<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">From your chart it looks like it is saturating even at very low settings. <br><br>What radio are you using? You must be injecting into a low level mic input. The iradio nput should be able to handle 100's of millivolts to a volt p-p. You need to look at where you are injecting the audio. Also for USB radio it is to a point that is not preemphasized point and for simpleusb to a preemphasized point. <br id="FontBreak"></font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">Date: Wed, 5 Mar 2014 23:17:12 -0600<br>From: n9jpg.ham@gmail.com<br>To: app_rpt-users@ohnosec.org<br>Subject: [App_rpt-users] USB URIx overmodulation problem?<br><br><div dir="ltr"><div><div>I'm using a URIx module with my radio and am in the process of adjusting audio levels. I'm following the well documented procedures to set rx and tx levels but noticed that that choices in txvoice levels have little or no effect. I've made some measurements with my service monitor.<br>
<br>radio tune txvoice 10 >> 0.35Khz deviation<br>radio tune txvoice 14 >> 4.8Khz deviation<br>radio tune txvoice 15 >> 4.8Khz deviation<br>radio tune txvoice 20 >> 5.2Khz deviation<br>radio tune txvoice 100 >> 5.2Khz deviation<br>
radio tune txvoice 500 >> 5.2Khz deviation<br>radio tune txvoice 900 >> 5.2Khz deviation<br><br></div>With a goal of 3KHz deviation, its not possible through settings alone. Any ideas why this is so touchy?<br>
<br></div>thanks<br><div><div><br></div></div></div>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>