<p>I'll run the French verion through Google Translate ^.~ hehe, I'm such a cheat...</p>
<p>When you have a document composed, email it through, and I'll have a look-see. You might want to run it past someone else for technical, I'll look at grammar and syntax for you.</p>
<p>Glad to be of help =)</p>
<div class="gmail_quote">On Apr 1, 2013 2:57 AM, "Pierre Martel" <<a href="mailto:petem001@hotmail.com">petem001@hotmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div dir="ltr">
<div style="font-size:12pt;font-family:'Calibri'">
<div>I will take the offer!!</div>
<div> </div>
<div>I will also do it in french, but I will post it on my club web site..
</div>
<div>Won’t need proof reading for this one ;-)</div>
<div> </div>
<div style="font-size:small;font-style:normal;text-decoration:none;font-family:'Calibri';display:inline;font-weight:normal">
<div style="FONT:10pt tahoma">
<div> </div>
<div style="BACKGROUND:#f5f5f5">
<div><b>From:</b> <a title="edgecomberts@gmail.com" href="mailto:edgecomberts@gmail.com" target="_blank">Shane Morris</a> </div>
<div><b>Sent:</b> Sunday, March 31, 2013 11:43 AM</div>
<div><b>To:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> </div>
<div><b>Cc:</b> <a title="app_rpt-users@ohnosec.org" href="mailto:app_rpt-users@ohnosec.org" target="_blank">APP RPT</a> </div>
<div><b>Subject:</b> Re: [App_rpt-users] Something is rotten in the state of
Denmark(well no so much)?</div></div></div>
<div> </div></div>
<div style="font-size:small;font-style:normal;text-decoration:none;font-family:'Calibri';display:inline;font-weight:normal">
<p dir="ltr">Can't say about posting it to ohnosec, thats not my department, but
if you'd wish me to proof read the document for you, I certainly can give you
some time. I think such a document would be rather valuable to the
community.</p>
<div class="gmail_quote">On 01/04/2013 2:41 AM, "Pierre Martel" <<a href="mailto:petem001@hotmail.com" target="_blank">petem001@hotmail.com</a>> wrote:<br type="attribution">
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div dir="ltr" text="#000000" bgcolor="#ffffff">
<div dir="ltr">
<div style="FONT-FAMILY:'Calibri';FONT-SIZE:12pt">
<div>I am working a HOW TO for tuning radio so that some other not so
bright as me will be able to do a tuning with out clogging the mailling list
;-).</div>
<div> </div>
<div>Wi there be a place to post it on the ohnesec web page if it’s up to the
standard of the group??</div>
<div> </div>
<div>I will need someone more fluent then me in english to proof read it. My
english is far from being good enough..</div>
<div> </div>
<div> </div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div style="FONT:10pt tahoma">
<div> </div>
<div style="BACKGROUND:#f5f5f5">
<div><b>From:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> </div>
<div><b>Sent:</b> Sunday, March 31, 2013 11:26 AM</div>
<div><b>To:</b> <a title="jrorke@cogeco.ca" href="mailto:jrorke@cogeco.ca" target="_blank">jrorke@cogeco.ca</a> ; <a title="app_rpt-users@ohnosec.org" href="mailto:app_rpt-users@ohnosec.org" target="_blank">APP RPT</a> </div>
<div><b>Subject:</b> Re: [App_rpt-users] Something is rotten in the state of
Denmark(well no so much)?</div></div></div>
<div> </div></div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div dir="ltr">
<div style="FONT-FAMILY:'Calibri';FONT-SIZE:12pt">
<div>Looks like you did gave me the info I needed.. The squelch is now set
properly (850) and all is working as I wished.</div>
<div> </div>
<div>Now lets work on the transmitter!</div>
<div> </div>
<div> </div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div style="FONT:10pt tahoma">
<div> </div>
