<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">About a week ago I asked about DMK URI connections to an Alinco radio and I got several responses. I do have a few more questions regarding that. <br><br>The Alinco has both flat and pre/de-emphasized audio available on its data connector as 1200 baud and 9600 baud connections.<br><br>I assume I would use the 1200 baud connections along with COS and PTT for a simple USB interface and the 9600 baud connections along with just the PTT for a DSP interface?<br><br>Do I use the (Alinco 9600 baud) audio to the TX also? Does the DSP pre-emphasize audio or is the processing just on the receive side?<br><br>Why would I want to use one over the other (DSP vs simple USB)? Which is preferred and/or works better? I am thinking there might be some differing opinions here!<br><br>The DMK URI has both mic_DC and mic_AC inputs. Does this refer to frequency response or just that one has DC blocking?<br><br>If you are using flat response (DSP) would the audio in (from the receiver) connections at the URI end matter?<br><br>The DMK URI has both COS and CTSS inputs. Why would you use one over the other? When using DSP I assume neither is needed?</font><br><br><font style="" face="Tahoma">All of the questions above assume I am using the Acid release on a faster processor.</font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font> </div></body>
</html>