<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
It works FINE!!<br><br>You have to send digits to the node that has the propagate_dtmf, and it will output them.<br><br>For example, if the node that has that set up is 1234, then you need, once you link to it<br>from a different node, do a *41234 (into command mode for node 1234), then whatever<br>digits you send to it will go out the main interface for node 1234.<br><br>Jim WB6NIL<br><br><div><div id="SkyDrivePlaceholder"></div><hr id="stopSpelling">Date: Mon, 29 Oct 2012 22:16:34 -0400<br>From: kb2faf@arrl.net<br>To: app_rpt-users@ohnosec.org<br>Subject: Re: [App_rpt-users] Fwd: Dtmf pass through<br><br>
  
    
  
  
    FYI,<br>
    <br>
    I have the same problem and have tried everything indicated below
    with no luck.  It can't be this complicated can it?<br>
    <br>
    Chris <br>
    KB2FAF<br>
    <br>
    <br>
    <br>
    <br>
    <div class="ecxmoz-cite-prefix">On 10/29/2012 04:19 PM, Ian Venable
      wrote:<br>
    </div>
    <blockquote cite="mid:CAKo3QwsKxFJ7QZM2Y9XBhRwvWZYt5Doj_UCCn7iiPhZBWo545w@mail.gmail.com">
      <div>So I still am having trouble with this. So far I have added</div>
      <div>propagate_dtmf=yes</div>
      <div>linktolink=yes<br>
        inxlat=#56,#57,0123456789ABCD<br>
        outxlat=#56,#57,0123456789ABCD</div>
      <div>to the rpt.conf file on the node that has the cat200b
        controller attached to it. Also on both of my other nodes that
        are connected via the allstar system i have added </div>
      <div>propagate_dtmf=yes</div>
      <div>to there rpt.conf files. I have done a restart on all the
        nodes, and still not getting the dtmf to pass through. When the
        dtmf passes through you should be able to hear it on the output
        of the repeaters, right? As long as it is not started with a (*)
        then the node would try to act on the dtmf. The cat200b
        controller is in remote base weather mode, and does not require
        COR, or PL to act, all it is looking at is the Tx audio from the
        usb fob, which goes into the Rx port on the controller. So all
        the controller needs to hear is the DTMF audio, but its not
        getting there. The controllers Tx audio is connected to the Rx
        audio on the usb fob, and I know thats working because I hear
        the controller identify itself with its version when I power
        cycle it. I am probably doing something wrong, so hopefully
        someone could point me in the right direction. Thanks!</div>
      <div> </div>
      <div>Ian Ki6ies<br>
        <br>
        <br>
      </div>
      <div class="ecxgmail_quote">On Sun, Oct 28, 2012 at 5:42 PM, Ken <span dir="ltr"><<a href="mailto:ke2n@cs.com">ke2n@cs.com</a>></span>
        wrote:<br>
        <blockquote style="padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid" class="ecxgmail_quote">
          <div lang="EN-US">
            <div>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">*4
                  sends “telemetry” (control codes) to the other node …
                  not DTMF</span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">I
                  think you want</span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
              <p class="ecxMsoNormal"><span style="font-family:"Courier\00000d\00000a                  New";font-size:9pt">propagate_dtmf=yes</span></p>
              <p class="ecxMsoNormal"><span style="font-family:"Courier\00000d\00000a                  New";font-size:9pt"> </span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">in
                  the node stanza</span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">Ken</span></p>
              <p class="ecxMsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
              <div style="border-width:medium medium medium\00000d\00000a                1.5pt;border-style:none none none\00000d\00000a                solid;border-color:currentColor currentColor\00000d\00000a                currentColor blue;padding:0in 0in 0in 4pt">
                <div>
                  <div style="border-width:1pt medium\00000d\00000a                    medium;border-style:solid none\00000d\00000a                    none;border-color:rgb(181,196,223) currentColor\00000d\00000a                    currentColor;padding:3pt 0in 0in">
                    <p class="ecxMsoNormal"><b><span style="font-family:"Tahoma","sans-serif";font-size:10pt">From:</span></b><span style="font-family:"Tahoma","sans-serif";font-size:10pt">
                        <a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a>
                        [mailto:<a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a>]
                        <b>On Behalf Of </b><a href="mailto:ki6ies.tasma@gmail.com">ki6ies.tasma@gmail.com</a><br>
                        <b>Sent:</b> Sunday, October 28, 2012 5:31 PM<br>
                        <b>To:</b> <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
                        <b>Subject:</b> [App_rpt-users] Fwd: Dtmf pass
                        through</span></p>
                  </div>
                </div>
                <div>
                  <div class="h5">
                    <p class="ecxMsoNormal"> </p>
                    <p style="margin-bottom:12pt" class="ecxMsoNormal"><br>
                      <br>
                      -------- Original Message --------<br>
                      Subject: Dtmf pass through<br>
                      From: <a href="mailto:ki6ies.tasma@gmail.com">ki6ies.tasma@gmail.com</a><br>
                      To: <a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a><br>
                      CC: </p>
                    <div>
                      <div>
                        <p class="ecxMsoNormal">Hello all! I need some
                          help. I am trying to control a cat200 repeater
                          controller via dtmf. It is its own node. I
                          have my other node (uhf repeater)connected to
                          it, from which i would like to send the
                          commands from. I have tried the *4 and the
                          node number. And then i hear "By your
                          command". But dtmf is not making it to the
                          controller. It is making it to the other node,
                          because I can issue it commands. It is just
                          not passing through the other node, which i
                          would like for it to do. Any thoughts?</p>
                      </div>
                      <div>
                        <p class="ecxMsoNormal"> </p>
                      </div>
                      <div>
                        <p class="ecxMsoNormal">Ian</p>
                      </div>
                      <div>
                        <p class="ecxMsoNormal"> </p>
                      </div>
                      <div>
                        <p class="ecxMsoNormal"><i><span style="color:rgb(51,51,51)">Sent from my
                              Verizon Wireless 4G LTE DROID</span></i></p>
                      </div>
                    </div>
                  </div>
                </div>
              </div>
            </div>
          </div>
        </blockquote>
      </div>
      <br>
      <br>
      <fieldset class="ecxmimeAttachmentHeader"></fieldset>
      <br>
      <pre>_______________________________________________
App_rpt-users mailing list
<a class="ecxmoz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="ecxmoz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre>
    </blockquote>
    <br>
  

<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</div>                                     </div></body>
</html>