<div dir="ltr"><div class="gmail_extra">Hi Michael,<br><br></div><div class="gmail_extra">Thanks
for the information to test the URI. It does not seem the URI is the
issue. I have swapped the URIs with new ones and they all did the same
thing.<br><br></div>I believe this issue is with the PC hardware or software. Might be a USB bus problem. I will look further into it.<div class="gmail_extra"><br clear="all"><div><div dir="ltr"><br><br><br>boB - W5EVH<br>
</div></div>
<br><br><div class="gmail_quote">On Fri, Feb 7, 2014 at 7:45 PM, Michael Hebert <span dir="ltr"><<a href="mailto:mhebert1975@gmail.com" target="_blank">mhebert1975@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><div style="font-family:tahoma,sans-serif">You can try the uridiag program.</div><div style="font-family:tahoma,sans-serif"><br></div><div><div>
<font face="tahoma, sans-serif">Q: How can I test my URI? </font></div><div><font face="tahoma, sans-serif">A: Download the uridiag program located at </font></div><div><font face="tahoma, sans-serif"><a href="http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=tar" target="_blank">http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=tar</a> </font></div>
<div><font face="tahoma, sans-serif">Un-tar it and then ‘make’ it. Run ./uridiag and select option C. That will tell you how to make a </font></div><div><font face="tahoma, sans-serif">loop-back connector for running the diagnostics. This is the same program we use to test each </font></div>
<div><font face="tahoma, sans-serif">URI before it leaves the factory. </font></div><div><font face="tahoma, sans-serif"> </font></div><div><font face="tahoma, sans-serif">Q: How can I make a loop-back cable to test my URI? </font></div>
<div><font face="tahoma, sans-serif">A: Get a male DB-25 connector such as L717SDB25P from <a href="http://www.digikey.com" target="_blank">www.digikey.com</a> . Then wire up </font></div><div>
<font face="tahoma, sans-serif">the following connections: </font></div><div><font face="tahoma, sans-serif">Pin 1 to Pin 7 </font></div><div><font face="tahoma, sans-serif">Pin 2 to Pin 3 </font></div>
<div><font face="tahoma, sans-serif">Pin 4 to Pin 8 </font></div><div><font face="tahoma, sans-serif">Pin 23 to Pin 24 </font></div><div><font face="tahoma, sans-serif">10K Resistor between Pins 21 and 22 </font></div>
<div><font face="tahoma, sans-serif">10K Resistor between Pins 21 and 23 </font></div><div><font face="tahoma, sans-serif">For URIx (CM119) only, also include the following connections: </font></div>
<div><font face="tahoma, sans-serif">Pin 5 to Pin 10 </font></div><div><font face="tahoma, sans-serif">Pin 6 to Pin 11 </font></div><div style="font-family:tahoma,sans-serif"><br>
</div></div></div><div class="gmail_extra"><br><br><div class="gmail_quote"><div><div class="h5">On Fri, Feb 7, 2014 at 3:22 PM, Bob Roszkowski <span dir="ltr"><<a href="mailto:bob@w5evh.org" target="_blank">bob@w5evh.org</a>></span> wrote:<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5"><div dir="ltr"><div>Group,<br><br></div>I have a site that is acting strange. I have a server with a VHF(Mastr II) and UHF(TKR-850) repeater, each with a URI. Both repeaters are linked together locally. I noticed while someone is using the machine, the TX will just stop while they are talking. If I switch to the other repeater, the TX is working fine. The URIs Red LED goes out. This happens to both machines. I have swapped and changed URIs and cables with no change. Any ideas? <br>
<div><div><div><div dir="ltr"><br>boB - W5EVH<br></div></div>
</div></div></div>
<br></div></div>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>
</blockquote></div><br></div></div>