<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">When this happened to me before I solved the problem I think all I had to do was restart Allstar/Asterisk - /usr/local/sbin/astres.sh<br><br>I don't remember removing/reinstalling the DMK. In fact when I did that I don't think it solved the problem.<br><br>You are implying that you think this is directly related to 75/40 meter operation???<br><br>If so proceed with RFI prevention!<br id="FontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">Date: Mon, 10 Feb 2014 12:03:20 -0600<br>From: ars.w5omr@gmail.com<br>To: app_rpt-users@ohnosec.org<br>Subject: Re: [App_rpt-users] Loosing TX<br><br>
<br>
<div class="ecxmoz-cite-prefix">On 02/10/2014 08:34 PM, Doug Crompton
wrote:<br>
</div>
<blockquote cite="mid:BLU172-W40F6C7882FF26A2B16C924BA930@phx.gbl">
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" face="Tahoma">Another thing to
consider on the DMK is RFI. They are very susceptible to it
especially higher power HF but be aware that any RF could
cause problems. I have had this happen at two different
locations. The fix was ferrites on the leads in and out. One
on each lead worked for me but more may be necessary depending
on the severity. You can also wrap multiple turns through a
single ferrite if they fit. <br>
<br>
This shows up a a locked interface and usb error messages that
in my case specifically said EMI? It might not always catch
that it is an EMI problem though so other errors might
indicate the same thing.<br>
<br>
Since the DMK is nothing more than a fancy USB sound FOB I
suspect any FOB might have this problem. Lead length both
audio and USB would also be a factor. </font><br>
</div>
</blockquote>
<br>
Agreed. <br>
<br>
I am curious, though, what voltage is sent back to the USB buss from
the device.<br>
My reasoning is, that in -my- case, when this happened, I noticed
that if I pulled the USB cord, let it set for 15 or 20 seconds, then
plugged it back in, the green light lit up, and as soon as it
Transmitted, that URI died, again. Shutting down the machine, to
the point of letting the caps discharge, etc, then bringing
everything back up, plugged in, all worked flawlessly...<br>
<br>
until, at least, I RF'ed the system again with HF signals from 75
and/or 40m.... ~sigh~<br>
<br>
73 = Best Regards,<br>
-Geoff/W5OMR<br>
<br>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>