<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div>Hi</div><div> </div><div>I am trying to get DTMF from other ALLSTAR nodes to pass to a controller connected to a node.</div><div>My configuration is a beagle board with the controller on port 2 (another controller will ne on port 1 latter).</div><div> </div><div>I have set in the RPT.CONF </div><div> </div><div>linktolink=yes</div><div>propagate_dtmf=yes</div><div> </div><div>On both nodes.</div><div> </div><div>Below I have copied my RPT.CONF information in case I have placed them in the wrong place or I have a syntax error or some other error.</div><div> </div><div>Thank you in advance for any help.</div><div> </div><div> </div><div>Chris</div><div> </div><div> </div><div>; Radio Repeater configuration file (for use with app_rpt)<br>;</div><div><br>;<br>; Your
Repeater<br>;</div><div><br>[29876] ; Change this to your assigned node number</div><div>rxchannel=Beagle/beagle29876<br>duplex=0<br>erxgain=-3<br>etxgain=3<br>;controlstates=controlstates<br>scheduler=schedule29876<br>morse=morse29876<br>macro=macro29876<br>functions=functions29876<br>phone_functions=functions29876<br>link_functions=functions29876<br>telemetry=telemetry<br>wait_times=wait-times<br>context = radio<br>callerid = "Repeater" <0000000000><br>idrecording =
|iN6LXX<br>accountcode=RADIO<br>hangtime=001<br>althangtime=100<br>totime=170000<br>idtime=540000<br>politeid=3000<br>linktolink=yes</div><div>propagate_dtmf=yes<br>idtalkover=|iN6LXX<br>unlinkedct=ct2<br>remotect=ct3<br>linkunkeyct=ct8<br>;nolocallinkct=0<br>;eannmode=1<br>;connpgm=yourconnectprogram<br>;discpgm=yourdisconnectprogram<br>;lnkactenable=0<br>;lnkacttime=1800<br>;lnkactmacro=*52<br>;lnkacttimerwarn=30seconds<br>;remote_inact_timeout=1800<br>;remote_timeout=3600<br>nounkeyct=1<br>;holdofftelem=0<br>beaconing=0<br>;<br>; *** Status Reporting ***<br>;<br>; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org<br>; depending on whether you are running ACID or Limey Linux.</div><div>; ** For ACID ***<br>statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates</div><div>; ** For Limey
Linux **<br>;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates</div><div>;<br>; Morse code parameters, these are common to all repeaters.<br>;</div><div>[morse29876]</div><div>speed=18<br>frequency=800<br>amplitude=4096<br>idfrequency=750<br>idamplitude=1024</div><div>[schedule29876] <br>;dtmf_function = m h dom mon dow ; ala cron, star is implied
</div><div><br>[functions29876]<br>1=ilink,1<br>2=ilink,2<br>3=ilink,3<br>4=ilink,4<br>5=macro,1<br>70=ilink,5<br>71=ilink,6<br>72=ilink,7<br>73=ilink,15<br>74=ilink,16<br>75=ilink,8</div><div>80=status,1<br>81=status,2</div><div>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up<br>0=autopatchdn ; Autopatch down</div><div>989=cop,4<br>980=status,3<br>99=cop,6</div><div>; Place command macros here</div><div>[macro29876]</div><div> </div><div><br>[29877] ; Change this to your assigned node
number</div><div>rxchannel=Beagle/beagle29877<br>duplex=0<br>erxgain=-3<br>etxgain=3<br>;controlstates=controlstates<br>scheduler=schedule29877<br>morse=morse29877<br>macro=macro29877<br>functions=functions29877<br>phone_functions=functions29877<br>link_functions=functions29877<br>telemetry=telemetry<br>wait_times=wait-times<br>context = radio<br>callerid = "Repeater" <0000000000><br>idrecording = |iN6LXX<br>accountcode=RADIO<br>hangtime=100<br>althangtime=100<br>totime=170000<br>idtime=540000<br>politeid=3000<br>linktolink=yes<br>propagate_dtmf=yes<br>idtalkover=|iN6LXX<br>unlinkedct=ct2<br>remotect=ct3<br>linkunkeyct=ct8<br>;nolocallinkct=0<br>;eannmode=1<br>;connpgm=yourconnectprogram<br>;discpgm=yourdisconnectprogram<br>;lnkactenable=0<br>;lnkacttime=1800<br>;lnkactmacro=*52<br>;lnkacttimerwarn=30seconds<br>;remote_inact_timeout=1800<br>;remote_timeout=3600<br>nounkeyct=0<br>;holdofftelem=0<br>beaconing=0<br>;<br>; *** Status Reporting
***<br>;<br>; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org<br>; depending on whether you are running ACID or Limey Linux.</div><div>; ** For ACID ***</div><div>statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates</div><div>; ** For Limey Linux **<br>;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates</div><div>;<br>; Morse code parameters, these are common to all
repeaters.<br>;</div><div>[morse29877]</div><div>speed=18<br>frequency=800<br>amplitude=4096<br>idfrequency=750<br>idamplitude=1024</div><div>[schedule29877] <br>;dtmf_function = m h dom mon dow ; ala cron, star is implied
</div><div><br>[functions29877]<br>1=ilink,1<br>2=ilink,2<br>3=ilink,3<br>4=ilink,4<br>5=macro,1<br>70=ilink,5<br>71=ilink,6<br>72=ilink,7<br>73=ilink,15<br>74=ilink,16<br>75=ilink,8</div><div>80=status,1<br>81=status,2</div><div>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up<br>0=autopatchdn ; Autopatch down</div><div>989=cop,4<br>980=status,3<br>99=cop,6</div><div>; Place command macros
here</div><div>[macro29877]</div><div> </div><div><br>[telemetry]</div><div>ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>ct2=|t(660,880,150,2048)<br>ct3=|t(440,0,150,4096)<br>ct4=|t(550,0,150,2048)<br>ct5=|t(660,0,150,2048)<br>ct6=|t(880,0,150,2048)<br>ct7=|t(660,440,150,2048)<br>ct8=|t(700,1100,150,2048)<br>remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>remotemon=|t(1209,0,50,2048)<br>cmdmode=|t(900,903,200,2048)<br>functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>patchup=rpt/callproceeding<br>patchdown=rpt/callterminated</div><div>;<br>; This section allows wait times for telemetry events to be adjusted<br>; A section for wait times can be defined for every
repeater<br>;</div><div>[wait-times] <br>telemwait=2000<br>idwait=500<br>unkeywait=2000<br>calltermwait=2000</div><div>;<br>; This is where you define your nodes which cam be connected to.<br>;</div><div>[nodes]<br>; Note, if you are using automatic update for allstar link nodes,<br>; no allstar link nodes should be defined here. Only place a definition<br>; for your locak nodes, and private (off of allstar link) nodes here.</div><div>29876 = <a href="mailto:radio@127.0.0.1/29876,NONE">radio@127.0.0.1/29876,NONE</a><br>29877 = <a
href="mailto:radio@127.0.0.1/29877,NONE">radio@127.0.0.1/29877,NONE</a></div><div>; Memories for remote bases</div><div>[memory]</div><div>;00 = 146.580,100.0,m<br>;01 = 147.030,103.5,m+t<br>;02 = 147.240,103.5,m+t<br>;03 = 147.765,79.7,m-t<br>;04 = 146.460,100.0,m<br>;05 = 146.550,100.0,m</div><div><br>#includeifexists custom/rpt.conf</div><div><br> </div></div></body></html>