<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">It is always easier to get things going with simpleusb assuming you have a hardwired cos or ctss line to the URI interface. In many cases usbradio just makes things a whole lot more complicated than it needs to be. If you are using the URI use the COS input (pin 8 as I remember) from the radio. All you need to do is set the COS in simpleusb.conf to invert or non-invert depending on the radio output. Make sure duplex in rpt.conf is set to 1.<br id="FontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">From: kk6ecm@gmail.com<br>Subject: Re: [App_rpt-users] /dev/dsp<br>Date: Tue, 15 Apr 2014 15:15:37 -0700<br>To: doug@crompton.com<br><br><div>Us, all works from that side... The red PTT light does not activate when connected to the radio, even during an I'd transmit. If I send a tone to the radio from CLI, it will light, and come out over the air. It's behavior is confusing. The system responds to COS_det on receive, but no voice comes through, acting like no ctcss detected with =dsp...</div><div><br></div><div>When the computer died, I just loaded up ACID, then copied over the .conf files, and located the URI using lsusb, entering the data in the usbradio_tune... File.<br><br>Thanks,<div>Bob</div><div>kk6ecm</div><div><br></div><div>Sent from iPad<div><div><br></div></div></div></div><div><br>On Apr 15, 2014, at 1:39 PM, Doug Crompton <<a href="mailto:doug@crompton.com">doug@crompton.com</a>> wrote:<br><br></div><blockquote><div>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" face="Tahoma">Well first thing is the URI's green light blinking at a steady rate when asterisk-app_rpt is started? You can also exercise the PTT off and on in the CLI. Do susb ? or radio ? to see commands depending on whether you are using simpleusb or usbradio. Also do you get any errors at the CLI screen or look in /var/log/asterisk/messages? Does 'lsusb' at the linux prompt show that the FOB was detected?<br id="ecxFontBreak"></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="ecxstopSpelling">From: <a href="mailto:kk6ecm@gmail.com">kk6ecm@gmail.com</a><br>Subject: Re: [App_rpt-users] /dev/dsp<br>Date: Tue, 15 Apr 2014 12:35:57 -0700<br>To: <a href="mailto:doug@crompton.com">doug@crompton.com</a><br><br><div>Asterisk is not talking to the radio via the URI for some reason. Is it asterisk, the URI, or the radio? Just trying to eliminate each possible issue. I often feel like I'm shooting in the dark with this system. If it wasn't for this list, and folks like yourself, I'd be totally lost... May be lost anyway, but inputs keep me going :-). I really appreciate your insights and inputs. <br><br>Yes, app_rpt was running... Wondered if I needed turn stop it first. <br><br>Thanks much!<div>Bob</div><div>kk6ecm</div><div><br></div><div>Sent from iPad<div><div><br></div></div></div></div><div><br>On Apr 14, 2014, at 8:56 PM, Doug Crompton <<a href="mailto:doug@crompton.com">doug@crompton.com</a>> wrote:<br><br></div><blockquote><div>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr"><font style="" face="Tahoma">Bob,<br><br> Do you have a reason to run uridiag? Do you suspect your uri is bad? If not there is no reason to run it. Perhaps app_rpt is running also? You would need to run that exclusively. Stop asterisk or reboot without starting it before running uridiag. You would need to make up the test cable as per the DMK site to test it.<br><br>the snd-pcm-oss modules needs to be loaded. It creates /dev/dsp, /dev/mixer<br id="ecxFontBreak"></font><br><font style="" face="Tahoma">modprobe snd-pcm-oss to load</font><font style="" face="Tahoma"><br></font><font style="" face="Tahoma"><br></font><font style="" face="Tahoma">lsmod to check if it is loaded - or ls /dev/dsp - is should be there.</font><font style="" face="Tahoma"><br></font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4"><a href="http://www.crompton.com/hamradio" target="_blank">http://www.crompton.com/hamradio</a></font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="ecxstopSpelling">From: <a href="mailto:kk6ecm@gmail.com">kk6ecm@gmail.com</a><br>To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>Date: Mon, 14 Apr 2014 20:29:42 -0700<br>Subject: [App_rpt-users] /dev/dsp<br><br>
<style><!--
.ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {
font-size:12.0pt;
font-family:"Times New Roman";
}
.ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {
color:blue;
text-decoration:underline;
}
.ExternalClass span.ecxMsoHyperlinkFollowed {
color:purple;
text-decoration:underline;
}
.ExternalClass span.ecxEmailStyle17 {
font-family:Arial;
color:windowtext;
}
.ExternalClass div.ecxSection1 {
}
--></style>
<div class="ecxSection1">
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Any ideas how to solve this one?</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;"> </span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;"># uridiag</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">URIDiag, diagnostic program for the DMK Engineering URI</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">USB Radio Interface, version 0.8, 04/26/11</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;"> </span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Found CM108AH USB Radio Interface at 002/003</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Unable to re-open DSP device 1: /dev/dsp1</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Segmentation fault</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;"> </span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Do I need a loopback?</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;"> </span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Thanks,</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">Bob</span></font></p>
<p class="ecxMsoNormal"><font face="Arial" size="2"><span style="font-size:10.0pt;font-family:Arial;">kk6ecm</span></font></p>
</div>
<br>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div>
</div></blockquote></div> </div>
</div></blockquote></div> </div></body>
</html>