<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>This sounds like an area that has had little or no experimentation thus far. It will go on my "someday" list. <br><br>tnx<div>Mike / W5JR</div><div>Milton GA</div></div><div><br>On Dec 15, 2013, at 11:00 PM, Mike/W5JR <<a href="mailto:w5jr.lists@att.net">w5jr.lists@att.net</a>> wrote:<br><br></div><blockquote type="cite"><div><meta http-equiv="content-type" content="text/html; charset=utf-8"><div>20wpm applies to Part 97 only.</div><div><br></div><div>Part 90.425(b)(2) states "The Morse code transmission rate shall be maintained between 20 and 25 words per minute."</div><div><br></div><div>Part 95.119(d) states "The station identification must be transmitted in: (1) Voice in the English language; or (2) International Morse code telegraphy." - note no words per minute discussed. </div><div><br></div><div>I've heard many GMRS repeaters (Part 95) rip through at 30+ wpm. </div><div><br></div><div>So, if the change is made and recompiled, will the CW still sound OK or more like the early PROM style MSF5000, i.e, the dot/dash ratio falls apart at a faster speed?</div><div><br>tnx<div>Mike / W5JR</div><div>Milton GA</div></div><div><br>On Dec 15, 2013, at 10:32 PM, Jim W7RY <<a href="mailto:w7ry@centurytel.net">w7ry@centurytel.net</a>> wrote:<br><br></div><blockquote type="cite"><div>
<meta content="text/html; charset=ISO-8859-1" http-equiv="Content-Type">
Yes. I just posted it about 2 hours ago.<br>
<br>
20 WPM.<br>
73<br>
Jim W7RY<br>
<br>
<div class="moz-cite-prefix">On 12/15/2013 6:33 PM, Jim Duuuude
wrote:<br>
</div>
<blockquote cite="mid:BLU180-W769B74363E3B8C5F66068B1D80@phx.gbl" type="cite">
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style>
<div dir="ltr">Isnt there something in part 97 about max speed for
CW id?<br>
<br>
<div>> Date: Sun, 15 Dec 2013 15:30:28 -0600<br>
> From: <a class="moz-txt-link-abbreviated" href="mailto:ars.w5omr@gmail.com">ars.w5omr@gmail.com</a><br>
> To: <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
> Subject: Re: [App_rpt-users] Speaking of CW IDs<br>
> <br>
> On 12/15/2013 03:25 PM, Mike/W5JR wrote:<br>
> > So, there is a "speed=" in the morse stanza. Does it
have a governor on it to limit the speed maximum to 20 wpm? My
entries greater than 20 make no difference. And why would I
want faster than 20 wpm you ask, my HUB nodes are only send
"ID" to web transceivers, and I would like them faster. I have
observed that at 20 wpm, there is a bit of jitter and faster
may not be possible. (An ID I built years ago had a limit on
how fast it could go before the code elements were overrun by
timing)<br>
> ><br>
> <br>
> I've been meaning to ask that same question.<br>
> <br>
> Rules wise, since there's no CW requirement *at all* for
'any' license, <br>
> then there shouldn't be a speed limit on how fast
repeater id's should <br>
> be limited to.<br>
> <br>
> I like my code speed around 30~35wpm these days. I used
to copy NTS <br>
> traffic at 40+wpm. 20wpm is such a '~*yawn*~' bore...<br>
> <br>
> <br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
</pre>
</blockquote>
<br>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></div></blockquote></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></div></blockquote></body></html>