<div dir="ltr">Hello everyone,
<div><br></div><div>Can anyone explain in better detail how the remote base operates, as far as users are concerned. i.e. What command do you enter to mover the frequency +500</div><div> </div><div>In the documentation it shows adding? This line amongest others to the rpt.conf file.</div>
<div><br></div><div>719=remote,112 ; Bump +500<br></div><div><br></div><div>so does that mean dial 719 or *719 or?</div><div>Assuming no authentication, and again if you add authentication what does the command look like?</div>
<div><br></div><div>Is it *4node then a command like 719? </div><div><br></div><div>Node is configured as a remote base, shows up with R in the node status page... </div><div>Everything should be right there..</div><div><br>
</div><div><br></div><div>Also for the rpt.conf do I need all of this or am I missing something?</div><div><div>; Serial port for control</div><div>ioport = /dev/ttyS0</div><div>; Radio Type</div><div>remote = ic706</div>
<div>; Function list from link</div><div>functions = remote-functions</div><div>; Function list from phone</div><div>phone_functions = remote-functions</div><div>; Authorization level</div><div>authlevel = 0</div><div>civaddr=98</div>
</div><div><div><br></div><div>duplex=0</div><div>erxgain=-3</div><div>etxgain=3</div><div>;controlstates=controlstates</div><div>scheduler=schedule29626</div><div>morse=morse29626</div><div>macro=macro29626</div><div>functions=functions29626</div>
<div>phone_functions=functions29626</div><div>link_functions=functions29626</div></div><div>link_functions=functions29626<br></div><div><div>telemetry=telemetry</div><div>wait_times=wait-times</div><div>context = radio</div>
<div>callerid = "Repeater" <0000000000></div><div>idrecording = |iKC7DMF</div><div>accountcode=RADIO</div><div>hangtime=100</div><div>althangtime=100</div><div>totime=170000</div><div>idtime=540000</div><div>
politeid=3000</div></div><div><br></div><div>etc...</div><div><br></div><div>Are any of the std lines needed? or just the ones at top?</div><div><br></div><div>Do I need to have all of these or are they built in?</div><div>
<div>[functions-remote]</div><div>0=remote,1 ; Retrieve Memory</div><div>1=remote,2 ; Set freq.</div><div>2=remote,3 ; Set tx PL tone</div>
<div>3=remote,4 ; Set rx PL tone</div><div>40=remote,100 ; Rx PL off</div><div>41=remote,101 ; Rx PL on</div><div>42=remote,102 ; Tx PL off</div>
<div>43=remote,103 ; Tx PL on</div><div>44=remote,104 ; Low Power</div><div>45=remote,105 ; Medium Power</div><div>46=remote,106 ; High Power</div>
<div>711=remote,107 ; Bump -20</div><div>714=remote,108 ; Bump -100</div><div>717=remote,109 ; Bump -500</div><div>713=remote,110 ; Bump +20</div>
<div>716=remote,111 ; Bump +100</div></div><div>713=remote,110 ; Bump +20<br></div><div><div>716=remote,111 ; Bump +100</div><div>719=remote,112 ; Bump +500</div>
<div>721=remote,113 ; Scan - slow</div><div>724=remote,114 ; Scan - quick</div><div>727=remote,115 ; Scan - fast</div><div>723=remote,116 ; Scan + slow</div>
<div>726=remote,117 ; Scan + quick</div><div>729=remote,118 ; Scan + fast</div><div>79=remote,119 ; Tune (brief AM transmission for automatic antenna tuner)</div>
<div>51=remote,5 ; Long status query</div><div>52=remote,140 ; Short status query</div><div>67=remote,210 ; Send a *</div><div>69=remote,211 ; Send a #</div>
<div>91=remote,99,kc7dmf,G ; Remote base login.</div><div>; Define a different dtmf sequence for each user which is</div><div>; authorized to use the remote base to control access to it.</div><div>; For examble 9139583=remote,99,WB6NIL,G would grant access to</div>
<div>; the remote base and announce WB6NIL as being logged in.</div><div>; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to</div><div>; the remote base and announce WA6ZFT as being logged in.</div><div>; When the remote base is disconnected from the originating node, the</div>
<div>; user will be logged out. The LICENSETAG parameter can be optionally specified</div><div>; to enforce TX band limits.</div></div><div><br></div><div><br></div><div><br></div><div><a href="http://www.voip-info.org/wiki/view/Asterisk+config+rpt.conf">http://www.voip-info.org/wiki/view/Asterisk+config+rpt.conf</a><br>
</div><div><a href="http://ohnosec.org/drupal/node/44">http://ohnosec.org/drupal/node/44</a><br></div><div><br></div><div>The second link a bit less clear to me... </div><div><br></div><div>If anyone has an idea, or knows how this is supposed to work, I would appreciate it. Maybe some real world rpt.conf file you could send me, or other files I need to setup as well.</div>
<div><br></div><div>A command example howto...</div><div><br></div><div><br></div><div><br></div><div> Thanks,</div><div><br></div><div><br></div><div> Mark KC7DMF</div></div>