<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">Kevin,<br><br> You didn't say whether you were using simpleusb or usbradio. For simpleusb you would use AF out and data in for audio, PTTP for PTT and SQL for COR.<br><br>You do need to get the invert non-invert correct for PTT and COR. Both are switchable in the config file. Also if you are using a simplex node make sure you have Duplex=1 (or 0 if you don't want telemetry) in rpt.conf The default is 2 and that often gets people because as soon as OR goes high it goes into PTT as it would in a repeater setting.<br><br>The squelch is usually PL driven in the radio as using just a squelch can give false COR indications with noise etc. I am not sure how that is handled in your radio but the Alinco COR output does follow PL.<br id="FontBreak"></font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">Date: Thu, 13 Mar 2014 22:06:36 -0500<br>From: n9jpg.ham@gmail.com<br>To: app_rpt-users@ohnosec.org<br>Subject: [App_rpt-users] URIx with Icom IC-910 Data Jacks?<br><br><div dir="ltr"><div>Anyone know if either of the Icom data jacks can be used to work with the URIx successfully for a simplex node?<br><br>Documentation notes this:<br><br>DATA IN - Input terminal for data (common for both 1200 and 9600 bps)<br>
GND - Ground line for the DATA IN, DATA OUT and AF OUT.<br>PTTP - Transmits when this terminal is grounded.<br>DATA OUT - Received data output terminal for 9600 bps operation.<br>AF OUT - Received data output terminal for 1200 bps operation.<br>
SQL - Output terminal for squelch condition (Open/Close). Outputs grounded level signal<br>when squelch is opened, +8 V level signal when squelch is closed.<br><br></div>I wired it up but not getting tx audio or rx audio to work. Tried using SQL with the URI COR_DET line. Maybe that's inverted here... <br>
<br>Anyone have luck using this kind of data port to do the interfacing?<br><br>thanks!<br></div>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>