<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>I'd add that the difference between line level and mic level is almost 50 dBm...so, removing the boost is a good thing. it will get you into the ballpark. </div><div><br></div><div>As will doing the final setting while referencing a deviation display on a decent service monitor. </div><div><br></div><div>from what i've experienced and done, if you get the levels out of the radio hardware right (line at aprx 0 dBm, mic around -50 dBm, the radio-tune settings can be initially set up to midpoint and you'll be 'in the ballpark' to start the fine tuning. </div><div><br></div><div>IOW, get the hardware signals set...then fine adjust the software.</div><div><br></div><div>At least that's what they taught back in the day. otherwise you will be chasing your tail...<br><br>--<div>Bryan</div><div>Sent from my iPhone 5...small</div><div>keyboard, big fingers...please</div><div>forgive misspellings...</div><div><br><div><br></div></div></div><div><br>On Mar 6, 2014, at 10:35, Jon Rorke <<a href="mailto:jrorke@cogeco.ca">jrorke@cogeco.ca</a>> wrote:<br><br></div><blockquote type="cite"><div>
<meta content="text/html; charset=ISO-8859-1" http-equiv="Content-Type">
An alternate, if you are using USBradio in an ACID distro, you can
specify in the USBradio.conf : <br>
<br>
txboost =0<br>
<br>
I think it defaults to 1 which adds 20 db of level.<br>
<br>
Jon RQ<br>
<br>
<br>
<div class="moz-cite-prefix">On 3/6/2014 9:31 AM, Kevin Oleniczak
wrote:<br>
</div>
<blockquote cite="mid:CAG3Cj+5teo-yE6-4fuv4o7D7jmgxcRQjG_UDTYWgMgCYDiXCMw@mail.gmail.com" type="cite">
<div dir="ltr">
<div>I'm in a "playing" stage with allstar and am only using my
old HT (Yaesu FT-411). All the responses are helpful and
confirm what I was thinking. I'll add an inline pad to knock
the level down. <br>
<br>
</div>
thanks!<br>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On Thu, Mar 6, 2014 at 12:12 AM, Tim
Sawyer <span dir="ltr"><<a moz-do-not-send="true" href="mailto:tim.sawyer@mac.com" target="_blank">tim.sawyer@mac.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Looks like
you are driving your radio’s input to hard. Pad it down to
where it hits 3Khz with a setting closer to 500.<br>
<div>
<div class="h5"><br>
On Mar 5, 2014, at 9:17 PM, Kevin Oleniczak <<a moz-do-not-send="true" href="mailto:n9jpg.ham@gmail.com">n9jpg.ham@gmail.com</a>>
wrote:<br>
<br>
> I'm using a URIx module with my radio and am in the
process of adjusting audio levels. I'm following the
well documented procedures to set rx and tx levels but
noticed that that choices in txvoice levels have little
or no effect. I've made some measurements with my
service monitor.<br>
><br>
> radio tune txvoice 10 >> 0.35Khz deviation<br>
> radio tune txvoice 14 >> 4.8Khz deviation<br>
> radio tune txvoice 15 >> 4.8Khz deviation<br>
> radio tune txvoice 20 >> 5.2Khz deviation<br>
> radio tune txvoice 100 >> 5.2Khz deviation<br>
> radio tune txvoice 500 >> 5.2Khz deviation<br>
> radio tune txvoice 900 >> 5.2Khz deviation<br>
><br>
> With a goal of 3KHz deviation, its not possible
through settings alone. Any ideas why this is so touchy?<br>
><br>
> thanks<br>
><br>
</div>
</div>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a moz-do-not-send="true" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a moz-do-not-send="true" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
><br>
> To unsubscribe from this list please visit <a moz-do-not-send="true" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
and scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do
it via email confirmation. If you have trouble
unsubscribing, please send a message to the list detailing
the problem.<br>
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
<br>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></body></html>