<html><body><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div><br><br></div><div>George,</div><div><br></div><div>Yes that will work. You might also need to define the parallel port address in the node stanza for each node.</div><div>And if you think you might use a doug hall rbi-1, start using pins above pp3 (pin 4) then you will not have to redefine the pins when you do that.</div><div><br></div><div>...mike/kb8jnm</div><div><br></div>
<blockquote id="replyBlockquote" webmail="1" style="border-left: 2px solid blue; margin-left: 8px; padding-left: 8px; font-size:10pt; color:black; font-family:verdana;">
<div id="wmQuoteWrapper">
-------- Original Message --------<br>
Subject: [App_rpt-users] use of pp I/O for two nodes in same PC<br>
From: "George Csahanin" <<a href="mailto:george@dyb.com">george@dyb.com</a>><br>
Date: Sun, May 25, 2014 11:14 am<br>
To: <<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>><br>
<br>
<div dir="ltr"> <div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000"> <div>Hey guys, before I start putting this together I have a question. I’m putting two nodes on one PC. One node is the usual repeater. The other is a FT897 type remote base. I really like using the parport for cos/keying. And I want to use the same PC’s port for both radios. As long as I keep the ppx=?? stuff within a particular radios node stanza will it work? Or if I have a ptt specified for one radio do I not have the ability to have another ppx=ppp under the “other node” even if (obviously) different pins for each. Like this:</div> <div> </div> <div> </div> <div> </div> <div>[general]</div> <div> </div> <div>[usb2428]</div> <div> </div> <div>hdwtype=0</div> <div>rxboost=0</div> <div>txboost=1</div> <div>carrierfrom=ppinvert</div> <div>ctcssfrom=no</div> <div>txmixa=voice</div> <div>txmixb=no</div> <div>invertptt=0</div> <div>duplex=0</div> <div>rxondelay=12</div> <div>eeprom=0</div> <div>pp10=cor</div> <div>pp4=ptt</div> <div> </div> <div> </div> <div>[usb28599]</div> <div> </div> <div>hdwtype=0</div> <div>rxboost=0</div> <div>txboost=0</div> <div>carrierfrom=ppinvert</div> <div>ctcssfrom=no</div> <div>txmixa=voice</div> <div>txmixb=voico</div> <div>invertptt=0</div> <div>duplex=0</div> <div>rxondelay=0</div> <div>eeprom=0</div> <div>pp2=ptt</div> <div>pp11=cor</div> <div> </div> <div> </div> <div>So before I go build this up I’m curious about this point. If it won’t fly I’ll add another PC for remote base controller. I have a few D945GCLF boards. I’d move the remote base to one using Limey</div> <div> </div> <div> </div> <div> </div> <div style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">George J Csahanin<br>W2DB<br>Cedar Park, TX<br>512-401-2630 home<br>401-338-0568 cel</div></div></div> <hr>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</div>
</blockquote></span></body></html>