<div style="BACKGROUND:#f5f5f5">
<div><b>From:</b> <a title="jrorke@cogeco.ca" href="mailto:jrorke@cogeco.ca" target="_blank">REDBUTTON_CTRL</a> </div>
<div><b>Sent:</b> Sunday, March 31, 2013 8:05 AM</div>
<div><b>Cc:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> ; <a title="app_rpt-users@ohnosec.org" href="mailto:app_rpt-users@ohnosec.org" target="_blank">APP RPT</a> </div>
<div><b>Subject:</b> Re: [App_rpt-users] Something is rotten in the state of
Denmark (well no so much)?</div></div></div>
<div> </div></div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">Hi
Pierre, ok looking at your output below, you did get the warning but as
mentioned earlier this happens on a lot of radios but doesn't always mean it
wont work.<br><br>
<blockquote type="cite">
<div>WARNING: Insufficient high frequency noise from receiver.</div>
<div>WARNING: Rx input point may be de-emphasized and not flat.</div>
<div> usbradio.conf setting
of 'carrierfrom=dsp' not recommended.</div>
<div>WARNING: RSSI=748 SQUELCH=500 and is set too loose.</div>
<div> Use 'radio tune
rxsquelch' to adjust.</div>
<div>ve2mrc*CLI> radio tune rxsquelch</div>
<div>Current Signal Strength is 755</div>
<div>Current Squelch setting is 500</div></blockquote><br>This is saying your
squelch is open right now. If you take tone decode off you will hear the
squelch noise. You need to set your squelch. <br><br>When you just do a radio
tune rxsquelch, it doesn't set any thing but it reports the current measured
signal and the squelch setting. <br><br>From the above info, your squelch is
set to 500 and the signal is 755. To close the squelch you need to set your
squelch to a value greater then the rx signal level.<br>To do this, type in
this command:<br>radio tune rxsquelch 800<br><br>This will set the squelch to
800 which is above the RX level and the squelch will close. Then do a radio
tune save.<br><br>It looks like the discriminator input is ok or it wouldn't
even read the rx level from your MSR 2000.<br><br>Once you confirm the squelch
is now working, you can fine tune the squelch setting to your
linking.<br><br>I generally find the DSP squelch needs to be 50 to 100 points
above the idle RX level for reasonable operation. YMMV.<br><br>Hope this
helps.<br><br>Jon VA3RQ<br><br><br>On 3/29/2013 8:36 PM, George Csahanin
wrote:
<blockquote type="cite">
<div>Pierre, ignore the high freq message, all of mine do that and work just
fine...</div>
<div> </div>
<div>Good luck. I hope you did "save"</div>
<div> </div>
<div>George 2360<br><br>Sent from my iPad</div>
<div><br>On Mar 29, 2013, at 7:21 PM, "Pierre Martel" <<a href="mailto:petem001@hotmail.com" target="_blank">petem001@hotmail.com</a>> wrote:<br><br></div>
<blockquote type="cite">
<div>
<div dir="ltr">
<div style="FONT-FAMILY:'Calibri';FONT-SIZE:12pt">
<div>Ok got it to tune. with rxboost=1. Did I forgot to reload the data
when I made my initial test? dont know.. </div>
<div> </div>
<div>the program did told me that there was not a lot of high freq and not
to use dsp.</div>
<div> </div>
<div>But I find this odd.. Did try another URI-x, same thing. so my URI
are either bad or either both good.</div>
<div> </div>
<div>Using pin 21 and ground 19 is this a bad idea? There is a voltage
going out from my msr2000 pin 5, I dont think it would be wise to plug it
to the mic in dc on the URI..</div>
<div> </div>
<div>here is the whole process..</div>
<div> </div>
<div>ve2mrc*CLI> radio active usb28739</div>
<div>Active (command) USB Radio device set to [usb28739]</div>
<div>ve2mrc*CLI> radio tune rxnoise</div>
<div>tune rxnoise maxtries=12, target=27000, tolerance=2750</div>
<div>tries=0, setting=2, meas=8224</div>
