<html><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12pt"><div style="RIGHT: auto"><SPAN style="RIGHT: auto">
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>Im not sure exactly what your explaining so if you havent already <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>done so, try changing<SPAN style="mso-spacerun: yes"> </SPAN>ctcssfrom=dsp to ctcssfrom=no. </FONT><FONT style="RIGHT: auto" face=Verdana> </FONT></div>
<div style="BACKGROUND-COLOR: transparent; FONT-STYLE: normal; MARGIN: 0in 0in 0pt; FONT-FAMILY: Verdana; COLOR: rgb(0,0,0); FONT-SIZE: 16px; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>I thought the blinking light on the URI was the PC heartbeat.<SPAN style="RIGHT: auto; mso-spacerun: yes"> </SPAN></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana><SPAN style="RIGHT: auto; mso-spacerun: yes">Check the CLI </SPAN></FONT><FONT style="RIGHT: auto" face=Verdana>screen when its slow to make sure asterisk starts correctly.<SPAN style="RIGHT: auto; mso-spacerun: yes"> </SPAN><o:p></o:p></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>Also check the sound driver. As root type this command to see if your URI is recognized;<SPAN style="RIGHT: auto; mso-spacerun: yes"> </SPAN></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana><SPAN style="RIGHT: auto; mso-spacerun: yes"></SPAN>[root@yournode~] <I>dmesg<o:p style="RIGHT: auto"></o:p></I></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>somewhere on the screen you should see something like this;<o:p></o:p></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>usb 3-2: configuration #1 chosen from 1 choice<o:p></o:p></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>input: C-Media Electronics Inc.<SPAN style="RIGHT: auto; mso-spacerun: yes"> </SPAN>USB PnP Sound Device as /class/input/input1<o:p></o:p></FONT></div>
<div style="MARGIN: 0in 0in 0pt; RIGHT: auto"><FONT style="RIGHT: auto" face=Verdana>JK<o:p></o:p></FONT></div>
<div style="RIGHT: auto"><BR></SPAN></div>
<div></div>
<div><BR></div>
<DIV style="FONT-FAMILY: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; FONT-SIZE: 12pt">
<DIV style="FONT-FAMILY: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; FONT-SIZE: 12pt">
<DIV style="RIGHT: auto" dir=ltr>
<DIV style="BORDER-BOTTOM: #ccc 1px solid; BORDER-LEFT: #ccc 1px solid; PADDING-BOTTOM: 0px; LINE-HEIGHT: 0; MARGIN: 5px 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; HEIGHT: 0px; FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; BORDER-RIGHT: #ccc 1px solid; PADDING-TOP: 0px" contentEditable=false readonly="true"></DIV><FONT size=2 face=Arial><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> William Schleppegrell <wschleppegrell@gmail.com><BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> app_rpt-users <app_rpt-users@ohnosec.org> <BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, November 13, 2013 6:39 PM<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> [App_rpt-users] No TX audio upon reboot after initial install. Slow DMK URI LED Blink (Detailed info)<BR></FONT></DIV>
<DIV><BR>
<DIV id=yiv3679480466>
<DIV dir=ltr>
<DIV><FONT size=1>My node consists of an Intel NUC DCCP847DYE PC Which has an Intel Celeron™ Processor 847(1.10 GHz, 2M Cache)<BR></FONT></DIV><FONT size=1>It has 3 USB ports and Video / Audio out are supported by 2 HDMI ports which may be part of my problem. <BR></FONT>
