<div dir="ltr"><div><font size="1">My node consists of an Intel NUC DCCP847DYE PC Which has an Intel Celeron™ Processor 847(1.10 GHz, 2M Cache)<br></font></div><font size="1">It has 3 USB ports and Video / Audio out are supported by 2 HDMI ports which may be part of my problem. <br>
</font><div dir="ltr" style="font-family:sans-serif"><font size="1">•</font></div><div dir="ltr" style="font-size:9.33333px;font-family:sans-serif">Intel® HD Graphics</div><div dir="ltr" style="font-size:9.33333px;font-family:sans-serif">
•</div><div dir="ltr" style="font-size:9.33333px;font-family:sans-serif">Dual HDMI Ports supporting dual independent display<br><br><div dir="ltr" style="font-size:9.33333px;font-family:sans-serif">Intel® High Definition Audio (Intel® HD Audio) via two </div>
<div dir="ltr" style="font-size:9.33333px;font-family:sans-serif">HDMI 1.4a outputs supporting 8 channel (7.1) digital </div>audio<br><br></div><div style="font-size:9.33333px;font-family:sans-serif">I am running a single node on this pc. The node is operating a UHF repeater. Two radios. Icom Commercial IC-F420 mobiles via a DMK URI. <br>
<br></div><div style="font-size:9.33333px;font-family:sans-serif">I loaded ACID and my system ran fine until I rebooted. This is my second attempt at installation. <br><br></div><div style="font-size:9.33333px;font-family:sans-serif">
I will include my .conf files below. I have PL tones set on radios but am not using COR/COS. I utilize the software to detect PL to trigger TX/RX. <br><br></div><div style="font-size:9.33333px;font-family:sans-serif">
I have a slow blinking green LED on the DMK URI 2-3 flashes per second, when it has failed and is not sending audio to the TX radio(like now). And a nice fast blink pattern when it is working.<br><br></div><div style="font-size:9.33333px;font-family:sans-serif">
Ok...Oh the is keying up with a staticy transmission during ID's and when Flash is run in the radio-tune-menu, but not recognizable audio is heard.<br><br></div><div style="font-size:9.33333px;font-family:sans-serif">
RPT.CONF<br></div><div style="font-size:9.33333px;font-family:sans-serif"><br>[29922] ; Change this to your assigned node number<br><br>rxchannel=Radio/usb29922<br>duplex=2<br>erxgain=-3<br>
etxgain=3<br>;controlstates=controlstates<br>scheduler=schedule29922<br>morse=morse29922<br>macro=macro29922<br>functions=functions29922<br>phone_functions=functions29922<br>link_functions=functions29922<br>telemetry=telemetry<br>
wait_times=wait-times<br>context = radio<br>callerid = "Repeater" <0000000000><br>idrecording = |iAE5YY<br>accountcode=RADIO<br>hangtime=100<br>althangtime=100<br>totime=170000<br>idtime=540000<br>politeid=3000<br>
<br>idtalkover=|iAE5YY<br>unlinkedct=ct2<br>remotect=ct3<br>linkunkeyct=ct8<br>;nolocallinkct=0<br>;eannmode=1<br>;connpgm=yourconnectprogram<br>;discpgm=yourdisconnectprogram<br>;lnkactenable=0<br>;lnkacttime=1800<br>;lnkactmacro=*52<br>
;lnkacttimerwarn=30seconds<br>;remote_inact_timeout=1800<br>;remote_timeout=3600<br>nounkeyct=0<br>;holdofftelem=0<br>beaconing=0<br>;<br>; *** Status Reporting ***<br>;<br>; Uncomment the either group following two statpost lines to report the status of your node to <a href="http://stats.allstarlink.org">stats.allstarlink.org</a><br>
