<div dir="ltr">I'm using usbradio and believe i have it all worked out now. Thanks folks for the help. It was a mix of wiring and settings that got it all to work just fine. <br></div><div class="gmail_extra"><br><br><div class="gmail_quote">
On Sat, Mar 15, 2014 at 3:39 PM, Doug Crompton <span dir="ltr"><<a href="mailto:doug@crompton.com" target="_blank">doug@crompton.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div dir="ltr"><font face="Tahoma">Kevin,<br><br> You didn't say whether you were using simpleusb or usbradio. For simpleusb you would use AF out and data in for audio, PTTP for PTT and SQL for COR.<br><br>You do need to get the invert non-invert correct for PTT and COR. Both are switchable in the config file. Also if you are using a simplex node make sure you have Duplex=1 (or 0 if you don't want telemetry) in rpt.conf The default is 2 and that often gets people because as soon as OR goes high it goes into PTT as it would in a repeater setting.<br>
<br>The squelch is usually PL driven in the radio as using just a squelch can give false COR indications with noise etc. I am not sure how that is handled in your radio but the Alinco COR output does follow PL.<br></font><br>
<br><b><font style="font-size:16pt" size="4">73 Doug</font><font style="font-size:16pt" size="4"><br></font><font style="font-size:16pt" size="4">WA3DSP</font><font style="font-size:16pt" size="4"><br></font><font style="font-size:16pt" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt" size="4"><br>
</font><br><br><div><hr>Date: Thu, 13 Mar 2014 22:06:36 -0500<br>From: <a href="mailto:n9jpg.ham@gmail.com" target="_blank">n9jpg.ham@gmail.com</a><br>To: <a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] URIx with Icom IC-910 Data Jacks?<div><div class="h5"><br><br><div dir="ltr"><div>Anyone know if either of the Icom data jacks can be used to work with the URIx successfully for a simplex node?<br>
<br>Documentation notes this:<br><br>DATA IN - Input terminal for data (common for both 1200 and 9600 bps)<br>
GND - Ground line for the DATA IN, DATA OUT and AF OUT.<br>PTTP - Transmits when this terminal is grounded.<br>DATA OUT - Received data output terminal for 9600 bps operation.<br>AF OUT - Received data output terminal for 1200 bps operation.<br>
SQL - Output terminal for squelch condition (Open/Close). Outputs grounded level signal<br>when squelch is opened, +8 V level signal when squelch is closed.<br><br></div>I wired it up but not getting tx audio or rx audio to work. Tried using SQL with the URI COR_DET line. Maybe that's inverted here... <br>
<br>Anyone have luck using this kind of data port to do the interfacing?<br><br>thanks!<br></div>
<br></div></div><div class="">_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div></div> </div></div>
</blockquote></div><br></div>