<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=content-type></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Thanks George. Yup I did savec. there is still a little burst at the end of
the tx before the CT but its is a lot less then it was.. </DIV>
<DIV> </DIV>
<DIV>will have to work a bit more on this..</DIV>
<DIV> </DIV>
<DIV>And I did saved ;-)</DIV>
<DIV> </DIV>
<DIV>happy easter!</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV style="FONT: 10pt tahoma">
<DIV> </DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=george@dyb.com
href="mailto:george@dyb.com">George Csahanin</A> </DIV>
<DIV><B>Sent:</B> Friday, March 29, 2013 8:36 PM</DIV>
<DIV><B>To:</B> <A title=petem001@hotmail.com
href="mailto:petem001@hotmail.com">Pierre Martel</A> </DIV>
<DIV><B>Cc:</B> <A title=app_rpt-users@ohnosec.org
href="mailto:app_rpt-users@ohnosec.org">APP RPT</A> </DIV>
<DIV><B>Subject:</B> Re: [App_rpt-users] Something is rotten in the state of
Denmark</DIV></DIV></DIV>
<DIV> </DIV></DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV>Pierre, ignore the high freq message, all of mine do that and work just
fine...</DIV>
<DIV> </DIV>
<DIV>Good luck. I hope you did "save"</DIV>
<DIV> </DIV>
<DIV>George 2360<BR><BR>Sent from my iPad</DIV>
<DIV><BR>On Mar 29, 2013, at 7:21 PM, "Pierre Martel" <<A
href="mailto:petem001@hotmail.com">petem001@hotmail.com</A>>
wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>
<META name=GENERATOR content="MSHTML 8.00.6001.19328">
<STYLE></STYLE>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Ok got it to tune. with rxboost=1. Did I forgot to reload the data when I
made my initial test? dont know.. </DIV>
<DIV> </DIV>
<DIV>the program did told me that there was not a lot of high freq and not to
use dsp.</DIV>
<DIV> </DIV>
<DIV>But I find this odd.. Did try another URI-x, same thing. so my URI are
either bad or either both good.</DIV>
<DIV> </DIV>
<DIV>Using pin 21 and ground 19 is this a bad idea? There is a voltage going
out from my msr2000 pin 5, I dont think it would be wise to plug it to the mic
in dc on the URI..</DIV>
<DIV> </DIV>
<DIV>here is the whole process..</DIV>
<DIV> </DIV>
<DIV>ve2mrc*CLI> radio active usb28739</DIV>
<DIV>Active (command) USB Radio device set to [usb28739]</DIV>
<DIV>ve2mrc*CLI> radio tune rxnoise</DIV>
<DIV>tune rxnoise maxtries=12, target=27000, tolerance=2750</DIV>
<DIV>tries=0, setting=2, meas=8224</DIV>
<DIV>tries=1, setting=7, meas=20627</DIV>
<DIV>tries=2, setting=9, meas=26110</DIV>
<DIV>tries=3, setting=9, meas=25809</DIV>
<DIV>tries=4, setting=9, meas=26031</DIV>
<DIV>tries=5, setting=9, meas=25882</DIV>
<DIV>tries=6, setting=9, meas=25827</DIV>
<DIV>DONE tries=6, setting=563, meas=25827, sqnoise=8293</DIV>
<DIV>INFO: RX INPUT ADJUST SUCCESS.</DIV>
<DIV>WARNING: Insufficient high frequency noise from receiver.</DIV>
<DIV>WARNING: Rx input point may be de-emphasized and not flat.</DIV>
<DIV> usbradio.conf setting of
'carrierfrom=dsp' not recommended.</DIV>
<DIV>WARNING: RSSI=748 SQUELCH=500 and is set too loose.</DIV>
<DIV> Use 'radio tune
rxsquelch' to adjust.</DIV>
<DIV>ve2mrc*CLI> radio tune rxsquelch</DIV>
<DIV>Current Signal Strength is 755</DIV>
<DIV>Current Squelch setting is 500</DIV>
<DIV>ve2mrc*CLI> radio tune rxtone</DIV>
<DIV>INFO: RX CTCSS ADJUST START.</DIV>
<DIV>target=2400 tolerance=100</DIV>
