.215.233.178:4569
N 28174
174.27.6.80:4569 60
<BR>> Registered<BR>> test*CLI><BR>> <BR>> The Windows XP
computer with iaxRPT has an exception in the firewall for<BR>> iaxRPT.exe and
I have explicitly opened port 4569UDP and have even tried<BR>> it with the
firewall off. The iaxRPT setup is expecting to use port<BR>>
4569UDP.<BR>> <BR>> So what magic words are out of order? I'm not
seeing the problem.<BR>> Ron Morell<BR>> KA7U<BR>></FONT></BODY></HTML>