Thanks Jim,<br><br>I studied things a bit more, and found that the D2700MUD supports something called eUSB.<br>An embedded USB flash drive which fits over a specific USB header on the MoBo, and has a locking screw.<br>Found some 1GB eUSB boards on eBay and will give that a go as the system drive.<br>
<br>D2700MUD has 7 USB ports.<br>4 external ports on the back panel<br>3 internal ports via headers on the MoBo.<br><br>I'm building two systems with 12V power supplies.<br>Will report on how things go / photos etc.<div>
<br></div><div>-R<br><br><div class="gmail_quote">On Sat, Oct 20, 2012 at 1:44 PM, Jim Duuuude <span dir="ltr"><<a href="mailto:telesistant@hotmail.com" target="_blank">telesistant@hotmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div dir="ltr">
I have no idea whether the PCIe SSD would work.. You can always try it :-)<br><br>If you are intending to use that many URI's you should probably consider using chan_simpleusb<br>as to not overtask your system. I hope it has that many on-board USB slots.<br>
<br>Jim WB6NIL<br><br><div><div></div><hr>Date: Sat, 20 Oct 2012 13:21:17 -0500<br>From: <a href="mailto:randy@neals.ca" target="_blank">randy@neals.ca</a><br>To: <a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] Limey on Intel D2700MUD Questions<div><div class="h5"><br><br>Hi,<br><br>I've read the Limey docs, saw the D2700MUD was supported and got one.<br>Now building the system, but not with a lot of Linux exp.<br>
<br>Drive Question:<br>I could use a 128MB CF card in a CF/SATA adapter, or <br>
I see the D2700MUD board has a Mini PCIe port where I could put an SSD.<br>The SSD would be a clean cable, all-components-on-the-motherboard system and looks attractive.<br>If I used an SSD, would I still be able to use the standard Limey binary/image intended for the CF?<br>
<br>RTCM vs URIx and system scalability/performance:<br>I'm aiming to use this system to control a co-located VHF and UHF repeater. (ICOM FR-5000/6000)<br>It may also have an additional repeater or link added over time - possibly 4 radios.<br>
Do I need to be concerned about performance of this D2700 system with 4 radios?<br>Is there a performance advantage in using the RTCM as the radio interface in that it seems to process COR in the RTCM rather than n the PC?<br>
<br>Any hints or tips would be appreciated.<br><br>Thanks,<div>Randy</div>
<br></div></div>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></div> </div></div>
</blockquote></div><br></div>