<DIV style="FONT-FAMILY: sans-serif" dir=ltr><FONT size=1>•</FONT></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px" dir=ltr>Intel® HD Graphics</DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px" dir=ltr>•</DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px" dir=ltr>Dual HDMI Ports supporting dual independent display<BR><BR>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px" dir=ltr>Intel® High Definition Audio (Intel® HD Audio) via two </DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px" dir=ltr>HDMI 1.4a outputs supporting 8 channel (7.1) digital </DIV>audio<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">I am running a single node on this pc. The node is operating a UHF repeater. Two radios. Icom Commercial IC-F420 mobiles via a DMK URI. <BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">I loaded ACID and my system ran fine until I rebooted. This is my second attempt at installation. <BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">I will include my .conf files below. I have PL tones set on radios but am not using COR/COS. I utilize the software to detect PL to trigger TX/RX. <BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">I have a slow blinking green LED on the DMK URI 2-3 flashes per second, when it has failed and is not sending audio to the TX radio(like now). And a nice fast blink pattern when it is working.<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">Ok...Oh the is keying up with a staticy transmission during ID's and when Flash is run in the radio-tune-menu, but not recognizable audio is heard.<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">RPT.CONF<BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px"><BR>[29922] ; Change this to your assigned node number<BR><BR>rxchannel=Radio/usb29922<BR>duplex=2<BR>erxgain=-3<BR>etxgain=3<BR>;controlstates=controlstates<BR>scheduler=schedule29922<BR>morse=morse29922<BR>macro=macro29922<BR>functions=functions29922<BR>phone_functions=functions29922<BR>link_functions=functions29922<BR>telemetry=telemetry<BR>wait_times=wait-times<BR>context = radio<BR>callerid = "Repeater" <0000000000><BR>idrecording =
|iAE5YY<BR>accountcode=RADIO<BR>hangtime=100<BR>althangtime=100<BR>totime=170000<BR>idtime=540000<BR>politeid=3000<BR><BR>idtalkover=|iAE5YY<BR>unlinkedct=ct2<BR>remotect=ct3<BR>linkunkeyct=ct8<BR>;nolocallinkct=0<BR>;eannmode=1<BR>;connpgm=yourconnectprogram<BR>;discpgm=yourdisconnectprogram<BR>;lnkactenable=0<BR>;lnkacttime=1800<BR>;lnkactmacro=*52<BR>;lnkacttimerwarn=30seconds<BR>;remote_inact_timeout=1800<BR>;remote_timeout=3600<BR>nounkeyct=0<BR>;holdofftelem=0<BR>beaconing=0<BR>;<BR>; *** Status Reporting ***<BR>;<BR>; Uncomment the either group following two statpost lines to report the status of your node to <A href="http://stats.allstarlink.org/" rel=nofollow target=_blank>stats.allstarlink.org</A><BR>; depending on whether you are running ACID or Limey Linux.<BR><BR>; ** For ACID ***<BR>statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<BR>statpost_url=<A href="http://stats.allstarlink.org/uhandler.php"