; depending on whether you are running ACID or Limey Linux.<br><br>; ** For ACID ***<br>statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>statpost_url=<a href="http://stats.allstarlink.org/uhandler.php">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
<br>; ** For Limey Linux **<br>;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>;statpost_url=<a href="http://stats.allstarlink.org/uhandler.php">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
<br>;<br>; Morse code parameters, these are common to all repeaters.<br>;<br><br>[morse29922]<br><br>speed=18<br>frequency=800<br>amplitude=4096<br>idfrequency=750<br>idamplitude=1024<br><br>[schedule29922]<br>;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
<br>[functions29922]<br>1=ilink,1<br>2=ilink,2<br>3=ilink,3<br>4=ilink,4<br>5=macro,1<br>70=ilink,5<br>71=ilink,6<br>72=ilink,7<br>73=ilink,15<br>74=ilink,16<br>75=ilink,8<br><br>80=status,1<br>81=status,2<br><br>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up<br>
0=autopatchdn ; Autopatch down<br><br>;989=cop,4<br>980=status,3<br>99=cop,6<br><br>; Place command macros here<br><br>[macro29922]<br><br><br><br>[telemetry]<br><br>ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>
ct2=|t(660,880,150,2048)<br>ct3=|t(440,0,150,4096)<br>ct4=|t(550,0,150,2048)<br>ct5=|t(660,0,150,2048)<br>ct6=|t(880,0,150,2048)<br>ct7=|t(660,440,150,2048)<br>ct8=|t(700,1100,150,2048)<br>remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>
remotemon=|t(1209,0,50,2048)<br>cmdmode=|t(900,903,200,2048)<br>functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>patchup=rpt/callproceeding<br>[wait-times]<br>telemwait=2000<br>idwait=500<br>unkeywait=2000<br>
calltermwait=2000<br><br>;<br>; This is where you define your nodes which cam be connected to.<br>;<br><br>[nodes]<br>; Note, if you are using automatic update for allstar link nodes,<br>; no allstar link nodes should be defined here. Only place a definition<br>
; for your locak nodes, and private (off of allstar link) nodes here.<br><br>29922 = <a href="http://radio@127.0.0.1/29922,NONE">radio@127.0.0.1/29922,NONE</a><br><br>; Memories for remote bases<br><br>[memory]<br><br>;00 = 146.580,100.0,m<br>
;01 = 147.030,103.5,m+t<br>;02 = 147.240,103.5,m+t<br>;03 = 147.765,79.7,m-t<br>;04 = 146.460,100.0,m<br>;05 = 146.550,100.0,m<br><br><br></div><div style="font-size:9.33333px;font-family:sans-serif">USBRADIO.CONF<br>[general]<br>
<br>[usb29922]<br><br>hdwtype=0<br>rxboost=1<br>txboost=1<br>rxctcssrelax=1<br>txctcssdefault=136.5<br>rxctcssfreqs=136.5<br>txctcssfreqs=136.5<br>;rxctcssoverride=0<br>carrierfrom=dsp<br>ctcssfrom=dsp<br>rxdemod=flat<br>
txprelim=no<br>txlimonly=no<br>txtoctype=no<br>txmixa=composite<br>txmixb=no<br>invertptt=0<br>duplex=1<br>rxondelay=0<br>rxnoisefiltype=0<br>eeprom=0<br><br>#includeifexists custom/usbradio.conf<br><br></div><div style="font-size:9.33333px;font-family:sans-serif">
IAX.CONF<br>; Inter-Asterisk eXchange driver definition<br>;<br>;<br><br>[general]<br>bindport=4569<br>bindaddr=0.0.0.0<br>disallow=all<br>allow=gsm<br>allow=g726aal2<br>allow=ulaw<br>jitterbuffer=yes<br>forcejitterbuffer=yes<br>
dropcount=2<br>maxjitterbuffer=4000<br>maxjitterinterps=10<br>resyncthreshold=1000<br>maxexcessbuffer=80<br>minexcessbuffer=10<br>jittershrinkrate=1<br>tos=0x1E<br>autokill=yes<br>delayreject=yes<br>;iaxthreadcount=30<br>