<DIV>tries=0, setting=1.000000, meas=847</DIV>
<DIV>tries=1, setting=2.833530, meas=2379</DIV>
<DIV>tries=2, setting=2.858542, meas=2402</DIV>
<DIV>tries=3, setting=2.856162, meas=2401</DIV>
<DIV>tries=4, setting=2.856162, meas=2405</DIV>
<DIV>tries=5, setting=2.856162, meas=2397</DIV>
<DIV>DONE tries=5, setting=2.856162, meas=2397.00</DIV>
<DIV>INFO: RX CTCSS GAIN ADJUST SUCCESS.</DIV>
<DIV>INFO: RX RSSI=989</DIV>
<DIV> -- Hungup 'Zap/pseudo-2047300106'</DIV>
<DIV>ve2mrc*CLI> radio tune rxvoice</DIV>
<DIV>INFO: RX VOICE ADJUST START.</DIV>
<DIV>target=7200 tolerance=360</DIV>
<DIV>tries=0, setting=1.000000, meas=11572</DIV>
<DIV>tries=1, setting=0.622191, meas=6708</DIV>
<DIV>tries=2, setting=0.667826, meas=7197</DIV>
<DIV>tries=3, setting=0.668105, meas=6958</DIV>
<DIV>tries=4, setting=0.668105, meas=7229</DIV>
<DIV>tries=5, setting=0.668105, meas=6849</DIV>
<DIV>DONE tries=5, setting=0.668105, meas=6849.000000</DIV>
<DIV>INFO: RX VOICE GAIN ADJUST SUCCESS.</DIV>
<DIV> -- Hungup 'Zap/pseudo-1459324833'</DIV>
<DIV> -- Hungup 'Zap/pseudo-1663732594'</DIV>
<DIV>ve2mrc*CLI> radio tune save</DIV>
<DIV>Saved radio tuning settings to usbradio_tune_usb28739.conf</DIV>
<DIV>[Mar 29 20:00:14] NOTICE[2331]: chan_usbradio.c:1771 hidthread: USB
Parameters written to EEPROM on usb28739</DIV>
<DIV> </DIV>
<DIV>Now after reading the second notice I am think if I am not mixing again
with my flat vs de-emphasis audio.. </DIV>
<DIV> </DIV>
<DIV>right now I stated that my audio is flat with rxdemod=flat... Am I
ok?</DIV>
<DIV> </DIV>
<DIV>Thanks for your help.. this is getting in my head.. LOL</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV style="FONT: 10pt tahoma">
<DIV> </DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=george@dyb.com
href="mailto:george@dyb.com">George Csahanin</A> </DIV>
<DIV><B>Sent:</B> Friday, March 29, 2013 3:55 PM</DIV>
<DIV><B>To:</B> <A title=petem001@hotmail.com
href="mailto:petem001@hotmail.com">Pierre Martel</A> </DIV>
<DIV><B>Subject:</B> Re: [App_rpt-users] Something is rotten in the state of
Denmark</DIV></DIV></DIV>
<DIV> </DIV></DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV><FONT size=2 face=Arial>Last question first, yes, always save the
settings unless you know t is only temporary. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>The RXNOISE test suggests that there isn not
enough noise getting to the URI. It had the gain as high as possible and still
doesn''t see the amount of noise it needs. Again, that does account for your
symptom. My MSR2000 manual is a UHF unit, but the control side should be
looking for the same amoiunt of noise, I'll get out the manual. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>OK, VHF and UHF are identical here. Where you
pickup noise/rx detect audio is about 250mV. I really don't know if that is
enough to drive it all. It may not be. It is amplified in the Receiver
Audio/Squelch board to 380 mvRMS. That is off the output of U1 on the receive
audio/squelch board which in two receiver kodels is a horizontal card
under teh vertically slotted cards. In a single frequency model it is in
position 7 There is no pin where the amplified detected audio comes out, so it
requires surgery. I would capacitively couple itr to pin 1 of U1This is a
place where JU101, JU102, R7 (pot) , R4 (pot),m R6 33k and U1 pin 1 connect.