<div>tries=1, setting=7, meas=20627</div>
<div>tries=2, setting=9, meas=26110</div>
<div>tries=3, setting=9, meas=25809</div>
<div>tries=4, setting=9, meas=26031</div>
<div>tries=5, setting=9, meas=25882</div>
<div>tries=6, setting=9, meas=25827</div>
<div>DONE tries=6, setting=563, meas=25827, sqnoise=8293</div>
<div>INFO: RX INPUT ADJUST SUCCESS.</div>
<div>WARNING: Insufficient high frequency noise from receiver.</div>
<div>WARNING: Rx input point may be de-emphasized and not flat.</div>
<div> usbradio.conf
setting of 'carrierfrom=dsp' not recommended.</div>
<div>WARNING: RSSI=748 SQUELCH=500 and is set too loose.</div>
<div> Use 'radio tune
rxsquelch' to adjust.</div>
<div>ve2mrc*CLI> radio tune rxsquelch</div>
<div>Current Signal Strength is 755</div>
<div>Current Squelch setting is 500</div>
<div>ve2mrc*CLI> radio tune rxtone</div>
<div>INFO: RX CTCSS ADJUST START.</div>
<div>target=2400 tolerance=100</div>
<div>tries=0, setting=1.000000, meas=847</div>
<div>tries=1, setting=2.833530, meas=2379</div>
<div>tries=2, setting=2.858542, meas=2402</div>
<div>tries=3, setting=2.856162, meas=2401</div>
<div>tries=4, setting=2.856162, meas=2405</div>
<div>tries=5, setting=2.856162, meas=2397</div>
<div>DONE tries=5, setting=2.856162, meas=2397.00</div>
<div>INFO: RX CTCSS GAIN ADJUST SUCCESS.</div>
<div>INFO: RX RSSI=989</div>
<div> -- Hungup 'Zap/pseudo-<a href="tel:2047300106" value="+12047300106" target="_blank">2047300106</a>'</div>
<div>ve2mrc*CLI> radio tune rxvoice</div>
<div>INFO: RX VOICE ADJUST START.</div>
<div>target=7200 tolerance=360</div>
<div>tries=0, setting=1.000000, meas=11572</div>
<div>tries=1, setting=0.622191, meas=6708</div>
<div>tries=2, setting=0.667826, meas=7197</div>
<div>tries=3, setting=0.668105, meas=6958</div>
<div>tries=4, setting=0.668105, meas=7229</div>
<div>tries=5, setting=0.668105, meas=6849</div>
<div>DONE tries=5, setting=0.668105, meas=6849.000000</div>
<div>INFO: RX VOICE GAIN ADJUST SUCCESS.</div>
<div> -- Hungup 'Zap/pseudo-1459324833'</div>
<div> -- Hungup 'Zap/pseudo-1663732594'</div>
<div>ve2mrc*CLI> radio tune save</div>
<div>Saved radio tuning settings to usbradio_tune_usb28739.conf</div>
<div>[Mar 29 20:00:14] NOTICE[2331]: chan_usbradio.c:1771 hidthread: USB
Parameters written to EEPROM on usb28739</div>
<div> </div>
<div>Now after reading the second notice I am think if I am not mixing
again with my flat vs de-emphasis audio.. </div>
<div> </div>
<div>right now I stated that my audio is flat with rxdemod=flat... Am I
ok?</div>
<div> </div>
<div>Thanks for your help.. this is getting in my head.. LOL</div>
<div> </div>
<div> </div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div style="FONT:10pt tahoma">
<div> </div>
<div style="BACKGROUND:#f5f5f5">
<div><b>From:</b> <a title="george@dyb.com" href="mailto:george@dyb.com" target="_blank">George Csahanin</a> </div>
<div><b>Sent:</b> Friday, March 29, 2013 3:55 PM</div>
<div><b>To:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> </div>
<div><b>Subject:</b> Re: [App_rpt-users] Something is rotten in the state
of Denmark</div></div></div>
<div> </div></div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div><font face="Arial">Last question first, yes, always save the settings
unless you know t is only temporary. </font></div>
<div> </div>
<div><font face="Arial">The RXNOISE test suggests that there isn not enough
noise getting to the URI. It had the gain as high as possible and still
doesn''t see the amount of noise it needs. Again, that does account for
your symptom. My MSR2000 manual is a UHF unit, but the control side should
be looking for the same amoiunt of noise, I'll get out the manual.