rel=nofollow target=_blank>http://stats.allstarlink.org/uhandler.php</A> ; Status updates<BR><BR>; ** For Limey Linux **<BR>;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<BR>;statpost_url=<A href="http://stats.allstarlink.org/uhandler.php" rel=nofollow target=_blank>http://stats.allstarlink.org/uhandler.php</A> ; Status updates<BR><BR>;<BR>; Morse code parameters, these are common to all repeaters.<BR>;<BR><BR>[morse29922]<BR><BR>speed=18<BR>frequency=800<BR>amplitude=4096<BR>idfrequency=750<BR>idamplitude=1024<BR><BR>[schedule29922]<BR>;dtmf_function = m h dom mon dow ; ala cron, star is implied<BR><BR>[functions29922]<BR>1=ilink,1<BR>2=ilink,2<BR>3=ilink,3<BR>4=ilink,4<BR>5=macro,1<BR>70=ilink,5<BR>71=ilink,6<BR>72=ilink,7<BR>73=ilink,15<BR>74=ilink,16<BR>75=ilink,8<BR><BR>80=status,1<BR>81=status,2<BR><BR>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch
up<BR>0=autopatchdn ; Autopatch down<BR><BR>;989=cop,4<BR>980=status,3<BR>99=cop,6<BR><BR>; Place command macros here<BR><BR>[macro29922]<BR><BR><BR><BR>[telemetry]<BR><BR>ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<BR>ct2=|t(660,880,150,2048)<BR>ct3=|t(440,0,150,4096)<BR>ct4=|t(550,0,150,2048)<BR>ct5=|t(660,0,150,2048)<BR>ct6=|t(880,0,150,2048)<BR>ct7=|t(660,440,150,2048)<BR>ct8=|t(700,1100,150,2048)<BR>remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<BR>remotemon=|t(1209,0,50,2048)<BR>cmdmode=|t(900,903,200,2048)<BR>functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<BR>patchup=rpt/callproceeding<BR>[wait-times]<BR>telemwait=2000<BR>idwait=500<BR>unkeywait=2000<BR>calltermwait=2000<BR><BR>;<BR>; This is where you define your nodes which cam be connected
to.<BR>;<BR><BR>[nodes]<BR>; Note, if you are using automatic update for allstar link nodes,<BR>; no allstar link nodes should be defined here. Only place a definition<BR>; for your locak nodes, and private (off of allstar link) nodes here.<BR><BR>29922 = <A href="" rel=nofollow target=_blank>radio@127.0.0.1/29922,NONE</A><BR><BR>; Memories for remote bases<BR><BR>[memory]<BR><BR>;00 = 146.580,100.0,m<BR>;01 = 147.030,103.5,m+t<BR>;02 = 147.240,103.5,m+t<BR>;03 = 147.765,79.7,m-t<BR>;04 = 146.460,100.0,m<BR>;05 = 146.550,100.0,m<BR><BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">USBRADIO.CONF<BR>[general]<BR><BR>[usb29922]<BR><BR>hdwtype=0<BR>rxboost=1<BR>txboost=1<BR>rxctcssrelax=1<BR>txctcssdefault=136.5<BR>rxctcssfreqs=136.5<BR>txctcssfreqs=136.5<BR>;rxctcssoverride=0<BR>carrierfrom=dsp<BR>ctcssfrom=dsp<BR>rxdemod=flat<BR>txprelim=no<BR>txlimonly=no<BR>txtoctype=no<BR>txmixa=composite<BR>txmixb=no<BR>invertptt=0<BR>duplex=1<BR>rxondelay=0<BR>rxnoisefiltype=0<BR>eeprom=0<BR><BR>#includeifexists custom/usbradio.conf<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">IAX.CONF<BR>; Inter-Asterisk eXchange driver definition<BR>;<BR>;<BR><BR>[general]<BR>bindport=4569<BR>bindaddr=0.0.0.0<BR>disallow=all<BR>allow=gsm<BR>allow=g726aal2<BR>allow=ulaw<BR>jitterbuffer=yes<BR>forcejitterbuffer=yes<BR>dropcount=2<BR>maxjitterbuffer=4000<BR>maxjitterinterps=10<BR>resyncthreshold=1000<BR>maxexcessbuffer=80<BR>minexcessbuffer=10<BR>jittershrinkrate=1<BR>tos=0x1E<BR>autokill=yes<BR>delayreject=yes<BR>;iaxthreadcount=30<BR>;iaxmaxthreadcount=150<BR><BR>register=29922:<PASSWORD OMITTED>@<A href="http://register.allstarlink.org/" rel=nofollow target=_blank>register.allstarlink.org</A><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px"> IN EMAIL for SECURITY<BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">[radio-proxy]<BR>type=user<BR>deny=<A href="http://0.0.0.0/0.0.0.0" rel=nofollow target=_blank>0.0.0.0/0.0.0.0</A><BR>permit=/<A href="http://255.255.255.255/" rel=nofollow