<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body ><div><br></div><div><div class="WordSection1" style="page: WordSection1; "><p class="MsoNormal" style="margin-top: 0in; margin-right: 0in; margin-left: 0in; margin-bottom: 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif; "><o:p> </o:p></p><p class="MsoNormal">I have a few questions on setting up RTCM’s. We have three set up and working on a private node, say 1010. Two are connected to Tait T2020’s (simplex) and one to RLC-4 controller (repeater) . This is a NON-voting configuration for now. We connect node 1010 to our Public Asterisk Node. I have set the node stanza up as follows :<o:p></o:p></p><p class="MsoNormal">rxchannel = Voter/1010<o:p></o:p></p><p class="MsoNormal">duplex = 0<o:p></o:p></p><p class="MsoNormal">hangtime = 1000<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">We can not hear each other on the RTCM’s but we can on the public node. Is there a setting to enable the ability to hear to each RTCM without being connected to the public node?<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">The hang time is also a problem if connected to public node. The RTCM will hang for about 3-4 seconds before dropping.<o:p></o:p></p><p class="MsoNormal">I have done the voter ping’s and worked the formula for the RX and TX buffers. No audio issues thru the public node.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Should the rpt.conf stanza be setup as thought it was another node ie.. telemetry, function, macro’s, etc…?<o:p></o:p></p><p class="MsoNormal">Can someone post a defacto standard node stanza for RTCM’s?<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Thanks for the help.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">-Dave<o:p></o:p></p></div><br><hr></div><div><br></div><div><div style="font-size:9px;color:#575757">Sent from my Galaxy S®III</div></div></body></html>