<html>
<body>
Same question,<br>
But also:<br>
How are you adjusting the audio in the radio?<br><br>
The "normal" two places to inject are the MIC input, the second
is the PL input.<br><br>
I can "see" the pot in my head, but don't remember the number
off my head for the deviation pot. You might be up against the
limiter.<br><br>
Mark<br>
KC5EVE<br>
<br>
At 05:12 AM 8/16/2013, Ross Johnson wrote:<br>
<blockquote type=cite class=cite cite="">Hey bob<br>
Where are you injecting the audio? There should be plenty of headroom. Is
the mic still connected?<br>
<br>
Ross<br>
<a href="http://www.kc7rjk.net">www.kc7rjk.net</a> <br>
<br>
<b>From:</b> <a href="mailto:bob@w5evh.org">Bob Roszkowski</a> <br>
<b>Sent:</b> Thursday, August 15, 2013 8:12 PM<br>
<b>To:</b>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<br>
<b>Subject:</b> [App_rpt-users] Mastr II and URI low TX audio<br>
<br>
I have a Mastr II mobile tuned up in the ham bands. Trying to set
the audio levels. RX worked great. Problem with TX audio, I
can only get 2KHz deviation max if I set the level to 999 in
app_rpt. I am using the URI and have wired it to use the 6db
amplifier on board. Anyone else run into this problem?<br><br>
boB - W5EVH<br><br>
<hr>
_______________________________________________<br>
App_rpt-users mailing list<br>
App_rpt-users@ohnosec.org<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" eudora="autourl">
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
_______________________________________________<br>
App_rpt-users mailing list<br>
App_rpt-users@ohnosec.org<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" eudora="autourl">
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></blockquote>
</body>
</html>