target=_blank>255.255.255.255</A><BR>context=radio-secure-proxy<BR>disallow=all<BR>allow=g726aal2<BR>transfer=no<BR>[radio-proxy-out]<BR>type=peer<BR>host=<BR>username=29922<BR>secret=<OMITTED for SECURITY><BR>auth=md5<BR>disallow=all<BR>allow=g726aal2<BR>transfer=no<BR><BR><BR>; Incoming radio connections<BR><BR>[radio]<BR>type=user<BR>disallow=all<BR>allow=g726aal2<BR>allow=gsm<BR>codecpriority=host<BR>context=radio-secure<BR>transfer=no<BR><BR>; Incoming phone connections to app_rpt<BR><BR>;[radio-control]<BR>;type=user<BR>;secret=nunya<BR>;disallow=all<BR>;allow=gsm<BR>;codecpriority=host<BR>;context=radio-control<BR>;transfer=no<BR><BR>; Setup for outgoing
calls<BR><BR>;[yourprovider] ; This needs to change<BR>;type=peer<BR>;host=127.0.0.1<BR>;secret=nunya<BR>;auth=md5<BR>;disallow=all<BR>;allow=gsm<BR>;transfer=no<BR><BR>[allstar-sys]<BR>type=user<BR>context=allstar-sys<BR>auth=rsa<BR>inkeys=allstar<BR>disallow=all<BR>allow=ulaw<BR><BR>[allstar-public]<BR>type=user<BR>context=allstar-public<BR>auth=md5<BR>secret=allstar<BR>disallow=all<BR>allow=ulaw<BR>allow=gsm<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">EXTENSIONS.CONF<BR>[general]<BR><BR>static=yes ; These two lines prevent the command-line interface<BR>writeprotect=yes ; from overwriting the config file. Leave them here.<BR><BR>[globals]<BR>HOMENPA=713<BR><BR>[default]<BR>exten => i,1,Hangup<BR><BR>[radio-secure]<BR>exten => 29922,1,rpt,29922<BR><BR>[radio-secure-proxy]<BR>exten => 29922,1,rpt,29922|X<BR>exten =>
_0X.,1,Goto(allstar-sys|${EXTEN:1}|1)<BR><BR>[pstn-out]<BR>exten=_NXXNXXXXXX,1,playback(ss-noservice)<BR>exten=_NXXNXXXXXX,2,Congestion<BR><BR>[invalidnum]<BR>exten=s,1,Wait,3<BR>exten=s,n,Playback,ss-noservice<BR>exten=s,n,Wait,1<BR>exten=s,n,Hangup<BR><BR>[radio]<BR>exten=_X11,1,Goto(check_route|${EXTEN}|1);<BR>exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)<BR>exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)<BR>exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)<BR>exten=00,1,Goto(my-ip|s|1)<BR><BR>[check_route]<BR>; no 800<BR>exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)<BR>exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)<BR>exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)<BR>exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)<BR>exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)<BR>; no X00 NPA<BR>exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)<BR>; no X11 NPA<BR>exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)<BR>; no X11<BR>exten=_X11,2,Goto(invalidnum|s|1)<BR>; no 555 Prefix in any
NPA<BR>exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)<BR>; no 976 Prefix in any NPA<BR>exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)<BR>; no NPA=809<BR>exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)<BR>; no NPA=900<BR>exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)<BR><BR>; okay, route it<BR>exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)<BR>exten=_X.,2,Goto(invalidnum|s|1)<BR><BR>[my-ip]<BR>exten=s,1,Set(MYADDR=${CURL(<A href="http://myip.vg/" rel=nofollow target=_blank>http://myip.vg/</A>)})<BR>exten=s,2,Wait,1<BR>exten=s,3,SayAlpha(${MYADDR})<BR>exten=s,4,Hangup<BR><BR>[allstar-sys]<BR><BR>exten => 0,1,Answer<BR>exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 <A href="https://config.allstarlink.org/config/start.sh" rel=nofollow target=_blank>https://config.allstarlink.org/config/start.sh</A> > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)})<BR>exten =>
