Greetings,<br><br>I have a strange problem. I am going to discuss the problem then I am going to tell what I have done to fix it.<br><br>Right now I am running 2 USB CM108 Fobs. Fob 1 (repeater) is on my 27539 repeater. Fob 2 (weather radio) is on 27540. Also I am running IAXRPT on 27541. Now here is the problem. When fob 2 is rxing. I can here that rx on all the tx lines going out. So the output to the repeater radio can hear fob two. 27541 can also hear fob two receiver. <br>
<br>There is what I have done to try and fix this. I have moved fob1 to another usb port. Same result. Also moved the fob2 to another set of usb ports on the motherboard. But I did notice something. If the usb fob is not linked in asterisk is not heard anywhere. But once I have simpleusb-tune-menu place the usb fob on a port, I can hear it everywhere.<br>
<br>Any ideas? I would really like to run 3 fobs. But if I can not get 2 fobs to work I am stuck.<br><br>Ryan<br>KB8PMY<br>