</font></div>
<div> </div>
<div><font face="Arial">OK, VHF and UHF are identical here. Where you pickup
noise/rx detect audio is about 250mV. I really don't know if that is
enough to drive it all. It may not be. It is amplified in the Receiver
Audio/Squelch board to 380 mvRMS. That is off the output of U1 on the
receive audio/squelch board which in two receiver kodels is a
horizontal card under teh vertically slotted cards. In a single frequency
model it is in position 7 There is no pin where the amplified detected
audio comes out, so it requires surgery. I would capacitively couple itr
to pin 1 of U1This is a place where JU101, JU102, R7 (pot) , R4 (pot),m R6
33k and U1 pin 1 connect. </font></div>
<div> </div>
<div><font face="Arial">I'd re-check your connections and DC isolation
first. I know this audio in might have voltage pn it. Or that may be the
tranamit side. Wait! Just noticed something important. Your rxboost=0 on
28739. The amount you're off on the level should easily be made up there.
It WILL make a difference. I just tried with rxboost=0, normal for me, and
noted gain at 13 for that. I changed rxboost=1, restarted asterisk and now
doe the test. Level went to 32000 gain at 0 or 1, and failed. Too high.
Backed it down and it was ok. My point is that rxboost WILL make a
difference for you. Then it is a matter of setting squelch. I look at
radio tune rxsquelch several times and set the squelch point to be about
150 to 200 over the rxnoiselevel (labeled Signal Strength)</font></div>
<div> </div>
<div><font face="Arial">GeorgeC</font></div>
<div><font face="Arial">Node 2360, try connecting when you get
it...</font></div>
<div> </div>
<div> </div>
<div><font face="Arial">Here's my setup:</font></div>
<div> </div>
<div><font face="Arial">[usb2360]</font></div>
<div> </div>
<div><font face="Arial">hdwtype=0<br>rxboost=0<br>txboost=1<br>rxctcssrelax=1<br>txctcssdefault=114.8<br>rxctcssfreqs=114.8<br>txctcssfreqs=114.8<br>rxctcssoverride=0<br>carrierfrom=dsp<br>ctcssfrom=dsp<br>rxdemod=flat<br>
txprelim=yes<br>txlimonly=no<br>txtoctype=notone<br>txmixa=composite<br>txmixb=composite<br>invertptt=0<br>duplex=1<br>rxondelay=0<br>rxnoisefiltype=0<br>rxsquelchdelay=100
; delayline in ms carrier squelch tail eliminator<br>eeprom=0</font></div>
<div> </div>
<div> </div>
<div><font face="Arial">Don't know what else to suggest...</font></div>
<div> </div>
<div><font face="Arial">GeorgeC</font></div>
<blockquote style="BORDER-LEFT:#000000 2px solid;PADDING-LEFT:5px;PADDING-RIGHT:0px;MARGIN-LEFT:5px;MARGIN-RIGHT:0px" dir="ltr">
<div style="FONT:10pt arial">----- Original Message ----- </div>
<div style="FONT:10pt arial;BACKGROUND:#e4e4e4"><b>From:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> </div>
<div style="FONT:10pt arial"><b>To:</b> <a title="george@dyb.com" href="mailto:george@dyb.com" target="_blank">George Csahanin</a> ; <a title="app_rpt-users@ohnosec.org" href="mailto:app_rpt-users@ohnosec.org" target="_blank">APP RPT</a> </div>
<div style="FONT:10pt arial"><b>Sent:</b> Friday, March 29, 2013 12:57
PM</div>
<div style="FONT:10pt arial"><b>Subject:</b> Re: [App_rpt-users]
Something is rotten in the state of Denmark</div>
<div> </div>
<div dir="ltr">
<div style="FONT-FAMILY:'Calibri';FONT-SIZE:12pt">
<div>Goerge, if you take a look at the receiver part of the mrs 2000 you
will see that it connect to the back plane by a connector, those
connection then goes to various part of the repeater for filtering and
tone detection on vairous different cards.. I take the audio signal
directly from pin 5 of the receiver board. I dont see any filtering on
the reciver board. In fact from the service manual that you can
find here (for the vhf receiver) <a href="http://www.repeater-builder.com/motorola/msr2000/pdfs/vhf-msr2000-receiver.pdf" target="_blank"><font face="Times New Roman">http://www.repeater-builder.com/motorola/msr2000/pdfs/vhf-msr2000-receiver.pdf</font></a></div>