;iaxmaxthreadcount=150<br><br>register=29922:<PASSWORD OMITTED>@<a href="http://register.allstarlink.org">register.allstarlink.org</a><br></div><div style="font-size:9.33333px;font-family:sans-serif"> IN EMAIL for SECURITY<br>
</div><div style="font-size:9.33333px;font-family:sans-serif">[radio-proxy]<br>type=user<br>deny=<a href="http://0.0.0.0/0.0.0.0">0.0.0.0/0.0.0.0</a><br>permit=/<a href="http://255.255.255.255">255.255.255.255</a><br>context=radio-secure-proxy<br>
disallow=all<br>allow=g726aal2<br>transfer=no<br>[radio-proxy-out]<br>type=peer<br>host=<br>username=29922<br>secret=<OMITTED for SECURITY><br>auth=md5<br>disallow=all<br>allow=g726aal2<br>transfer=no<br><br><br>; Incoming radio connections<br>
<br>[radio]<br>type=user<br>disallow=all<br>allow=g726aal2<br>allow=gsm<br>codecpriority=host<br>context=radio-secure<br>transfer=no<br><br>; Incoming phone connections to app_rpt<br><br>;[radio-control]<br>;type=user<br>
;secret=nunya<br>;disallow=all<br>;allow=gsm<br>;codecpriority=host<br>;context=radio-control<br>;transfer=no<br><br>; Setup for outgoing calls<br><br>;[yourprovider] ; This needs to change<br>;type=peer<br>;host=127.0.0.1<br>
;secret=nunya<br>;auth=md5<br>;disallow=all<br>;allow=gsm<br>;transfer=no<br><br>[allstar-sys]<br>type=user<br>context=allstar-sys<br>auth=rsa<br>inkeys=allstar<br>disallow=all<br>allow=ulaw<br><br>[allstar-public]<br>type=user<br>
context=allstar-public<br>auth=md5<br>secret=allstar<br>disallow=all<br>allow=ulaw<br>allow=gsm<br><br></div><div style="font-size:9.33333px;font-family:sans-serif">EXTENSIONS.CONF<br>[general]<br><br>static=yes ; These two lines prevent the command-line interface<br>
writeprotect=yes ; from overwriting the config file. Leave them here.<br><br>[globals]<br>HOMENPA=713<br><br>[default]<br>exten => i,1,Hangup<br><br>[radio-secure]<br>exten => 29922,1,rpt,29922<br><br>[radio-secure-proxy]<br>
exten => 29922,1,rpt,29922|X<br>exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)<br><br>[pstn-out]<br>exten=_NXXNXXXXXX,1,playback(ss-noservice)<br>exten=_NXXNXXXXXX,2,Congestion<br><br>[invalidnum]<br>exten=s,1,Wait,3<br>
exten=s,n,Playback,ss-noservice<br>exten=s,n,Wait,1<br>exten=s,n,Hangup<br><br>[radio]<br>exten=_X11,1,Goto(check_route|${EXTEN}|1);<br>exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)<br>exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)<br>
exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)<br>exten=00,1,Goto(my-ip|s|1)<br><br>[check_route]<br>; no 800<br>exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)<br>exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)<br>exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)<br>
exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)<br>exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)<br>; no X00 NPA<br>exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)<br>; no X11 NPA<br>exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)<br>; no X11<br>
exten=_X11,2,Goto(invalidnum|s|1)<br>; no 555 Prefix in any NPA<br>exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)<br>; no 976 Prefix in any NPA<br>exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)<br>; no NPA=809<br>exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)<br>
; no NPA=900<br>exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)<br><br>; okay, route it<br>exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)<br>exten=_X.,2,Goto(invalidnum|s|1)<br><br>[my-ip]<br>exten=s,1,Set(MYADDR=${CURL(<a href="http://myip.vg">http://myip.vg</a>)})<br>
