<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Re: [App_rpt-users] Couple of issues...</TITLE>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19328">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>To triple the comment, you sound like your general
audio settings are bad. Echolink audio is nothing short of horrible, don't set
up to that. If you set the repeater modulation as per the asterisk app_rpt setup
procedure the audio will be fantastic. Except for echolink. In rpt.conf there
are settings to increase/decrease audio levels to and from echolink. But good
luck setting those, as far as I have seen there is no "standard" for Echolink.
There is very definetly for the Asterisk/Allstar side. </FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2 face=Arial>But another part of your comment makes me curious,
is the computer running Asterisk the controller for the repeater? That's best
but it sounds like you may have said computer connected to a repeater
controller. All bets are off there. I say this because you suggest that the
repeater audio is ok, but asterisk conncts are low. This suggests a
repeater audio path that is different for loacl repeat audio and
asterisk/allstar. </FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2 face=Arial>GeorgeC</FONT></DIV>
<DIV><FONT size=2 face=Arial>W2DB</FONT></DIV>
<DIV><FONT size=2 face=Arial>2360</FONT> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=keith@goobie.org href="mailto:keith@goobie.org">Keith Goobie</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=kb8pmy@kb8pmy.net
href="mailto:kb8pmy@kb8pmy.net">Ryan Collier</A> ; <A
title=app_rpt-users@ohnosec.org
href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, March 16, 2013 8:57
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [App_rpt-users] Couple of
issues...</DIV>
<DIV><BR></DIV><FONT face=Arial><SPAN style="FONT-SIZE: 12pt">Ryan<BR><BR>1.
Another users suggested that you make sure that the Asterisk audio be set-up
first. This is very good counsel. Follow the procedures as
dictated in the allstarlink.org web site. Once that is complete, you can
adjust the Echolink audio as a parameter in the usbradio config file.
Look for erxgain and etxgain in rpt.conf.<BR><BR>2. When the user
sets up the iaxrpt client, the second tab in the preferences allows the user
to set his callsign. Whne that is done, he will be announced on
the node. If the user does not set this he connects in a stealthy
manner. Otherwise if a value is set, then they are announced during
connects and disconnects. If everyone follows this, then you can move
forward with a common userid and password.<BR><BR>3. Where is your voicemail
with respect to asterisk & the bare repeater. You need to supply a
little more detail, before people can respond. I think that you are
looking to pass dtmf from a remote user to your repeater so that they can get
voicemail – but I am guessing that this is what you are
seeking.<BR><BR>Cheers<BR>Keith / VA3YC<BR><BR><BR>On 3/15/13 11:31 PM, "Ryan
Collier" <<A href="kb8pmy@kb8pmy.net">kb8pmy@kb8pmy.net</A>>
wrote:<BR><BR></SPAN></FONT>
<BLOCKQUOTE><FONT face=Arial><SPAN
style="FONT-SIZE: 12pt">Greetings,<BR><BR>I have been working on the node
the past couple of days. <BR><BR>Here is my problems. <BR><BR>1. The
incoming echolink audio is fine the repeater audio is fine. But the incoming
asterisk connects are low. Can I adjust that?<BR><BR>2. When an iaxrpt user
connects. I can not get the caller id out for that person. I have ,made
everyone there own sign in. It is easier on me. Is there a way I can fix
this?<BR><BR>3. I have voicemail working ont he repeater. You can access it
from RF. But I can not get it to the point where they can check there mail.
I can not get login to voiccemailmain to work right. Can I get help on this
also?<BR><BR>73<BR>Ryan<BR>KB8PMY<BR><BR><BR>
<HR align=center SIZE=3 width="95%">
</SPAN></FONT><FONT size=2><FONT face="Consolas, Courier New, Courier"><SPAN
style="FONT-SIZE: 10pt">_______________________________________________<BR>App_rpt-users
mailing list<BR><A
href="App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</A><BR><A
href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</A><BR></SPAN></FONT></FONT></BLOCKQUOTE><FONT
size=2><FONT face="Consolas, Courier New, Courier"><SPAN
style="FONT-SIZE: 10pt"><BR></SPAN></FONT></FONT><FONT face=Arial><SPAN
style="FONT-SIZE: 12pt">-- <BR><A
href="keith@goobie.org">keith@goobie.org</A><BR>Keith Goobie<BR>Richmond Hill,
ON, CANADA<BR></BLOCKQUOTE></SPAN></FONT></BODY></HTML>