<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 14.02.5004.000">
<TITLE>D700A interface with a URI</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">I wanted to play with a URI to do all the ctcss generation, and obviously audio generation. SO I selected 9600 baud on the radio, made the configuration changes so that I was putting audio into the m</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri">odulator instead of the microphone. </FONT></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">I set txboost on, the txaudio to composite, and txprelim on. Then I started testing using the radio adjustment tool. But I could never get the audio to go loud enough to make 3khz dev.</FONT></SPAN><SPAN LANG="en-us"></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">What am I doing wrong?</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> I'd prefer not having to use the 12v input and the 6db amp, I would think that I should be able to drive the tnc interface pin</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> and the modulator input when in 9600 baud mode with pleanty from the URI, but I can't seem too…</FONT></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">Anyone else hooked one up and made it work?</FONT></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">Alan</FONT></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">btw, txboost 0 or 1 made no difference </FONT></SPAN></P>
<P DIR=LTR><SPAN LANG="en-us"></SPAN></P>
</BODY>
</HTML>