</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I'd re-check your connections and DC isolation
first. I know this audio in might have voltage pn it. Or that may be the
tranamit side. Wait! Just noticed something important. Your rxboost=0 on
28739. The amount you're off on the level should easily be made up there. It
WILL make a difference. I just tried with rxboost=0, normal for me, and noted
gain at 13 for that. I changed rxboost=1, restarted asterisk and now doe the
test. Level went to 32000 gain at 0 or 1, and failed. Too high. Backed it down
and it was ok. My point is that rxboost WILL make a difference for you. Then
it is a matter of setting squelch. I look at radio tune rxsquelch several
times and set the squelch point to be about 150 to 200 over the rxnoiselevel
(labeled Signal Strength)</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>GeorgeC</FONT></DIV>
<DIV><FONT size=2 face=Arial>Node 2360, try connecting when you get
it...</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Here's my setup:</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>[usb2360]</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2
face=Arial>hdwtype=0<BR>rxboost=0<BR>txboost=1<BR>rxctcssrelax=1<BR>txctcssdefault=114.8<BR>rxctcssfreqs=114.8<BR>txctcssfreqs=114.8<BR>rxctcssoverride=0<BR>carrierfrom=dsp<BR>ctcssfrom=dsp<BR>rxdemod=flat<BR>txprelim=yes<BR>txlimonly=no<BR>txtoctype=notone<BR>txmixa=composite<BR>txmixb=composite<BR>invertptt=0<BR>duplex=1<BR>rxondelay=0<BR>rxnoisefiltype=0<BR>rxsquelchdelay=100
; delayline in ms carrier squelch tail eliminator<BR>eeprom=0</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Don't know what else to suggest...</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>GeorgeC</FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=petem001@hotmail.com href="mailto:petem001@hotmail.com">Pierre
Martel</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=george@dyb.com
href="mailto:george@dyb.com">George Csahanin</A> ; <A
title=app_rpt-users@ohnosec.org href="mailto:app_rpt-users@ohnosec.org">APP
RPT</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, March 29, 2013 12:57
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [App_rpt-users] Something
is rotten in the state of Denmark</DIV>
<DIV> </DIV>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Goerge, if you take a look at the receiver part of the mrs 2000 you
will see that it connect to the back plane by a connector, those connection
then goes to various part of the repeater for filtering and tone detection
on vairous different cards.. I take the audio signal directly from pin 5 of
the receiver board. I dont see any filtering on the reciver board. In
fact from the service manual that you can find here (for the vhf receiver)
<A
href="http://www.repeater-builder.com/motorola/msr2000/pdfs/vhf-msr2000-receiver.pdf"><FONT
face="Times New Roman">http://www.repeater-builder.com/motorola/msr2000/pdfs/vhf-msr2000-receiver.pdf</FONT></A></DIV>
<DIV> </DIV>
<DIV>on page 7 there is a block diagram of the receiver and we can easily
see that there is no audio limitting and or filtering at all on the
board. Nad the leevl that I can see on my scope is pretty close to 250
mv as stated on the service manual..</DIV>
<DIV> </DIV>
<DIV>I think that the trouble is with my settings..</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>I am working on the 28739 node.</DIV>
