<html><body><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div><br></div><div>I'm sure you will get a few reply's but just on the surface I would ask is </div><div>-Do you have CTCSS set a tone as opposed to NO ?</div><div><br></div><div>rxctcssfreqs=no<br></div><div>I think by default the acid install sets it to 100.0 ? but i'm not sure.</div><div></div><div><br></div><div>Also in usbradio.conf</div><div><br></div><div>Make sure your input logic is correct (don't use mine but here are some options)<br></div><div>carrierfrom = </div><div><br></div><div>;carrierfrom=no<br>;carrierfrom=dsp<br>;carrierfrom=pp<br>carrierfrom=ppinvert<br>;carrierfrom=usb<br>;carrierfrom=usbinvert<br>;carrierfrom=vox<br></div><div><br></div><div>ctcssfrom=dsp</div><div><br></div><div>Your usb dongle may be stuck. remove it for a second and plug it back in same place.</div><div>Make sure it assigns the same position as you have described.</div><div><br></div><div>I have a few that get stuck and replaced them. not sure why but it does happen.<br></div><div><br></div><div>...mike/kb8jnm</div><div>29283<br></div><blockquote id="replyBlockquote" webmail="1" style="border-left: 2px solid blue; margin-left: 8px; padding-left: 8px; font-size:10pt; color:black; font-family:verdana;">
<div id="wmQuoteWrapper">
-------- Original Message --------<br>
Subject: [App_rpt-users] A problem I am having<br>
From: "The Rices" <<a href="mailto:srice3@cfl.rr.com">srice3@cfl.rr.com</a>><br>
Date: Fri, May 17, 2013 8:45 am<br>
To: <<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>><br>
<br>
<div dir="ltr"> <div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000"> <div>I am brand new to this and have been reading to see if I can find a solution to the problem I am having.</div> <div>I purchased a URI and installed it with no problems. </div> <div>I set up the computer using acid and it accepted the node and server info and seems to come on line fine.</div> <div>When I connect using allstar it connects to the radio and announces it I am connected.</div> <div>When I use the computer microphone I can hear it come out on the radio fine. </div> <div>BUT when I go to listen there is no audio coming back over the link from the radio.</div> <div>I checked with a scope to be sure I had audio and I do.</div> <div>I ran the radio adjustments for rxnoise and rx voice and it said everything was successful.</div> <div>It did have me adjust the squelch higher though.</div> <div>I made sure to open the 2 ports ssh and the udp so I don’t think it is a port issue on the router.</div> <div>I am sure it is something simple but I am not sure where to look next.</div> <div>Any helpful suggestions for a beginner would be appreciated.</div> <div>Thanks Steve</div></div></div> <hr>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
</div>
</blockquote></span></body></html>