exten=s,2,Wait,1<br>exten=s,3,SayAlpha(${MYADDR})<br>exten=s,4,Hangup<br><br>[allstar-sys]<br><br>exten => 0,1,Answer<br>exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 <a href="https://config.allstarlink.org/config/start.sh">https://config.allstarlink.org/config/start.sh</a> > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)})<br>
exten => 0,n,Hangup<br><br>exten => _0.,1,Answer<br>exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 <a href="https://config.allstarlink.org/config/start.sh">https://config.allstarlink.org/config/start.sh</a> > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)})<br>
exten => _0.,n,Hangup<br><br>exten => _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)<br>exten => _1.,n,Hangup<br><br>exten => _2.,1,Ringing<br>exten => _2.,n,Wait(3)<br>exten => _2.,n,Answer<br>
exten => _2.,n,Playback(rpt/node)<br>exten => _2.,n,Saydigits(${EXTEN:1})<br>exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)<br>exten => _2.,n,Hangup<br><br>exten => _3.,1,Ringing<br>exten => _3.,n,Wait(3)<br>
exten => _3.,n,Answer<br>exten => _3.,n,Playback(rpt/node)<br>exten => _3.,n,Saydigits(${EXTEN:1})<br>exten => _3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P)<br>exten => _3.,n,Hangup<br><br>exten => _4.,1,Ringing<br>
exten => _4.,n,Wait(3)<br>exten => _4.,n,Answer<br>exten => _4.,n,Playback(rpt/node)<br>exten => _4.,n,Saydigits(${EXTEN:1})<br>exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P)<br>exten => _4.,n,Hangup<br>
<br>exten => _5.,1,Ringing<br>exten => _5.,n,Wait(3)<br>exten => _5.,n,Answer<br>exten => _5.,n,Playback(rpt/node)<br>exten => _5.,n,Saydigits(${EXTEN:1})<br>exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P)<br>
exten => _5.,n,Hangup<br><br>[allstar-public]<br><br>exten => s,1,Ringing<br>exten => s,n,Set(RESP=${CURL(<a href="https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})">https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})</a>})<br>
exten => s,n,Set(NODENUM=${CALLERID(number)})<br>exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)<br>exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)<br>exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)<br>
exten => s,n,Set(CALLSIGN=${RESP:5})<br>exten => s,n,Wait(3)<br>exten => s,n,Playback(rpt/node|noanswer)<br>exten => s,n,Saydigits(${NODENUM})<br>exten => s,n,Set(CALLERID(num)=0)<br>exten => s,n,Set(CALLERID(name)=${CALLSIGN})<br>
exten => s,n,Rpt(${NODENUM}|X)<br>exten => s,n,Hangup<br>exten => s,n(hangit),Answer<br>exten => s,n(hangit),Wait(1)<br>exten => s,n(hangit),Hangup<br><br>exten => 9999,1,Goto(allstar-public|s|1)<br><br>
<br></div><div style="font-size:9.33333px;font-family:sans-serif">USBRADIO_TUNE_USB29922.CONF<br><br>[usb29922]<br>; name=usb29922<br>; devicenum=1<br>devstr=2-1.1<br>rxmixerset=500<br>txmixaset=300<br>txmixbset=500<br>rxvoiceadj=0.500000<br>
rxctcssadj=0.500000<br>txctcssadj=200<br>rxsquelchadj=799<br><br><br></div><div style="font-size:9.33333px;font-family:sans-serif">Please feel free to contact me (William) at any time on my cell @ 832-FIVE 4 4-9810<br>
<br></div><div style="font-size:9.33333px;font-family:sans-serif"><br></div><div style="font-size:9.33333px;font-family:sans-serif"><br><br><br><br></div><div style="font-size:9.33333px;font-family:sans-serif"><br></div></div>