<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
Dude??<br><br>First of all, the RTCM has *NOTHING TO DO* with the *decoding* of the CTCSS.<br>That must be provided by an external device, such as a radio, and its result<br>(typically a signal that indicates the presence of valid CTCSS on the receiver's input)<br>needs to be connected to pin 4 of the RTCM.<br><br>Seconds of all, usbradio.conf and all of the tune-menu stuff doesnt have a THING<br>to do with the RTCM's.<br><br>Jim WB6NIL<br><br><div><div id="SkyDrivePlaceholder"></div>> From: kc5daq@gmail.com<br>> To: app_rpt-users@ohnosec.org<br>> Date: Thu, 3 Jan 2013 13:02:55 -0600<br>> Subject: [App_rpt-users] RTCM CTCSS input Tone settings<br>> <br>> Ok this is my first time posting on this forum and I would like to thanks<br>> everyone that has contributed to the Allstar project it has defiantly added<br>> a new dimension to the hobby. <br>> <br>> We are in the progress trying to get past the learning curve of adding two<br>> RTCMs (S/W Version: 1.11 11/04/2012) to our system we currently operate here<br>> in Houston Node 28099. I have them currently connected to Kenwood TKR-820s<br>> configured as a simple radio interface and audio seems to be ok as set per<br>> sw2-2,3 and sw2-4 procedures. I am normally used to setting the audio levels<br>> via the radio-tune-menu but I am guessing that will not work in this case as<br>> I get an error (Error parsing device parameters) on the server I have the<br>> voter.conf files on. So from what I get out of this is the only place to<br>> adjust any audio is on the TRCM and in the voter.conf file is that correct?<br>> Another question is where do I set the ctcss decode settings as I can set<br>> the CTCSS TX in voter.conf but normally the RX CTCSS would be in the<br>> usbradio.conf file if it was a URI.. I am just trying to get some pointers<br>> on setup and troubleshooting methods for the RTCM.<br>> <br>> So my main questions are<br>> <br>> Where is the decode CTCSS set at?<br>> Is there a radio-tune-menu for the TRCM?<br>> Where is the info that menu item 14 set debug level go so I can view it?<br>> More may come later thanks to all :)<br>> FYI I have gone through all the post on this reflector to find these answers<br>> and read the rtcm_manual I am just stumped for the moment<br>> Keep up the good work 73s KC5DAQ<br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>