<DIV> </DIV>
<DIV>here is my usbradio.conf file</DIV>
<DIV> </DIV>
<DIV>[general]</DIV>
<DIV> </DIV>
<DIV>[usb27821]</DIV>
<DIV> </DIV>
<DIV>hdwtype=0</DIV>
<DIV>rxboost=1</DIV>
<DIV>txboost=1</DIV>
<DIV>rxctcssrelax=1</DIV>
<DIV>txctcssdefault=103.5</DIV>
<DIV>rxctcssfreqs=103.5</DIV>
<DIV>txctcssfreqs=103.5</DIV>
<DIV>;rxctcssoverride=0</DIV>
<DIV>carrierfrom=dsp</DIV>
<DIV>ctcssfrom=dsp</DIV>
<DIV>rxdemod=flat</DIV>
<DIV>txprelim=yes</DIV>
<DIV>txlimonly=no</DIV>
<DIV>txtoctype=no</DIV>
<DIV>txmixa=composite</DIV>
<DIV>txmixb=composite</DIV>
<DIV>invertptt=0</DIV>
<DIV>duplex=0</DIV>
<DIV>rxondelay=1</DIV>
<DIV>rxnoisefiltype=0</DIV>
<DIV>eeprom=1</DIV>
<DIV> </DIV>
<DIV>[usb28739]</DIV>
<DIV> </DIV>
<DIV>hdwtype=0</DIV>
<DIV>rxboost=0</DIV>
<DIV>txboost=0</DIV>
<DIV>rxctcssrelax=0</DIV>
<DIV>txctcssdefault=103.5</DIV>
<DIV>rxctcssfreqs=103.5</DIV>
<DIV>txctcssfreqs=103.5</DIV>
<DIV>;rxctcssoverride=0</DIV>
<DIV>carrierfrom=dsp</DIV>
<DIV>ctcssfrom=dsp</DIV>
<DIV>rxdemod=flat</DIV>
<DIV>txprelim=yes</DIV>
<DIV>txlimonly=no</DIV>
<DIV>txtoctype=no</DIV>
<DIV>txmixa=composite</DIV>
<DIV>txmixb=composite</DIV>
<DIV>invertptt=0</DIV>
<DIV>duplex=1</DIV>
<DIV>rxondelay=0</DIV>
<DIV>rxnoisefiltype=1</DIV>
<DIV>eeprom=1</DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV style="FONT: 10pt tahoma">
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri>I did not touch the 27821 one since I put it
down to use one main controler not a machine connected to port 3 of our
rc210, so I know its not ok..</FONT></DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri>when i try to tune the base
noise....</FONT></DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV>ve2mrc*CLI> radio active usb28739</DIV>
<DIV>Active (command) USB Radio device set to [usb28739]</DIV>
<DIV>ve2mrc*CLI> radio tune rxnoise</DIV>
<DIV>tune rxnoise maxtries=12, target=27000, tolerance=2750</DIV>
<DIV>tries=0, setting=2, meas=1754</DIV>
<DIV>tries=1, setting=16, meas=16505</DIV>
<DIV>tries=2, setting=16, meas=17517</DIV>
<DIV>tries=3, setting=16, meas=15942</DIV>
<DIV>tries=4, setting=16, meas=15816</DIV>
<DIV>tries=5, setting=16, meas=16604</DIV>
<DIV>tries=6, setting=16, meas=17943</DIV>
<DIV>tries=7, setting=16, meas=17805</DIV>
<DIV>tries=8, setting=16, meas=15489</DIV>
<DIV>tries=9, setting=16, meas=18234</DIV>
<DIV>tries=10, setting=16, meas=16747</DIV>
<DIV>tries=11, setting=16, meas=17647</DIV>
<DIV>DONE tries=12, setting=1000, meas=17647, sqnoise=5040</DIV>
<DIV>ERROR: RX INPUT ADJUST FAILED.</DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri>then I set rxtone and rx voice. but I have a
long tail of noise (about 500 ms) before it stop then I have no sound and
the courtesy tone..</FONT></DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri>I never saved my settings before making test,
would that be the problem? do i need to save the settings every time I
adjust the system so that the settings are used in my test?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV><FONT size=3 face=Calibri></FONT> </DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=george@dyb.com
href="mailto:george@dyb.com">George Csahanin</A> </DIV>
<DIV><B>Sent:</B> Friday, March 29, 2013 2:33 AM</DIV>
<DIV><B>To:</B> <A title=petem001@hotmail.com
