<div dir="ltr">No idea how it got fixed other then multiple reboots later - no PL being heard now that is great!<div>two other issues I have with the voter modules (RTCM) can those devices or can the allstar/asterisk do </div>
<div>CTCSS on rx, I see it can do it on TX but I want it to be my tone decoder - Just seems odd if they cannot</div><div>since it would for a USB device why not here? </div><div><br></div><div>Two, for some reason one radio I have Wouxun the DTMF digits do not work except the 9 when watching the </div>
<div>asterisk -r .... except sometimes if I hold each digit for 2-3 seconds then it does. Is there a setting I can adjust? </div><div>As far as I can tell by the config and listening to my signal levels sound about right/proper deviation etc.</div>
<div>The Baofang works 100% of the time with the briefest of key presses even if I tweak the rx a bit. When I monitor </div><div>the output from the wouxun through the node the tones sound distorted - from the baofang they sound clean. </div>
<div>Maybe it's the radio?</div><div><br></div><div>Thanks,</div><div><br></div><div><br></div><div>Mark</div><div><br></div><div>KC7DMF</div><div><br></div></div><div class="gmail_extra"><br clear="all"><div><div>"Got Root?"</div>
<div><br></div><div><span style="font-family:verdana;font-size:15.625px"><span>How many software engineers does it take to change a light bulb?</span></span></div><div><span style="font-family:verdana;font-size:15.625px;color:rgb(52,52,52)"><b>None. It's a hardware problem.</b></span></div>
<div><br></div><div><br></div><div><span style="font-family:verdana;font-size:15.625px;color:rgb(52,52,52)">Unix is user friendly. It's just very particular about who it's friends are.</span></div><div><span style="font-family:verdana;font-size:15.625px;color:rgb(52,52,52)"><span style="font-size:15.625px">WINDOWS: Will Install Needless Data On Whole System</span></span></div>
<div><span style="font-family:verdana;font-size:15.625px;color:rgb(52,52,52)"><span style="font-size:15.625px"><span style="font-size:15.625px">MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.</span></span></span></div>
<div><span style="font-family:verdana;font-size:15.625px;color:rgb(52,52,52)"><span style="font-size:15.625px"><span style="font-size:15.625px"><br></span></span></span></div><div></div><div><span style="font-family:Arial,Helvetica,Calibri,sans-serif;font-size:14.4676px;color:rgb(57,55,51);line-height:18px"><br>
</span></div><div><span style="font-family:Arial,Helvetica,Calibri,sans-serif;font-size:14.4676px;color:rgb(57,55,51);line-height:18px">A ntennas<br>P oorly<br>P laced<br>L acks<br>E ngineering</span><br><br>The best way to accelerate a computer running Windows is at 9.81 m/s².</div>
<div><br></div><div><span style="line-height:31px"><i style="line-height:15px"><b><u><i><span style="font-size:small"><font color="#FF0000">"I get paid to support Windows, I use Linux to get work done."</font></span></i></u></b></i></span><br>
<br></div></div>
<br><br><div class="gmail_quote">On Thu, May 8, 2014 at 12:07 PM, Mark Johnston <span dir="ltr"><<a href="mailto:markjohnston73@gmail.com" target="_blank">markjohnston73@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><div><div>Hello everyone,</div></div><div><br></div><div>Trying to setup 2 RTCM's for voting - starting off with 1 for the master timing source - no Radio.</div><div>and one currently at the same site for testing purposes, both have GPS configured & working.</div>
<div><br></div><div>The radio is a GE Mastr II base - I located a point where the CTCSS decoder gets the discriminator audio </div><div>and removed the board for CTCSS decode. Plugged in the audio to the RTCM there.</div>
<div><br></div><div>I do hear the audio, but am having multiple issues, first audio sounds OK locally (repeat) but the biggest</div><div>issue there is the PL is loud and plfilter = y in the voter.conf appears to do nothing for that.</div>
<div><br></div><div>Second issue I am not seeing a way to decode PL either in the RTCM or in asterisk from a voter.</div><div>I know with usbradio/simplusb it has the option but from what I know those are not going to do anything here?</div>
<div><br></div><div>also during the RTCM setup the SQ adjustment appears to calibrate go from flashing to solid on the LD3 indicator.</div><div>but when adjusting the SQ pot 10 , 50 , or 150 turns does nothing to extinguish the LD3 as it should, unless I am</div>
<div>misunderstanding the directions - does not make sense. Anyone know if there is something I could be missing?</div><div><br></div><div>below are the rpt.conf (partial) and voter.conf files</div><div><br></div><div>rpt.conf ----</div>
<div><br></div><div><div>[28344] ; Change this to your assigned node number</div><div>rxchannel=voter/28344</div><div>duplex=2 </div><div>;erxgain=-3</div><div>;etxgain=3</div><div>;controlstates=controlstates</div>
<div>scheduler=schedule28344</div><div>morse=morse28344</div><div>macro=macro28344</div><div>functions=functions28344</div><div>phone_functions=functions28344</div><div>link_functions=functions28344</div><div>telemetry=telemetry</div>
<div>wait_times=wait-times</div><div>context = radio</div><div>callerid = "Repeater" <0000000000></div><div>idrecording = |iKC7DMF</div><div>accountcode=RADIO</div><div>hangtime=100</div><div>althangtime=100</div>
<div>totime=530000</div><div>idtime=540000</div><div>politeid=3000</div><div>idtalkover=|iKC7DMF<br></div><div>unlinkedct=ct2</div><div>;discpgm=yourdisconnectprogram</div><div>;lnkactenable=0</div><div>;lnkacttime=1800</div>
<div>;lnkactmacro=*52</div><div>;lnkacttimerwarn=30seconds</div><div>;remote_inact_timeout=1800</div><div>;remote_timeout=3600</div><div>nounkeyct=0</div><div>;holdofftelem=0</div><div>beaconing=0</div><div>linktolink=yes</div>
<div>telemdefault=2</div><div>propagate_dtmf = yes</div><div>propagate_phonedtmf = yes</div><div><br></div><div>;</div><div>; *** Status Reporting ***</div><div><br></div><div>######</div></div><div><br></div><div><br></div>
<div>/etc/asterisk/voter.conf <br></div><div><br></div><div><div>;[general]</div><div><br></div><div>port = 667</div><div>buflen = 500</div><div>password = pwblah</div><div><br></div><div>[28344]</div><div><br></div><div>
1306 = pw1blah,master</div><div>plfilter = y</div><div>thresholds = 255,110=5</div><div>linger=6</div><div>1300 = pw2blah,transmit</div><div>plfilter = y</div><div>thresholds = 255,110=5<br></div><div>linger=10</div></div>
<div><br></div><div>#####</div><div><br></div><div><br></div><div>Thanks,</div><div><br></div><div><br></div><div> Mark KC7DMF</div>
</div>
</blockquote></div><br></div>