<div> </div>
<div>on page 7 there is a block diagram of the receiver and we can
easily see that there is no audio limitting and or filtering at all on
the board. Nad the leevl that I can see on my scope is pretty
close to 250 mv as stated on the service manual..</div>
<div> </div>
<div>I think that the trouble is with my settings..</div>
<div> </div>
<div> </div>
<div>I am working on the 28739 node.</div>
<div> </div>
<div>here is my usbradio.conf file</div>
<div> </div>
<div>[general]</div>
<div> </div>
<div>[usb27821]</div>
<div> </div>
<div>hdwtype=0</div>
<div>rxboost=1</div>
<div>txboost=1</div>
<div>rxctcssrelax=1</div>
<div>txctcssdefault=103.5</div>
<div>rxctcssfreqs=103.5</div>
<div>txctcssfreqs=103.5</div>
<div>;rxctcssoverride=0</div>
<div>carrierfrom=dsp</div>
<div>ctcssfrom=dsp</div>
<div>rxdemod=flat</div>
<div>txprelim=yes</div>
<div>txlimonly=no</div>
<div>txtoctype=no</div>
<div>txmixa=composite</div>
<div>txmixb=composite</div>
<div>invertptt=0</div>
<div>duplex=0</div>
<div>rxondelay=1</div>
<div>rxnoisefiltype=0</div>
<div>eeprom=1</div>
<div> </div>
<div>[usb28739]</div>
<div> </div>
<div>hdwtype=0</div>
<div>rxboost=0</div>
<div>txboost=0</div>
<div>rxctcssrelax=0</div>
<div>txctcssdefault=103.5</div>
<div>rxctcssfreqs=103.5</div>
<div>txctcssfreqs=103.5</div>
<div>;rxctcssoverride=0</div>
<div>carrierfrom=dsp</div>
<div>ctcssfrom=dsp</div>
<div>rxdemod=flat</div>
<div>txprelim=yes</div>
<div>txlimonly=no</div>
<div>txtoctype=no</div>
<div>txmixa=composite</div>
<div>txmixb=composite</div>
<div>invertptt=0</div>
<div>duplex=1</div>
<div>rxondelay=0</div>
<div>rxnoisefiltype=1</div>
<div>eeprom=1</div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div style="FONT:10pt tahoma">
<div> </div>
<div><font size="3" face="Calibri">I did not touch the 27821 one since I put
it down to use one main controler not a machine connected to port 3 of
our rc210, so I know its not ok..</font></div>
<div> </div>
<div> </div>
<div><font size="3" face="Calibri">when i try to tune the base
noise....</font></div>
<div> </div>
<div>ve2mrc*CLI> radio active usb28739</div>
<div>Active (command) USB Radio device set to [usb28739]</div>
<div>ve2mrc*CLI> radio tune rxnoise</div>
<div>tune rxnoise maxtries=12, target=27000, tolerance=2750</div>
<div>tries=0, setting=2, meas=1754</div>
<div>tries=1, setting=16, meas=16505</div>
<div>tries=2, setting=16, meas=17517</div>
<div>tries=3, setting=16, meas=15942</div>
<div>tries=4, setting=16, meas=15816</div>
<div>tries=5, setting=16, meas=16604</div>
<div>tries=6, setting=16, meas=17943</div>
<div>tries=7, setting=16, meas=17805</div>
<div>tries=8, setting=16, meas=15489</div>
<div>tries=9, setting=16, meas=18234</div>
<div>tries=10, setting=16, meas=16747</div>
<div>tries=11, setting=16, meas=17647</div>
<div>DONE tries=12, setting=1000, meas=17647, sqnoise=5040</div>
<div>ERROR: RX INPUT ADJUST FAILED.</div>
<div> </div>
<div><font size="3" face="Calibri">then I set rxtone and rx voice. but I
have a long tail of noise (about 500 ms) before it stop then I have no
sound and the courtesy tone..</font></div>
<div> </div>
<div><font size="3" face="Calibri">I never saved my settings before making
test, would that be the problem? do i need to save the settings every
time I adjust the system so that the settings are used in my
test?</font></div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div style="BACKGROUND:#f5f5f5">
<div><b>From:</b> <a title="george@dyb.com" href="mailto:george@dyb.com" target="_blank">George Csahanin</a> </div>
<div><b>Sent:</b> Friday, March 29, 2013 2:33 AM</div>
<div><b>To:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a>
</div>
<div><b>Subject:</b> Re: [App_rpt-users] Something is rotten in the
state of Denmark</div></div></div>
<div> </div></div>