href="mailto:petem001@hotmail.com">Pierre Martel</A> </DIV>
<DIV><B>Subject:</B> Re: [App_rpt-users] Something is rotten in the state of
Denmark</DIV></DIV></DIV>
<DIV> </DIV></DIV>
<DIV
style="FONT-STYLE: normal; DISPLAY: inline; FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: small; FONT-WEIGHT: normal; TEXT-DECORATION: none">
<DIV><FONT size=2 face=Arial>Pierre, are you sure that you are getting
wideband noise to the usb device? Before de-emphasis? I am looking at a
manual for a MSR2000 and it shows a "variable gain amplifier (U1) which
feeds the squalch detector, but alsdo feeds a low pass filter on its way to
the noise gate and also feeds a de-emphasis network (U2). Any audio after
that cannot have enough hi frequency component to make the setup for tune
rxnoise work properly, which will not let the squelch work properly. The
long squelch tail you refer to is usbradio not having its squelch set
properly. And that cannot be done without wide band noise in. The result
would never have enough hi freq noise at the uri to actually squelch the
radio. What is eventually kmuting it is the end of input PL
tone...</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Just my thoughts, but I have never had my hands
on a MSR2000. I own one, just haven't received it yet. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>GeorgeC</FONT></DIV>
<DIV><FONT size=2 face=Arial>W2DB</FONT></DIV>
<DIV><FONT size=2 face=Arial>2360</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=petem001@hotmail.com href="mailto:petem001@hotmail.com">Pierre
Martel</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=app_rpt-users@ohnosec.org
href="mailto:app_rpt-users@ohnosec.org">APP RPT</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, March 27, 2013 9:38
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [App_rpt-users] Something is
rotten in the state of Denmark</DIV>
<DIV> </DIV>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Got that phrase in the head, and could not find a good title for the
mail ;-)</DIV>
<DIV> </DIV>
<DIV>Ok Here I am again.</DIV>
<DIV> </DIV>
<DIV>Still with my project to have a full App_rpt controler for my 2
repeater system.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>I manage to have our msr 2000 in the shack today cause the exiter is
giving us some trouble.</DIV>
<DIV> </DIV>
<DIV>so I said, lets fix the exiter AND plug in the URI so that I wont
have to do this on site.</DIV>
<DIV> </DIV>
<DIV>exiter is ok, well for now...</DIV>
<DIV> </DIV>
<DIV>So I connect the URI pin 22 (mic AC) to pin 5 of the receiver inside
the msr2000, why 22 there is a big dc bias at this place so uning the mic
dc would nt be wise, I beleive..</DIV>
<DIV> </DIV>
<DIV>now I go to the computer set active radio usb 28739</DIV>
<DIV> </DIV>
<DIV>now I do radio tune rxnoise.. It fail.</DIV>
<DIV> </DIV>
<DIV>there is at leat 200 mv of audio there. changed rxboosst in
usbradio.conf for that node, reload, no difference.</DIV>
<DIV> </DIV>
<DIV>still did the radio tune rxvoice and rxtone.</DIV>
<DIV> </DIV>
<DIV>then tested without saving , I have a big white noise at the end of
every receiption before the coutesy tone..</DIV>
<DIV> </DIV>
<DIV>what Am I doing wrong?</DIV>
<DIV> </DIV>
<DIV> </DIV></DIV></DIV></BLOCKQUOTE></DIV></DIV></DIV></BLOCKQUOTE></DIV></DIV></DIV></DIV></BLOCKQUOTE></DIV></DIV></DIV></BODY></HTML>