<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>or +2.2 dBm (referenced against 600 ohms).</div><div><br></div><div>For what it's worth, radio station consoles work normally (at least in all the plants I built or worked in...) at +4 dBm. there is MORE than enough level and adjustability without having to pad, attenuate, or go through gyrations to get this to work. I've interfaced everything from aforesaid consoles to cheap chinese HTs to commercial iron thru URIs with nothing other than wire and connectors to mate the equipment. <br><br>--<div>Bryan</div><div>Sent from my iPhone 5...small</div><div>keyboard, big fingers...please</div><div>forgive misspellings...</div><div><br><div><br></div></div></div><div><br>On Oct 30, 2013, at 14:47, Jon Rorke <<a href="mailto:jrorke@cogeco.ca">jrorke@cogeco.ca</a>> wrote:<br><br></div><blockquote type="cite"><div>
<meta content="text/html; charset=ISO-8859-1" http-equiv="Content-Type">
I dont know why you would want a resistor divider on the VOL/SQ hi
line. It should be ~ 1 V p-p with a signal with 1k tone modulated @
3k dev. This is the perfect level to drive the URI. If it seems its
overdriving the URI then disable the RX boost (RXboost=0) in the
USBradio.conf file. Then retune.<br>
<br>
Jon VA3RQ<br>
<div class="moz-cite-prefix">On 10/30/2013 1:31 PM, Doug Crompton
wrote:<br>
</div>
<blockquote cite="mid:BLU172-W49B44E04EE63ED0FA11AA0BA0A0@phx.gbl" type="cite">
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style>
<div dir="ltr"><font style="" face="Tahoma">Robert,<br>
<br>
The other end goes to ground. It would form a divider from
the hi end of the pot to ground. You would take the audio from
the center of the resistors. I do not have this radio so I
have no idea what the resistor values would be or if you even
need them but I can say you don't want to load that point down
so you wouldn't want the total resistance to be too low. The
upper resistor (closest to the pot) should be the larger value
and the one to ground the lower.<br>
<br>
</font><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br>
</font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br>
</font><font style="font-size:16pt;" size="4"><a class="moz-txt-link-freetext" href="http://www.crompton.com/hamradio">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br>
</font><br>
<br>
<div>
<hr id="stopSpelling">Date: Wed, 30 Oct 2013 12:45:01 -0400<br>
From: <a class="moz-txt-link-abbreviated" href="mailto:N1XBM@amsat.org">N1XBM@amsat.org</a><br>
To: <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] Resistor divider<br>
<br>
I need help, I am using a Mastr II and a URI. I want to use
the vol/sql hi for my discriminator audio. I was going to use
a resistor divider to pad down the audio. <br>
Has anyone ever done this? Could you explain it in more detail
to me. I've read you take the two resistors and put them in
series. I would tap my URI in the middle where those two
resistors meet. I assume one end goes to vol/sql hi, but where
does the far end go?<br>
Thanks for your help<br>
Apparare Scientior <br>
Paratus Communicare<br>
-N1XBM<br>
<br>
_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre>
</blockquote>
<br>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></div></blockquote></body></html>