0,n,Hangup<BR><BR>exten => _0.,1,Answer<BR>exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p /tmp/allstar-config\;curl -sk -m 20 --retry 1 <A href="https://config.allstarlink.org/config/start.sh" rel=nofollow target=_blank>https://config.allstarlink.org/config/start.sh</A> > /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh ${CALLERID(name)})<BR>exten => _0.,n,Hangup<BR><BR>exten => _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)<BR>exten => _1.,n,Hangup<BR><BR>exten => _2.,1,Ringing<BR>exten => _2.,n,Wait(3)<BR>exten => _2.,n,Answer<BR>exten => _2.,n,Playback(rpt/node)<BR>exten => _2.,n,Saydigits(${EXTEN:1})<BR>exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)<BR>exten => _2.,n,Hangup<BR><BR>exten => _3.,1,Ringing<BR>exten => _3.,n,Wait(3)<BR>exten => _3.,n,Answer<BR>exten => _3.,n,Playback(rpt/node)<BR>exten => _3.,n,Saydigits(${EXTEN:1})<BR>exten =>
_3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P)<BR>exten => _3.,n,Hangup<BR><BR>exten => _4.,1,Ringing<BR>exten => _4.,n,Wait(3)<BR>exten => _4.,n,Answer<BR>exten => _4.,n,Playback(rpt/node)<BR>exten => _4.,n,Saydigits(${EXTEN:1})<BR>exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P)<BR>exten => _4.,n,Hangup<BR><BR>exten => _5.,1,Ringing<BR>exten => _5.,n,Wait(3)<BR>exten => _5.,n,Answer<BR>exten => _5.,n,Playback(rpt/node)<BR>exten => _5.,n,Saydigits(${EXTEN:1})<BR>exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P)<BR>exten => _5.,n,Hangup<BR><BR>[allstar-public]<BR><BR>exten => s,1,Ringing<BR>exten => s,n,Set(RESP=${CURL(<A href="https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})" rel=nofollow target=_blank>https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})</A>})<BR>exten => s,n,Set(NODENUM=${CALLERID(number)})<BR>exten =>
s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)<BR>exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)<BR>exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)<BR>exten => s,n,Set(CALLSIGN=${RESP:5})<BR>exten => s,n,Wait(3)<BR>exten => s,n,Playback(rpt/node|noanswer)<BR>exten => s,n,Saydigits(${NODENUM})<BR>exten => s,n,Set(CALLERID(num)=0)<BR>exten => s,n,Set(CALLERID(name)=${CALLSIGN})<BR>exten => s,n,Rpt(${NODENUM}|X)<BR>exten => s,n,Hangup<BR>exten => s,n(hangit),Answer<BR>exten => s,n(hangit),Wait(1)<BR>exten => s,n(hangit),Hangup<BR><BR>exten => 9999,1,Goto(allstar-public|s|1)<BR><BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">USBRADIO_TUNE_USB29922.CONF<BR><BR>[usb29922]<BR>; name=usb29922<BR>; devicenum=1<BR>devstr=2-1.1<BR>rxmixerset=500<BR>txmixaset=300<BR>txmixbset=500<BR>rxvoiceadj=0.500000<BR>rxctcssadj=0.500000<BR>txctcssadj=200<BR>rxsquelchadj=799<BR><BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px">Please feel free to contact me (William) at any time on my cell @ 832-FIVE 4 4-9810<BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px"><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px"><BR><BR><BR><BR></DIV>
<DIV style="FONT-FAMILY: sans-serif; FONT-SIZE: 9.33px"><BR></DIV></DIV></DIV><BR>_______________________________________________<BR>App_rpt-users mailing list<BR><A href="mailto:App_rpt-users@ohnosec.org" ymailto="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</A><BR><A href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target=_blank>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</A><BR><BR><BR></DIV></DIV></DIV></div></body></html>