Jim just an FYI. I did a fresh install of ACID last night. I then installed allmon. When veiwing the allmon anytime there was a keyup the page did not turn green. I then updated to the latest astsrc and all was good. I would have thought that would have already been part of a new install.<div>
<br></div><div><br></div><div>On a side note I am trying to get a couple of seperate servers to show up on one server page. Currently I have all the boxes open to the web. Same ports on all, login and passwds same on all. IP addresses allmon.ini pointing to the external IP of the external server. Webpage only shows local node. Anyone with suggestions? Or is there something I have skipped?</div>
<div><br></div><div>Thanks  <div><br></div><div><br></div><div><br></div><div>Sat, Dec 1, 2012 at 12:00 PM,  <span dir="ltr"><<a href="mailto:app_rpt-users-request@ohnosec.org" target="_blank">app_rpt-users-request@ohnosec.org</a>></span> wrote:<div class="gmail_extra">
<div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send App_rpt-users mailing list submissions to<br>
        <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
        <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
        <a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a><br>
<br>
You can reach the person managing the list at<br>
        <a href="mailto:app_rpt-users-owner@ohnosec.org">app_rpt-users-owner@ohnosec.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of App_rpt-users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
   1. Re: Help Motorola GM300 and app_rpt (Keith Goobie)<br>
   2. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)<br>
   3. Re: Help Motorola GM300 and app_rpt (Matt Roberts)<br>
   4. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Fri, 30 Nov 2012 14:37:28 -0400<br>
From: Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>><br>
To: Fernando Villarroel <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
Cc: APP RPT <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
Message-ID: <<a href="mailto:B78A1D10-B416-4B6B-A52D-437B665EEFFA@goobie.org">B78A1D10-B416-4B6B-A52D-437B665EEFFA@goobie.org</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
I am on iPhone right now.  Will do when I get home.<br>
<br>
Keith<br>
<br>
Sent from my iPhone<br>
<br>
On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>> wrote:<br>
<br>
> Dear Keith.<br>
><br>
> Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.<br>
><br>
> Thank you for you help.<br>
><br>
> Enviado desde mi iPhone<br>
><br>
> El 30-11-2012, a las 13:58, Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>> escribi?:<br>
><br>
>> Simplex is not a cable design issue.  It is controlled from rpt.conf and usbradio.conf<br>
>><br>
>> Keith<br>
>><br>
>> Sent from my iPhone<br>
>><br>
>> On Nov 30, 2012, at 12:53 PM, David KE6UPI <<a href="mailto:dshaw@ke6upi.com">dshaw@ke6upi.com</a>> wrote:<br>
>><br>
>>> Are you using one radio in simplex mode? If so you need a simplex cable. <a href="http://www.uricables.com/motorola.html" target="_blank">http://www.uricables.com/motorola.html</a><br>
>>><br>
>>> David<br>
>>><br>
>>><br>
>>> On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>> wrote:<br>
>>>> Dear All.<br>
>>>><br>
>>>> I have installed ACID succesfully<br>
>>>><br>
>>>> I have the follows devices connected:<br>
>>>><br>
>>>> Motorola GM300 conected to my Asterisk (Centos)<br>
>>>><br>
>>>> <a href="http://www.dmkeng.com/URI_Order_Page.htm" target="_blank">http://www.dmkeng.com/URI_Order_Page.htm</a><br>
>>>><br>
>>>> <a href="http://www.uricables.com/DuplexMotorola.html" target="_blank">http://www.uricables.com/DuplexMotorola.html</a> (i have connected from RX Cable)<br>
>>>><br>
>>>> I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.<br>
>>>><br>
>>>> <a href="http://allstarnode.com/viewtopic.php?f=5&t=67" target="_blank">http://allstarnode.com/viewtopic.php?f=5&t=67</a><br>
>>>><br>
>>>> When i try to do *98 i have not audio in radio base and mobiles radios (handy).<br>
>>>><br>
>>>> Does anyone tell me what is the best config for usbradio.conf and rpt.conf?<br>
>>>><br>
>>>> I hope anyone could help me or how i can do.<br>
>>>><br>
>>>> Fernando<br>
>>>><br>
>>>> _______________________________________________<br>
>>>> App_rpt-users mailing list<br>
>>>> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
