<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/4.2.3">
</HEAD>
<BODY>
While I'm not using an 706, but a Syntor X with an XCAT here's the related stuff in my rpt.conf<BR>
<I>(gleaned mostly from an archived Tom Sawyer post that I found in a Google search)</I><BR>
<BR>
Yes, the CIV address is in decimal.<BR>
<BR>
When I used to mess with my 706mkIIg with Ham Radio Deluxe, the serial/CIV level converter <BR>
I used needed to have one of the handshake leads forced on to power the interface. I want to say DTR, but not sure.<BR>
If that's the case I also remember seeing a way to set a ttyS to do that. But again, memory fails me as to the command<I> (setserial ?)</I>.<BR>
<BR>
--------------------------------------------------------------------------------------------------------<BR>
functions = functions-remote<BR>
link_functions = functions-remote<BR>
<I>memory = memory ; Section to hold memory entries (optional)</I><BR>
<I>remote = xcat ; Radio Command format</I><BR>
<I> ; remote=ft897 for Yaesu FT-897 or</I><BR>
<I> ; remote=rbi for Doug Hall RBI1</I><BR>
<I> ; remote=kenwood for Kenwood mobiles such as the TMG707A</I><BR>
<I> ; remote=ic706 for the Icom IC-706 </I><BR>
<I> ; remote=xcat for Syntor X with XCAT board</I><BR>
<I>civaddr = 32 ; CI-V address in DECIMAL</I><BR>
<I>ioport = /dev/ttyS0 ; Specify port for serial port (optional)</I><BR>
<I>iospeed = 19200 ; COMM port speed</I><BR>
<I>dusbabek = yes ; Not sure what this is but it needs to be there</I><BR>
<I>uthlevel = 0 ; Remote base authentication level</I><BR>
<I> ; authlevel = 0 : Anyone can use it</I><BR>
<I> ; authlevel = 1 : Requires log in, Waits for Tx key to ask for it</I><BR>
<I> ; authlevel = 2 : Requires log in, asks for it automously</I><BR>
<I>;mars = 1 ; set=1 for IC-706 w/MARS mods (optional)</I><BR>
<I>;</I><BR>
<I>remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable).</I><BR>
<I>remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable)</I><BR>
<I>split2m = 600 ; Set the default tx split to 600 KC</I><BR>
<BR>
<BR>
<I>[memory]</I><BR>
<I>;Syntax : CC=RRR.RRR,PPP.P,AAAAA</I><BR>
<I>; C=Channel Number</I><BR>
<I>; R=RX Frequency</I><BR>
<I>; P=PL Frequency</I><BR>
<I>; A=Attributes</I><BR>
<I>;</I><BR>
<I>;Attributes : a=AM b=LSB f=FM u=USB</I><BR>
<I>; l=Low Power m=Medium Power h=High Power</I><BR>
<I>; -=Minus TX Offset s=Simplex +=Plus TX Offset</I><BR>
<I>; t=TX PL on r=RX PL on</I><BR>
<I>;</I><BR>
<I>init=147.540,123.0,shrt ;Set to this on startup</I><BR>
<I>00=145.510,123.0,sh</I><BR>
<I>01=145.530,123.0,sh</I><BR>
<BR>
--------------------------------------------------------------------------------------------------------<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
<I>Robert A. Poff</I><BR>
<I>Loganville, PA</I><BR>
<BR>
WB3AWJ<I> - Allstar 27784</I><BR>
<I>Powered by Linux</I> <BR>
<BR>
</TD>
</TR>
</TABLE>
<BR>
</BODY>
</HTML>