<div dir="ltr">sorry the same problem not audio from radio to internet yet <br></div><div class="gmail_extra"><br><br><div class="gmail_quote">2014-02-08 23:12 GMT+00:00 REDBUTTON_CTRL <span dir="ltr"><<a href="mailto:jrorke@cogeco.ca" target="_blank">jrorke@cogeco.ca</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
OK If you are using packet port (discriminator) then set ctcssfrom=
no<br>
and carrierfrom=dsp<br>
and <br>
rxdemod=flat<br>
<br>
That should get IT working.<br>
<br>
Jon<div><div class="h5"><br>
<br>
On 2/8/2014 6:11 PM, ea8ee wrote:
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div>
<div>I use FT8900 with rear packet minidim with URI DMK <br>
</div>
so I will change<br>
</div>
ctssfrom=no/usb <br>
</div>
carrierfrom=usb or usbinvert/dsp( I think the yaesu use cor
low but anyway the uri work nice with ptt and audio from
internet the problem is only the audio from my rig to internet
is deaf)<br>
</div>
rxdemod=flat/no<br>
<div><br>
</div>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">2014-02-08 22:43 GMT+00:00
REDBUTTON_CTRL <span dir="ltr"><<a href="mailto:jrorke@cogeco.ca" target="_blank">jrorke@cogeco.ca</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> Oh and set
ctcssfrom=no<br>
That way it wont be looking for a tone decoder output to
let audio in.<br>
Jon RQ
<div>
<div><br>
<br>
On 2/8/2014 5:39 PM, REDBUTTON_CTRL wrote:
<blockquote type="cite"> If this is your usb
radio.conf file then it is missing a couple of
things.<br>
<br>
You need the following:<br>
<br>
carrierfrom=usb (or usbinvert if your cor is active
low)<br>
<br>
and the rxdemod must be set to speaker or flat<br>
<br>
That should get tit listening to rx audio to start.<br>
<br>
Jon VA3RQ<br>
<br>
On 2/8/2014 5:31 PM, ea8ee wrote:
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>usb27305<br>
</div>
rxboost=1<br>
</div>
txboost=1<br>
</div>
rxctcssrelax=1<br>
</div>
txctcssdefault=88.5<br>
</div>
rxctcssfreqs=88.5<br>
</div>
;rxctcssoverride=0<br>
</div>
ctcssfrom=usb<br>
</div>
rxdemod=no<br>
</div>
txprelim=no<br>
</div>
txlimonly=no<br>
</div>
txtoctype=notone<br>
</div>
txmixa=composite<br>
</div>
txmixb=composite <br>
</div>
invertptt=0<br>
</div>
duplex=0<br>
</div>
rxondelay=o<br>
</div>
rxnoisefiltype=0<br>
</div>
eeprom=1<br>
<br>
The DMK works nice in TX but in RX not receive
nothing<br>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div><br>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">2014-02-08 20:02
GMT+00:00 Doug Crompton <span dir="ltr"><<a href="mailto:doug@crompton.com" target="_blank">doug@crompton.com</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div dir="ltr"><font face="Tahoma">I think
it found your adapter as you said you
had audio in one direction. If not see
below.<br>
<br>
Did you select the active usb device
in the config utility before you tried
to make changes?<br>
<br>
<br>
If the adapter is not being found at
all try this....<br>
<br>
The following USB interfaces are
defined in usbradio -<br>
<br>
#define C108_VENDOR_ID 0x0d8c<br>
#define C108_PRODUCT_ID 0x000c<br>
#define C108AH_PRODUCT_ID 0x013c<br>
#define C119_PRODUCT_ID 0x0008<br>
#define C119A_PRODUCT_ID 0x013a<br>
#define N1KDO_PRODUCT_ID 0x6a00<br>
#define C108_HID_INTERFACE 3<br>
<br>
When you boot up you should see one of
these initialized in the messages.
After boot do -<br>
<br>
dmesg | more<br>
<br>
and page through and see if it found
your adapter.<br>
<br>
I am using the DMK and it looks like
this -<br>
<br>
[root@WA3DSP_Allstar wa3dsp]# dmesg |
grep Sound<br>
input: C-Media Electronics Inc.
USB PnP Sound Device as
/class/input/input0<br>
input,hidraw0: USB HID v1.00 Device
[C-Media Electronics Inc. USB
PnP Sound Device] on
usb-0000:00:1d.0-1<br>
<br>
</font>
<div><b><font style="font-size:16pt" size="4">73 Doug</font><font style="font-size:16pt" size="4"><br>
</font><font style="font-size:16pt" size="4">WA3DSP</font><font style="font-size:16pt" size="4"><br>
</font><font style="font-size:16pt" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt" size="4"><br>
</font><br>
<br>
</div>
<div>
<hr>From: <a href="mailto:ea8ee1@gmail.com" target="_blank">ea8ee1@gmail.com</a><br>
Date: Sat, 8 Feb 2014 19:14:56 +0000<br>
To: <a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] audio
radio to internet issue
<div>
<div><br>
<br>
<div dir="ltr">I tried with cli
and radio tune rxnoise and the
pc says the device usb27305
currectly not active ! any
suggestion?<br>
<div><br>
<br>
<div>2014-02-08 8:51 GMT+00:00
jose <span dir="ltr"><<a href="mailto:ea8ee1@gmail.com" target="_blank">ea8ee1@gmail.com</a>></span>:<br>
<blockquote style="border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
<div>Hi Doug! the ptt
and audio from
internet to radio
works nicely the
problem is about the
audio from radio to
internet not audio
neither the node
receive the dmtf from
radio or
webstransceiver<br>
<br>
El 08/02/2014 6:31,
Doug Crompton
escribió:<br>
</div>
<div>
<blockquote><font face="Tahoma">You
need to set - <br>
<br>
duplex=1 ;
Simplex, no
telelmetry<br>
duplex=0 ;
Simplex,
telelmetry<br>
<br>
in rpt.conf if you
are running
simplex. <br>
<br>
Also make sure the
polarity is
correct in your
usbradio or
simpleusb file for
the PTT and COS if
you are using it.<br>
</font></blockquote>
<br>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
<br>
</div>
</div>
<div>_______________________________________________
App_rpt-users
mailing list <a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please
visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
and scroll down to the bottom of the
page. Enter your email address and
press the "Unsubscribe or edit
options button" You do not need a
password to unsubscribe, you can do
it via email confirmation. If you
have trouble unsubscribing, please
send a message to the list detailing
the problem.</div>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</pre>
</blockquote>
</div>
</div>
</div>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
and scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via
email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem. <br>
</blockquote>
</div>
<br>
</div>
</blockquote>
</div></div></div>
</blockquote></div><br></div>