>>>> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
>>><br>
>>> _______________________________________________<br>
>>> App_rpt-users mailing list<br>
>>> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
>>> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/4e6b9ba4/attachment-0001.html" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/4e6b9ba4/attachment-0001.html</a>><br>

<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Fri, 30 Nov 2012 10:46:03 -0800 (PST)<br>
From: FERNANDO VILLARROEL <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
To: Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>><br>
Cc: APP RPT <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
Message-ID:<br>
        <<a href="mailto:1354301163.31052.YahooMailClassic@web162005.mail.bf1.yahoo.com">1354301163.31052.YahooMailClassic@web162005.mail.bf1.yahoo.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
Ok Keith.<br>
Thank You so much, i am trying to solve this issue from a long time (3 weeks).<br>
I can send the access root for my ACID installation and my MSN ID or Skype, if you want.<br>
<br>
Regards<br>
<br>
--- On Fri, 11/30/12, Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>> wrote:<br>
<br>
From: Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>><br>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
To: "Fernando Villarroel" <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
Cc: "David KE6UPI" <<a href="mailto:dshaw@ke6upi.com">dshaw@ke6upi.com</a>>, "APP RPT" <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
Date: Friday, November 30, 2012, 2:37 PM<br>
<br>
I am on iPhone right now. ?Will do when I get home.?<br>
Keith<br>
<br>
Sent from my iPhone<br>
On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>> wrote:<br>
<br>
Dear Keith.<br>
Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.<br>
Thank you for you help.<br>
<br>
Enviado desde mi iPhone<br>
El 30-11-2012, a las 13:58, Keith Goobie <<a href="mailto:keith@goobie.org">keith@goobie.org</a>> escribi?:<br>
<br>
Simplex is not a cable design issue. ?It is controlled from rpt.conf and usbradio.conf<br>
Keith<br>
<br>
Sent from my iPhone<br>
On Nov 30, 2012, at 12:53 PM, David KE6UPI <<a href="mailto:dshaw@ke6upi.com">dshaw@ke6upi.com</a>> wrote:<br>
<br>
Are you using one radio in simplex mode? If so you need a simplex cable.?<a href="http://www.uricables.com/motorola.html" target="_blank">http://www.uricables.com/motorola.html</a><br>
David<br>
<br>
<br>
On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>> wrote:<br>
<br>
Dear All.<br>
<br>
<br>
<br>
I have installed ACID succesfully<br>
<br>
<br>
<br>
I have the follows devices connected:<br>
<br>
<br>
<br>
Motorola GM300 conected to my Asterisk (Centos)<br>
<br>
<br>
<br>
<a href="http://www.dmkeng.com/URI_Order_Page.htm" target="_blank">http://www.dmkeng.com/URI_Order_Page.htm</a><br>
<br>
<br>
<br>
<a href="http://www.uricables.com/DuplexMotorola.html" target="_blank">http://www.uricables.com/DuplexMotorola.html</a> (i have connected from RX Cable)<br>
<br>
<br>
<br>
I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.<br>
<br>
<br>
<br>
<a href="http://allstarnode.com/viewtopic.php?f=5&t=67" target="_blank">http://allstarnode.com/viewtopic.php?f=5&t=67</a><br>
<br>
<br>
<br>
When i try to do *98 i have not audio in radio base and mobiles radios (handy).<br>
<br>
<br>
<br>
Does anyone tell me what is the best config for usbradio.conf and rpt.conf?<br>
<br>
<br>
<br>
I hope anyone could help me or how i can do.<br>
<br>
<br>
<br>
Fernando<br>
<br>
<br>
<br>
_______________________________________________<br>
<br>
App_rpt-users mailing list<br>
<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/723a5ad0/attachment-0001.html" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/723a5ad0/attachment-0001.html</a>><br>

<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Fri, 30 Nov 2012 15:59:30 -0500<br>
From: Matt Roberts <<a href="mailto:n9gmr@me.com">n9gmr@me.com</a>><br>
To: Fernando Villarroel <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
Cc: APP RPT <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
Message-ID: <<a href="mailto:6FBEE34B-6FE3-4EE5-98A7-7EC8E9FB4C0D@me.com">6FBEE34B-6FE3-4EE5-98A7-7EC8E9FB4C0D@me.com</a>><br>
Content-Type: text/plain; CHARSET=US-ASCII<br>
<br>
<br>
On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:<br>
<br>
> Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.<br>
><br>
I don't think your configuration files are the issue themselves.  Does your node work? Can you transmit to your node, and when people transmit from other nodes can you hear them? Is cop6 defined in RPT.conf? Cop6 determines what command is used to activate PTT on the phone.  Has anyone tried connecting to your node from the portal on the phone and see if what is said is going out over your node?<br>

<br>
<br>
Matt Roberts<br>
<a href="mailto:n9gmr@me.com">n9gmr@me.com</a><br>
Call Sign N9GMR<br>
Allstar 28142<br>
EchoLink 640860<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Fri, 30 Nov 2012 17:41:05 -0800 (PST)<br>
From: FERNANDO VILLARROEL <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
To: Matt Roberts <<a href="mailto:n9gmr@me.com">n9gmr@me.com</a>><br>
Cc: APP RPT <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
Message-ID:<br>
        <<a href="mailto:1354326065.79670.YahooMailClassic@web162006.mail.bf1.yahoo.com">1354326065.79670.YahooMailClassic@web162006.mail.bf1.yahoo.com</a>><br>
Content-Type: text/plain; charset=iso-8859-1<br>
<br>
Dear Matt.<br>
<br>
My ACID is a local installation.<br>
<br>
Yes, i did defined cop6 in rpt.conf<br>
<br>
I have not other nodes connected with this node (1999)<br>
<br>
The radio base (Motorola GM300) and mobiles radios (handys) can transmit very well between both.<br>
<br>
I can call from Zoiper and IAXrpt to Radio Base (1999) and i can doing the following commands:<br>
<br>
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000<br>
0=autopatchdn ; Autopatch down<br>
<br>
99=cop,4 ; Audio test tone<br>
98=cop,6 ; Phone TX key<br>
<br>
But COP6 not works or i can't PTT from softphnes to handys.<br>
<br>
I can call from handy to PSTN and CellPhones.<br>
<br>
When i run the following commands Asterisk show me:<br>
<br>
test*CLI> radio tune rxnoise<br>
tune rxnoise maxtries=12, target=23000, tolerance=2750<br>
tries=0, setting=2, meas=7323<br>
tries=1, setting=6, meas=14436<br>
tries=2, setting=10, meas=26213<br>
tries=3, setting=9, meas=25173<br>
tries=4, setting=9, meas=25229<br>
tries=5, setting=9, meas=25107<br>
tries=6, setting=9, meas=25344<br>
DONE tries=6, setting=563, meas=25344, sqnoise=8140<br>
INFO: RX INPUT ADJUST SUCCESS.<br>
<br>
test*CLI> radio tune rxvoice<br>
INFO: RX VOICE ADJUST START.<br>
target=7200 tolerance=360<br>
tries=0, setting=1.000000, meas=17354<br>
tries=1, setting=0.414890, meas=7179<br>
tries=2, setting=0.416104, meas=7674<br>
tries=3, setting=0.390402, meas=6842<br>
tries=4, setting=0.390402, meas=6866<br>
tries=5, setting=0.390402, meas=6956<br>
DONE tries=5, setting=0.390402, meas=6956.000000<br>
INFO: RX VOICE GAIN ADJUST SUCCESS.<br>
<br>
<br>
Regards.<br>
<br>
--- On Fri, 11/30/12, Matt Roberts <<a href="mailto:n9gmr@me.com">n9gmr@me.com</a>> wrote:<br>
<br>
> From: Matt Roberts <<a href="mailto:n9gmr@me.com">n9gmr@me.com</a>><br>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt<br>
> To: "Fernando Villarroel" <<a href="mailto:fvillarroel@yahoo.com">fvillarroel@yahoo.com</a>><br>
> Cc: "Keith Goobie" <<a href="mailto:keith@goobie.org">keith@goobie.org</a>>, "APP RPT" <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
> Date: Friday, November 30, 2012, 4:59 PM<br>
><br>
> On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:<br>
><br>
> > Do you could tell me a sample config for usbradio.conf<br>
> and rpt.conf because i can't doing work, or how i can do.<br>
> ><br>
> I don't think your configuration files are the issue<br>
> themselves.? Does your node work? Can you transmit to<br>
> your node, and when people transmit from other nodes can you<br>
> hear them? Is cop6 defined in RPT.conf? Cop6 determines what<br>
> command is used to activate PTT on the phone.? Has<br>
> anyone tried connecting to your node from the portal on the<br>
> phone and see if what is said is going out over your node?<br>
><br>
><br>
> Matt Roberts<br>
> <a href="mailto:n9gmr@me.com">n9gmr@me.com</a><br>
> Call Sign N9GMR<br>
> Allstar 28142<br>
> EchoLink 640860<br>
><br>
><br>
<br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
<br>
End of App_rpt-users Digest, Vol 46, Issue 1<br>
********************************************<br>
</blockquote></div><br><br clear="all"><div><br></div>-- <br>Brian<div>KB3ORS</div><div><br></div><div>WAN-RS Tech Support</div><br>
</div></div></div>