<div style="FONT-STYLE:normal;DISPLAY:inline;FONT-FAMILY:'Calibri';FONT-SIZE:small;FONT-WEIGHT:normal;TEXT-DECORATION:none">
<div><font face="Arial">Pierre, are you sure that you are getting wideband
noise to the usb device? Before de-emphasis? I am looking at a manual
for a MSR2000 and it shows a "variable gain amplifier (U1) which feeds
the squalch detector, but alsdo feeds a low pass filter on its way to
the noise gate and also feeds a de-emphasis network (U2). Any audio
after that cannot have enough hi frequency component to make the setup
for tune rxnoise work properly, which will not let the squelch work
properly. The long squelch tail you refer to is usbradio not having its
squelch set properly. And that cannot be done without wide band noise
in. The result would never have enough hi freq noise at the uri to
actually squelch the radio. What is eventually kmuting it is the end of
input PL tone...</font></div>
<div> </div>
<div><font face="Arial">Just my thoughts, but I have never had my hands on
a MSR2000. I own one, just haven't received it yet. </font></div>
<div> </div>
<div><font face="Arial">GeorgeC</font></div>
<div><font face="Arial">W2DB</font></div>
<div><font face="Arial">2360</font></div>
<div> </div>
<div> </div>
<blockquote style="BORDER-LEFT:#000000 2px solid;PADDING-LEFT:5px;PADDING-RIGHT:0px;MARGIN-LEFT:5px;MARGIN-RIGHT:0px" dir="ltr">
<div style="FONT:10pt arial">----- Original Message ----- </div>
<div style="FONT:10pt arial;BACKGROUND:#e4e4e4"><b>From:</b> <a title="petem001@hotmail.com" href="mailto:petem001@hotmail.com" target="_blank">Pierre Martel</a> </div>
<div style="FONT:10pt arial"><b>To:</b> <a title="app_rpt-users@ohnosec.org" href="mailto:app_rpt-users@ohnosec.org" target="_blank">APP RPT</a>
</div>
<div style="FONT:10pt arial"><b>Sent:</b> Wednesday, March 27, 2013
9:38 PM</div>
<div style="FONT:10pt arial"><b>Subject:</b> [App_rpt-users]
Something is rotten in the state of Denmark</div>
<div> </div>
<div dir="ltr">
<div style="FONT-FAMILY:'Calibri';FONT-SIZE:12pt">
<div>Got that phrase in the head, and could not find a good title for
the mail ;-)</div>
<div> </div>
<div>Ok Here I am again.</div>
<div> </div>
<div>Still with my project to have a full App_rpt controler for my 2
repeater system.</div>
<div> </div>
<div> </div>
<div>I manage to have our msr 2000 in the shack today cause the exiter
is giving us some trouble.</div>
<div> </div>
<div>so I said, lets fix the exiter AND plug in the URI so that I wont
have to do this on site.</div>
<div> </div>
<div>exiter is ok, well for now...</div>
<div> </div>
<div>So I connect the URI pin 22 (mic AC) to pin 5 of the receiver
inside the msr2000, why 22 there is a big dc bias at this place so
uning the mic dc would nt be wise, I beleive..</div>
<div> </div>
<div>now I go to the computer set active radio usb 28739</div>
<div> </div>
<div>now I do radio tune rxnoise.. It fail.</div>
<div> </div>
<div>there is at leat 200 mv of audio there. changed rxboosst in
usbradio.conf for that node, reload, no difference.</div>
<div> </div>
<div>still did the radio tune rxvoice and rxtone.</div>
<div> </div>
<div>then tested without saving , I have a big white noise at the end
of every receiption before the coutesy tone..</div>
<div> </div>
<div>what Am I doing wrong?</div>
<div> </div>
<div> </div></div></div></blockquote></div></div></div></blockquote></div></div></div></div></blockquote><br>
<fieldset></fieldset> <br><pre>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre></blockquote></div></div></div>
<p>
<hr>
_______________________________________________<br>App_rpt-users mailing
list<br><a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
</p></div></div></div></div><br>_______________________________________________<br>App_rpt-users
mailing list<br><a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br></blockquote></div></div></div></div></div>
</blockquote></div>