<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Wow, all this discussion about macro-oni is getting me hungry!! :-) :-)<br><br>Jim<br><br><div>> From: tim.sawyer@me.com<br>> Date: Tue, 30 Jul 2013 21:33:13 -0700<br>> To: App_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] DTMF Variables<br>> <br>> Assuming you already have the public and private nodes setup, and assuming the private node and public node are connected, on the private node add a macro like so:<br>> <br>> [macros]<br>> 1 = *4xxxxx*329728#<br>> 2 = *4xxxxx*129728#<br>> <br>> where xxxxx = your public node. the # is needed to complete the *4 (ie to terminate remote command)<br>> --<br>> Tim<br>> :wq<br>> <br>> On Jul 30, 2013, at 7:43 PM, Robert Garcia <robert@n5qm.com> wrote:<br>> <br>> > All,<br>> > <br>> > Is it possible to pass a variable via DTMF to a macro? Let me explain my goal..<br>> > <br>> > Private Node <-> Public Hub<br>> > <br>> > I would like a user on the private node to be able to link or unlink<br>> > the hub node without having to go through the *4 remote command<br>> > process to do it.<br>> > <br>> > In practice, I would like to use a macro like *5329728 from the<br>> > Private Node and have the Public Hub connect to node 29728, is this<br>> > possible?<br>> > <br>> > Robert<br>> > N5QM<br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br></div> </div></body>
</html>