<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
Gee, I wasnt aware that the Neoware CA-22 was one of the COUPLE<br>supported hardwares for Limey Linux.... ??<br><br>Also, WHY ARE YOU ATTEMPTING TO USE CHAN_USBRADIO ON A PROCESSOR<br>THAT COULDNT POSSIBLY HAVE THE HORSEPOWER TO HANDLE IT??<br><br>Also, Limey Linux INTENTIONALLY does not support *ANY* OS drivers for the<br>parallel port. Its intended to have the userspace programs access it directly<br>with the use of ioperm. You probably are attempting to use a configuration file<br>designed for a 'standard' OS distro.<br><br>Jim WB6NIL<br><br><div><div id="SkyDrivePlaceholder"></div>> From: Benjamin@kb9lfz.com<br>> To: app_rpt-users@ohnosec.org<br>> Date: Thu, 24 Jan 2013 21:04:54 -0500<br>> Subject: [App_rpt-users] limey linux and parallel ports<br>> <br>> Hello Gentlemen,<br>> <br>> I've been trying to get limey linux to work with some parallel ports.<br>> and it ain't working to what I think it should be.<br>> <br>> I'm using a Neoware CA-22 with 1GB RAM, 1GB flash and 1GHz processor. It<br>> boots and appears to run fine.<br>> <br>> I've configured it according to what K0KN and the info from ohnosec.org<br>> website. <br>> <br>> Something it not what it should be. There's always voltages on the<br>> parallel port pins I've specified in usbradio.conf. The voltage on pin 3<br>> for ptt is at 2.4V and 4.8V on pins four and five. I have not run any<br>> commands on there to manually turn them on. When I run the command from<br>> the K0KN website to manually turn on the pin 3, the damn voltage still<br>> sits at 2.4V. When I run the command to turn it off, it still sits at<br>> 2.4V on that pin. Same thing for the other two pins. I don't understand<br>> why one of the GPIO pins sits at 2.4V and the other sit at 4.8V when the<br>> pins are set to be default off. Shouldn't the 'off' setting be zero<br>> volts, or something very close to zero?<br>> <br>> Below is what I added usbradio.conf for the parallel pins config:<br>> pp3 = ptt<br>> pp4 = out0 ;aux1<br>> pp5 = out0 ;aux2<br>> pp6 = out0 ;aux3<br>> pp11 = cor<br>> <br>> <br>> Am I missing something? Something not correct? I'm rather disappointed<br>> the documentation is not very helpful in terms of what full configs<br>> should look like and the lack of references to teach new allstarlink<br>> dummies like me.<br>> <br>> ~Benjamin, KB9LFZ<br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>