<span style='font-family:Verdana'><span style='font-size:12px'><span style="color: rgb(34, 34, 34); font-family: arial; font-size: small; background-color: rgb(255, 255, 255);">Hi I get two rtcm module for use as voting controller for my repeater as an upgrade from a home-made controller/IDer. Almost all the user of the repeater rely on duplexing (listening to the repeater while you talk). Ever since I put the rtcm module, several are slightly annoyed and confused by the audio delay in the repeater. </span><br style="color: rgb(34, 34, 34); font-family: arial; font-size: small;" /><span style="color: rgb(34, 34, 34); font-family: arial; font-size: small; background-color: rgb(255, 255, 255);">The rtcm modules and the app_rpt server are connected on Ubiquiti with less than 3ms ping directly into a 4 port ethernet switch. I have my chan_voter config set for  180 buffer, and the RTCM TX buffer set at 800 (lowest the console will let me enter), and the delay is great enough to where it's a problem for this type of application.  Is this a matter of using less data-intensive audio codec, or is this RTCM hardware limitation? Maybe to make a firmware upgrade that allows rtcm voting TX buffer to decrease to a acceptable value for this type of full-duplex application? I was exicted to see lastest RTCM firmware update until I realized it would not work with voting. </span><div><span style="color: rgb(34, 34, 34); font-family: arial; font-size: small; background-color: rgb(255, 255, 255);">Sorry for the bad English and Have a nice dayde Harashad </span><div style="color: rgb(34, 34, 34); font-family: arial; font-size: small;"> </div></div></span></span>